Vertical Machines

Used Vertical Equipment

The process for vertical paste type mixers are usually a batch operation where materials are fed into the mixer along with appropriate liquids and allowed to mix for the consistency required for making the products.

Materials are discharged out of the bottom of the mixer and pumps are used to facilitate removal of this normally stiff products. There are also vertical paste mixers that can be used in a continuous manner to enable dry powders to be metered into the mixer and the appropriate liquids are also metered into the mixer to achieve the required consistency.

Vertical Equipment In Stock

GLASS GMBH & Co Mixer Paste Vertical VSM/F 300

GLASS Model VSM/F 300, is a 300 liter, stainless steel, vertical, vacuum mixer with pounds of product per hour – depending on materials, application, machine configuration and operator dexterity. Equipped with 29" ID x 29" Deep stainless steel mixing bowl, with 90° pnuematic tilt, automatic open and close bolt down cover, has mixing arm and side wall scrapers with hygienic seals and 5 Hp motor drive, integrated vacuum pump. Control panel has touch panel controller with process data recording and run left / right mixing baffle, motor fast, slow with vacuum on / off switch and stop push button controls. Mounted on stainless steel base frame with casters and leveling legs. Used in convience foods, delicacies salad dressings and marinates.

OAD: 90" L x 48" W x 62" H

Get a Free Quote Call: 630-629-9900

J H Day Mixer Paste Vertical PONY

  • Manufacturer: J H Day
  • Model Number: PONY
  • Frain Number: 5B1885

25 gal, J. H. Day Model 2a Pony single motion mixer with a working capacity of 25 Gallons. Has (4) (16"L X 1 1/2"W X 1/2" Thick) single action style mixing paddles. Includes (24"Dia X 14 1/2" Deep) steel mixing can. Unit frame and head are cast iron construction. With adjustable head raising and rotating can mechanism.

Get a Free Quote Call: 630-629-9900

GLASS GMBH & Co Mixer Paste Vertical VSM 300

GLASS Model VSM 300, is a 300 liter, stainless steel, vertical, low pressure cooling jacket, vacuum mixer and meat marinating machine with pounds of product per hour – depending on materials, application, machine configuration and operator dexterity. Equipped with 30" OD x 28" Deep stainless steel mixing bowl, with 90° tilt, and automatic open and close bolt down lid with bottom mixing arms and side wall scrapers with hygienic seals and low pressure cooling jacket with 1-1/4" OD threaded side jacket ports and 5 Hp motor drive with integrated vacuum pump. Control panel has touch panel operation with process data recording and run left / right mixing baffle, motor fast, slow and stop push button controls with vacuum on / off switch. Mounted on stainless steel base frame with leveling legs.

OAD: 102" L x 48" W x 62" H

Get a Free Quote Call: 630-629-9900

J H Day Mixer Paste Vertical PONY 3

  • Manufacturer: J H Day
  • Model Number: PONY 3
  • Frain Number: 5F1490

50 Gallon, dual motion, vertical pony mixer. Bowl dimensions: 28" in Diameter; 20" deep. Equipped with a rotating stainless steel mixing bowl, hand crank adjustable height mixing head, four agitator blades mounted on a spindle, baffle, and A/B start stop contolrs. Spindle rotates in the opposite direction to the rotation of the bowl, providing a planetary mixing action ideal for for viscous and tacky products as well as damp powders.

OAD: 60" L x 42" W x 44" H

Get a Free Quote Call: 630-629-9900

Ross Mixer Paste Vertical DPM-40

  • Manufacturer: Ross
  • Model Number: DPM-40
  • Frain Number: R29011

Ross Model DPM-40 series lll, 40 Gallon, 316 stainless steel, sanitary, atmospheric, double planetary batch mixer with pounds of product per hour – depending on materials and application. Equipped with hydraulic lift mixing head and has 15 Hp motor drive, with self contained pressurized air / oil tank with dry air, dual rectangle mixing blades for low and high viscosity applications suitable for wet or dry blending and has a capacity from 5 to 40 gallons. 8" OD hinged sight / charge port with 6" OD Tri Clover atomizing nozzle port, (2) 2" OD sanitary top and 3" OD light port. Control panel has PLC controller with mixer start, stop, speed decrease, increase, lift raise, lower, light on, off with start, stop, and e-stop controls. 24" in diameter; 24" straight wall stainless steel mixing can with casters. Mounted on heavy duty stainless steel forkable base frame.

OAD: 88" L x 60" W x 83" H

Get a Free Quote Call: 630-629-9900

Goodway Mixer Paste Vertical VBM-2000

  • Manufacturer: Goodway
  • Model Number: VBM-2000
  • Frain Number: 5G9410

Goodway, Model VBM 2000, 304 stainless steel, slurry mixer and transfer system. Rated to 2,000 lb batches with 4 to 9 minutes mix times per batch – depending on materials, application and machine configuration. Equipped with a 44" ID x 52" straight wall stainless steel mixing tank (300 gallons) with half flip up bolt down cover, two stationary stator assemblies one each side and inner rotating mix blades with bottom platform mounted ___ Hp main motor drive and ___ hp secondary motor drive for slow speed mixing while pumping. Waukesha Model 130 postive displacemet transfer pump with 3½"OD / 3"ID seated bevel style inlet/outlet ports with 10" ground clearance and 10 Hp motor drive with a 10:1 ratio gearbox for a discharge rate of 45 gpm. Control panel with push button start / stop for mixer and pump, timer dials for mixer and pump and product valve open / close switch. Mounted on a 96" long x 60" wide stainless steel platform.

OAD: 96"L x 60"W x 84"H

Get a Free Quote Call: 630-629-9900

Goodway Mixer Paste Vertical VBM-1000

  • Manufacturer: Goodway
  • Model Number: VBM-1000
  • Frain Number: 5H1264

Goodway Model 1000 lb or 120 gallon capacity, stainless steel, slurry mixer and transfer system, with number of pound or gallons of product per hour – depending on materials and application. Equipped with 36" OD x 38 Deep, stainless steel, single wall, flat top mixing tank with 2 piece flip top, quick release clamps bolt down cover, with dry / liquid inlet ports. (8) 17" long x 3" wide x 1/2" thick rotating single motion mixing blades and (4) 17" long x 3" wide x 1/2" thick stationary fixed blades each side.. Flat bottom has bottom Flat bottom has bottom tank support assembly with heavy duty gear reducer and 4-1/2" OD pump out discharge port with a Waukeshaw Model 60 PD pump has 3" OD / 2-1/2" ID threaded in/outlet ports. Control panel has start, stop, e-stop push button controls with cycle counter. Mounted on 75" long x 48" wide platform plate base stand. Designed for cake or other batters or to prepare a uniform unaerated premix of ingredients for use with a continous mixer.

OAD: 75" L x 48" W x 66" H

Get a Free Quote Call: 630-629-9900

Mixer Paste Vertical DEAERATOR

  • Model Number: DEAERATOR
  • Frain Number: 5G9653

Stainless steel, 50 gallon, bottom driven deaerator. Equipped with a bolt down cover with (2) 4" diameter sight glasses, 30" diameter x 24" deep vessel, 20" diameter spinning disc powered by a 7½ hp drive, 2½" OD / 2" ID product charge and 7½" OD / 5¾" ID bottom discharge.

OAD: 42"L x 33"W x 49"H

Get a Free Quote Call: 630-629-9900

Ross Mixer Paste Vertical VB001

  • Manufacturer: Ross
  • Model Number: VB001
  • Frain Number: 5H0940

Ross, Model VB-001, 1 FT³, 304 stainless steel, low pressure jacketed, vacuum, vertical mixer. Vessel dimensions: 22" top diameter; 29" deep cone. Equipped with a clamp down cover, electric cone lift powered by a ½ hp drive, (1) 3¾"OD / 3"ID I-Line style charge port, (1) 2¾"ID sight glass, dual action nauta mixer with .33 hp arm drive / ½ hp screw drive and 2" NPT bottom discharge valve with 17" clearance (with cone in the up position). Control panel with independent push button start / stop and variable speed control dials for orbital arm and screw and a raise / off / lower switch for the lift. Mounted on a painted frame.

OAD: 53"L x 36"W x 80"H

Get a Free Quote Call: 630-629-9900

Papenmeier Company Mixer Paste Vertical TSHK

Gunther Papenmeier, TSHK, 75 Liter high intensity low pressure jacketed fluidizing mixer. Equipped with dome top clamshell lid with adjustable angle top entry baffle, 6"diameter illuminated sight glass/charge port and safety limit switch. 20"diameter x 21"deep stainless steel interior, 4-3/4"diameter flush bottom pnumatic discharge. 18"diameter 3-blade bottom scrape propeller and 18-1/2"diameter 3-blade ring guarded upper propeller. Control panel with (2) size 3 starters, analog ammeter, temperature indicator, low/high selector switches. Unit is powered by a 25hp drive and mounted on a 70"long x 32"wide x 4-1/4"high mild steel plate.

OAD: 75"long x 36"wide x 71"high

Get a Free Quote Call: 630-629-9900

Hosokawa Bepex Mixer Paste Vertical NAUTADBX-1500R

  • Manufacturer: Hosokawa Bepex
  • Model Number: NAUTADBX-1500R
  • Frain Number: 5C8512

1,500 liter (53 cu ft) stainless steel vertical auger mixer working capacities from 240 to 1200 liters. Equipped with a 12” diameter auger, multiple top mounted flip-top product ports and 8” ID pneumatic center/side bottom discharge valves.
OAD: 135”(L) x 85”(Diameter.)

Get a Free Quote Call: 630-629-9900

Papenmier Mixer Paste Vertical TSHKV

  • Manufacturer: Papenmier
  • Model Number: TSHKV
  • Frain Number: 5G3950

Gunther Papenmeier, Model TSHKV, 75 Liter high intensity fluidizing mixer. Equipped with dome top clamshell lid with adjustable angle top entry baffle, 6"diameter illuminated sight glass, 2"MNPT inlet port, 3/4"FNPT plugged port and safety limit switch. 20"diameter x 21"deep stainless steel interior, 6-1/2"dia. flush bottom manual discharge. 18"diameter 3-blade scrape bottom propeller and 12"diameter 3-blade high shear upper propeller. Belt driven with 25hp drive. Control panel with digital timer, start/stop switches and run indicator.

OAD: 76"long x 32"wide x 66"high

Get a Free Quote Call: 630-629-9900