See us at the PMCA Show in Lancaster, PA on 4/15
Home » Cutter Slicer » Chopper/Processor » Page 2
Cutter Slicer Chopper Processor is a classification of equipment that is used to size reduce a wide variety of materials. Cutter, slicer, chopper processing operations can be either done in a batch or continuous manner. This operation can cut the material in several directions to achieve the desired effect in size reduction and consistency. Some machinery has specific operations and has this operation classified to meet a specific operation for size reduction such as a mince master.
JWC, Model 4-SHRED-1-H-2100, shredder. Equipped with 36" long x 36" wide x 24" Deep product feed hopper 48" long strong shafts and severe-duty seals that allows for high-impact solids loading 25 Hp motor drive shredding items down to size and have been proven in many applications including shredding for recycling, preconditioning of organics for waste-to-energy operations and the destruction of off-specification and contraband products. Mounted on multi-leg frame.
OAD: 92"L x 40"W x 73"H
Urschel Model G, Stainless steel, compact dicer rated up to 22,000 lbs per hour – depending on materials and application. Accepts up to 5-1/2" OD product and utilizes slice, crosscut, and circular knifes. Cut thickness: slicing blade 1/8" to 5/8" crosscut knives 9/32" to 3", and circular knives 1/8" to 3", with 15½" Long x 19" Wide x 10½" Deep product hopper, with 2 Hp. Mounted on stainless steel frame. Change parts required to accommodate different size ranges.
OAD: 46" L x 58" W x 45" H
Urschel, Model VSC, Automatic slicer for uniform segment, slab and strip cuts, with pounds of product per hour – depending on materials, application, machine configuration and type cut. Accepts product up to 4" in diameter. Equipped with 5" wide top and bottom product conveyor belts, 5" diameter product cutting / discharge cone. Capable of doing Segment cut types: 3, 4, 5, 6, 7, 8, 10 or 12. Rectangular strips: 7.1mm x 10.3mm to 8.7mm x 11.9mm. Square strips: 4.0mm x 7.5mm to 14.2mm x 25mm and capable of flat slab, bi-slab, cross slabs cuts and coring with segment. Control panel has power on, start, stop, reset and e-stop push buttons with speed dial. Mounted on stainless steel frame with interlock safety doors.Change parts required per different applications and configurations.
OAD: 90" L x 32" W x 57" H
Urschel, Model RAA, Stainless steel USDA approved cutter. Capable of slices, dices, and strip cuts at speeds from 2500 to 5000 lbs. per hour. Equipped with 14" x 15" product infeed and 7" wide product discharge with 46" discharge height. Unit is capable of cutting up to a 3½" diameter log of product. Unit consists of slicing knife capable of 1/16" to 3/8" cuts, circular knife capable of 1/8" to 1" cuts, and crosscut knives capable of 1/16" to 1½" cuts. To cut different size pieces change parts are needed per application. Slicing also requires a change part. Unit mounted on stainless steel base. Last running in a bread operation. Change parts required to accommodate size range.
OAD: 41"L x 40"W x 86"H
Urschel, Model Diversacut 2110, stainless steel, dicer, slicer, strip cutter with inclined feeder used for a variety of food products with number of pounds of product per hour – depending on materials and application. Equipped with 35" x 27" product charge with a 84" high charge, swing open locking access door with safety interrupt switch, crosscut and circular knifes that accept product up to 10" in any dimension and 10" x 14" discharge chute with 32" floor clearence. Control panel has start, stop and e-stop push button controls with 5 Hp stainless steel motor drive. Mounted on stainless steel base frame.
OAD: 60"L x 55"W x 84"H
Urschel, Model DIVERSACUT 2110A, All stainless steel dicer, uniformly dices, strip cuts and slices a wide variety of products at high production with pounds of product per hour – depending on materials and application. Accepts products up to 10" in any dimension. Equipped with product feed hopper, 4 paddle impeller, slicing knife station, slitting knife station and cross cut station. additional features integrated product take away conveyor. Mounted on (4) stainless steel legs with casters.
Types of cuts and slices:
Flat slices:1/16 to 1" Crinkle Slices: 1/8" to 1"Deep Crinkle Slices: 1/8" to 1/2"
Strip cuts: Flat Strip Minimum / Maximum 1/8 x 1/8" to 1 x 1" x length of product. Crinkle strips 9/32 x 9/32" length of product Circular knife cuts: 1/8 to 3" Crosscut knife cuts: 1/8 to 1-1/2" Crosscut knife crinkle cuts: 9/32 to 5/8" Crosscut Knife Deep Crinkle Cuts: 3/8 to 1/2" Crosscut Knife V-Cuts: 5/16 to 1/2"
Shreds: A shredding spindle can be installed in place of the crosscut knife spindle. Shreds will vary depending on number of spacers and shred discsused.
Change parts required to accommodate size range.
OAD: 68" L x 45" W x 50" H
Urschel Model GK-A, Stainless steel, USDA, dicer / slicer / cutter for a variety of food products with volumes of product per hour – depending on materials and application. Utilizes slice, crosscut, and circular knifes with ranges from: 1/8" to 5/8" Slice Thickness, 9/32" to 3" Crosscut, 1/8" to 3" Circular. Continuous motion for uninterupted production and accept products up to 5-1/2" in any dimension. Product is fed thru hopper into a rotating impellor into the blades. Equipped with stainless steel feed hopper, discharge chute, with start / stop buttons controls. Mounted on a stainless steel (4) leg frame. Change parts required for size changes.
OAD: 60" L x 40" W x 50" H
Urschel Model DIVERSACUT 2110, All stainless steel dicer, uniformly dices, strip cuts and slices a wide variety of products at high production with pounds of product per hour – depending on materials and application. Accepts products up to 10" in any dimension. Equipped with product feed hopper with continuous operation for uninterrupted production and is designed for easy cleanup and maintenance. The crosscut knife spindle in conjunction with the other cutting components creates a compact cutting zone establishing precision cuts as the product moves throughout the process. Commonly used for vegetables, fruits, bakery ingredients, dairy inclusions, meat, poultry, seafood, pet food and alternative plant-based products. Mounted on (4) stainless steel legs.
OAD: 66"L x 58"W x 67"H
Urschel Model M, stainless steel, belt fed, dicer, shredder and strip cutter designed for meat products and capable of production rates from 500 to 4,500 lbs per hour – depending on materials and application. Capable of strip cuts from 3/16" to 3" and cross cuts from 1/8" to 4". Equipped with 32" x 9" load area on feed belt and adjustable feed roll allowing for positive product feed at all thicknesses from 3/8" to 1". Mounted on a stainless steel frame. Change parts required to accommodate different configurations and size ranges.
OAD 106"L x 32"W x 43"H
Urschel Model M, stainless steel, belt fed, dicer, shredder and strip cutter designed for meat products and is capable of production rates from 500 to 4,500 lbs per hour – depending on materials and application. Capable of strip cuts from 3/16" to 3" and cross cuts from 1/8" to 4". Equipped with 32" x 9" load area on feed belt and adjustable feed roll allowing for positive product feed at all thicknesses from 3/8" to 1". Mounted on a stainless steel frame with casters. Change parts needed for different configurations and size range changes.
OAD: 120"L x 35"W x 50"H
OAD 106"L x 32"W x 53"H
Urschel, Model RA-D, stainless steel, USDA approved, wash-down dicer / strip-cutter capable of production rates from 5,000 to 8,000 lbs per hour -depending on materials and application. capable of handling product up to 3-1/2" in any dimension. Slice thickness ranges from 1/16" to 3/8", circular knives range from 1/8" to 1" and crosscut knives range from 1/8" to 1-1/2" spacing (all with proper change parts). Equipped with top-mounted 15” long x 14” wide x 18” deep stainless steel product feed hopper. Control panel has start, stop and safety controllers. Mounted on stainless steel frame with locking casters. Change parts required to accommodate size ranges.
OAD: 55"L x 35"W x 111"H
Sign up for our newsletter to receive the latest in packaging tips, case studies and more.