See us at the PMCA Show in Lancaster, PA on 4/15
Home » Mixer Powder » Page 6
Commercial and industrial powder mixer equipment and machines encompass a broad range of equipment designed to mix and blend dry:
Powder Mixer equipment and machines are designed to fit their specific mixing and blending application whether it be powder with powder, or liquid with powder, though different types of mixing and mixing processes can be used to mix the same two components together.
The proper powder mixer for an application requires knowledge of the different substances that are to be mixed together as well as their mixing properties. To determine the proper mixer for the application, the desired outcome or end product for the mixing application needs to be known.
Commercial and industrial mixers are mostly batch but some mixing applications, such as powder to liquid, can be continuous. Batch mixers take a certain amount (batch) of product and process it for a certain amount of time.
Once the product is processed, the batch is removed from the mixer and another batch can be placed in the mixer. Continuous mixers move the product through the mixer so that a continuous stream of mixed product is being discharged.
See also: Liquid Mixers
Paul O Abbe, Model RB-10, 10 ft³, double ribbon mixer with amount of product per hour – depending on materials and application. 304 stainless steel contact parts. Inner mixing chamber dimensions of: 39" in Length; 22" in Width; 25" in Depth. Equipped with top mounted product feed hopper with safety grate and flip up / clamp down interlock safety cover and 1½" wide x (3/8)" thick (outer) and 2" wide x ¼" thick (inner) stainless steel ribbons double ribbons powered by 5 Hp drive. Bottom pneumatic flap valve discharge has 16" x 12" flanged bottom with 35" ground clearence. Controls have valve open / close switch and variable speed control and e-stop. Mounted on heavy duty frame.
OAD: 73"L x 38"W x 82"H
Ross, Model 42N-005, 7 ft³ (5 ft³ workable), double ribbon mixer with amount of product per hour – depending on materials and application. 304 stainless steel contact parts. Inner mixing chamber dimensions of: 38" in Length; 17" in Width; 21" in Depth. Equipped with flip up cover, 2½" OD mixing shaft with 1" wide x ¼" thick (outer) and 1½" wide x (1/8)" thick (inner) stainless steel ribbons powered by 10 Hp drive. 3" OD center bottom discharge has slide gate valve with 36" ground clearance.
OAD: 67"L x 32"W x 74"H
Reitz, Model RS-18K5405, Stainless steel 28 ft³ total / 20 ft³ working capacity, twin ribbon mixer with pounds of product per hour – depending on materials and application. Mixing chamber inner dimmensions; 60" in Length; 36" in Width; 25" in Depth total, with dual flip safety grates. Equipped with dual mixing troughs and mixing ribbons set on 4" OD shafts with 2" wide x ½" thick ribbons, dual 5 Hp motor drives with safety guarding and dual air operated end bottom product discharge doors with 36" floor clearance. Mounted on (4) leg base frame.
OAD: 94" L x 55" W x 64" H
Morcos Machinery Model RM600, stainless steel, double ribbon mixer with pounds of product per hour – depending on materials and application. 304L stainless steel construction. Has Maximum bowl capacity of 600 Litres, (21.18 ft³) with minimum mixing capacity of 268 litres (9.464 ft³) and maximum mixing capacity of 500 litres (17.657 ft³). Mixing chamber dimensions: 60" in Length; 24" in Width; 30" in Depth. Equipped with flip up / clamp down cover, with micro-switch safety switch and safety grate with seals for powdered products and 6" OD top product port. (2) levels of spirals, (1) internal anticlockwise and (1) external clockwise has 1¾" wide x (1/8)" thick (outer) and 1¾" wide x (1/8)" thick (inner) stainless steel ribbons powered by 7.3 Hp motor drive. 8" OD center bottom pneumatic discharge gate with 24" ground clearence. Control panel has start, stop push button controls. Mounted on (4) leg stainless steel frame.Granule product with crystal size ranging from 450 microns (17.71 mil.) till 650 microns (25.59 mil.).
OAD: 92" L x 30" W x 64" H
Hayes & Stolz, 32 cubic foot, poly double paddle mixer with pounds of product per hour – depending on materials and application. Chamber dimensions: 71" in Length; 16" in Width; 16" in Depth. Equipped lift up cover, double paddles with dual 4" diameter shafts powered by a 7½ hp drive and bottom end 11" x 9" flanged discharge with 18" floor clearence.
OAD: 115"L x 45"W x 45"H
Morcos Machinery Model RM1000, stainless steel, double ribbon mixer with pounds of product per hour – depending on materials and application. 304L stainless steel construction. Has Maximum bowl capacity of 1000 Litres, (35.31 ft³) with minimum mixing capacity of 441 litres (14.51 ft³) and maximum mixing capacity of 833 litres (29.41 ft³). Mixing chamber dimensions: 70" in Length; 34" in Width; 33" in Depth. Equipped with flip up / clamp down cover, with micro-switch safety switch and safety grate with seals for powdered products and 8" OD top product port. (2) levels of spirals, (1) internal anticlockwise and (1) external clockwise has 2" wide x (1/8)" thick (outer) and 2" wide x (1/8)" thick (inner) stainless steel ribbons (2) levels spirals, (1) internal anticlockwise and (1) external clockwise spiral.powered by 7.3 Hp motor drive. 10 OD center bottom pneumatic discharge gate with 24 ground clearence. Control panel has start, stop push button controls. Mounted on (4) leg stainless steel frame.Granule product with crystal size ranging from 450 microns (17.71 mil.) till 650 microns (25.59 mil.).
OAD: 100" L x 34" W x 82" H
Forberg, Model FZM.7, 304 stainless steel, paddle mixer. Mixing trough dimensions: 16" in Length; 18" in Width; 12" in Depth. Equipped with clamp down flip up cover, (2) sets of (14) angled paddles set on 2" diameter shafts powered by a 1½ hp drive and (2) 3" x 13" discharge ports with 16" ground clearance. Mounted on stainless steel base frame with casters.
OAD: 43"L x 40"W x 38"H
Blentech, Model SH-180A, 100 ft³, 304 stainless steel, ribbon mixer with pounds of product per hour – depending on materials and application. Chamber dimmensions of 155" in Length x 65" in Width x 46" in Depth with flip top covers, 6½" OD center shaft with 3" wide x ¼" thick has single ribbon with 40" OD spokes. 4½" OD / 4" ID Tri-Clamp style center bottom discharge with 8" floor clearence. Mounted on (4) leg frame.
OAD: 192"L x 78"W x 65"H
Stainless steel, 44 ft³ total, (36 ft³ workable) double ribbon mixer with pounds of product per hour – depending on materials and application. 78" long x 30" wide x 36" deep inner mixing chamber dimensions. Equipped with (2) 17" OD product ports with covers, 4½" OD mixing shaft with 1¼" wide x (3/8)" thick (outer) and 2" wide x (1/8)" thick (inner) stainless steel ribbons. 6" OD center bottom discharge with 22" ground clearence. Control panel has start, stop push button controls. Mounted on (4) leg stainless steel frame.
OAD: 135"L x 45"W x 75"H
Ross, model RB42B-18, 18 ft³ workable, double ribbon mixer with 304 stainless steel contact parts and pounds of product per hour – depending on materials and application. Inner mixing chamber dimensions: 60" in Length; 24" in Width; 28" in Depth. Equipped with lift up covers, 2" OD mixing shaft with 1" wide x (3/8)" thick (outer) and 2" wide x ¼" thick (inner) stainless steel ribbons powered by 5.4 Hp motor drive with variable speed control. 4" OD center bottom manual discharge with 36" ground clearence.
OAD: 92"L x 36"W x 86"H
Sign up for our newsletter to receive the latest in packaging tips, case studies and more.