Top Only Machines

Used Top Only Equipment

Top only case sealers are designed to seal the top of a case using hot melt glue. (For information about sealing cases with tape see Sealer Case / Taper.) Top only case sealers are designed to automatically close the minor top flaps of the case, to apply glue to the folded minor flaps or unfolded major flaps, and to close the major flaps. Often, top only case sealers are designed to handle only one size case without manually changing the parameters of the machine.

Top Only Equipment In Stock

Hartness Sealer Case Top Only 1700

  • Manufacturer: Hartness
  • Model Number: 1700
  • Frain Number: 5F6711

Hartness model 1700, automatic, uniform, hot melt glue, top case sealer rated from 5 to 20 cases per minute – depending on materials and application. Case size range: 8" to 28" in Length; 6" to 18" in Width; 4" to 18" in Height. Equipped with 9" wide by 94" long by 14" high infeed / discharge conveyor, Nordson (2) gun hot melt glue system, 36" top case compression section, A/B PLC with touch pad controller with e-stop.

OAD: 100" L x 48" W x 80" H

Get a Free Quote Call: 630-629-9900

ABC Sealer Case Top Only 436

  • Manufacturer: ABC
  • Model Number: 436
  • Frain Number: R30520

ABC Model 436, automatic, continuous motion, top case closer and sealer can be used with hot melt glue and is rated from 10 to 75 cases per minute – depending on materials and application. Capable of handling both RSC, CSSC cases. Case size range: 8" to 24" in Length; 6" to 17" in Width; 4" to 17" in Height (glue), 16" in Height (tape). Equipped with 112" long x 8" wide belt case transfer conveyor with rotary top flap closers and currently set up with Nordson ProBlue hot melt glue systemand has 52" long top, dual side x side 2" wide roller no crush compression section. Remote control panel has A/B servo drive controls with A/B powerflex vari-speed controller, glue / tape and on / bypass / off switches with start / restart and e-stop push buttons. Mounted on stainless steel base frame, with flip up interlock safety door guarding and statis light bar.

OAD: 168" L x 80" W x 72" H

Get a Free Quote Call: 630-629-9900

Wexxar Sealer Case Top Only WF06

  • Manufacturer: Wexxar
  • Model Number: WF06
  • Frain Number: R21642

Automatically folds the top flaps and seals the top of cases (Rsc, Amf, And Hsc) at speeds up to 25 cpm (With hot melt). Case size range: 10" to 22" (Length) 6" to 18" (Width) 5" to 20" (Height). Equipped with side mounted belt conveyors, mechanical flap folders, quick size adjustments (2 minutes), random skip gap glue patterning, Nordson 3500 hot melt glue unit and static compression. Last run in a pharmaceutical operation.
OAD: 80" L x 38"W x 70" H

Get a Free Quote Call: 630-629-9900

ABC Sealer Case Top Only 36

  • Manufacturer: ABC
  • Model Number: 36
  • Frain Number: 5F6774

ABC Model 36, automatic, hot melt glue, top case sealer rated from 10 to 35 cases per minute – depending on materials and application. Case size range: 10" to 22" in Length; 6" to 17" in Width; 4" to 17" in Height. Equipped with 120" long x 28" wide belt and roller case transfer conveyor with top flap closing plows and rear flap tuckers, hot melt glue system, 24" long top and bottom compression discharge and lexan saftey guarding.

OAD: 132" L x 48" W x 65 "H

Get a Free Quote Call: 630-629-9900

ABC Sealer Case Top Only 36

  • Manufacturer: ABC
  • Model Number: 36
  • Frain Number: 5F6775

ABC Model 36, automatic, hot melt glue, top case sealer rated from 10 to 35 cases per minute – with speeds depending on materials and application. Case size range: 10" to 22" in Length; 6" to 17" in Width; 4" to 17" in Height. Equipped with 120" long x 28" wide belt and roller case transfer conveyor with top flap closing plows and rear flap tuckers, hand crank adjustable, with hot melt glue system (needs hot melt) 24" long top and bottom compression discharge, start / stop buttons and is mounted on painted steel base frame, with flip up lexan saftey door guarding.

OAD: 120" L x 48" W x 65 "H

Get a Free Quote Call: 630-629-9900

SWF Sealer Case Top Only 2D2

  • Manufacturer: SWF
  • Model Number: 2D2
  • Frain Number: 5B5063

Automatic side flange, bliss case / tray sealer rated from 5 to 35 cases / trays per minute – depending on materials and application. Case size range: 9" to 33" in Length; 10" to 16" in Width; 4-1/2" to16" in Depth. Equipped with positive control flite bar case indexing system, mechanical leading and trailing flap closure, hot melt glue applicators and compression discharge.

OAD = 130" L x 60" W x 60" H

Get a Free Quote Call: 630-629-9900

Wexxar Sealer Case Top Only WSH-060

  • Manufacturer: Wexxar
  • Model Number: WSH-060
  • Frain Number: R26370

Wexxar, Model WSH-060, automatic inline top hot melt glue sealer. Rated from 5 to 20 cases per minute – depending materials, application and machine configuration. Case size range: 10" to 28" in Length; 8.5" to 20" in Width; 6" to 24" in Height (major flaps must be 12" high in the up position to activate eye). Equipped with pneumatic gate, 42" long x 8" wide side belts, single ram arm minor flap closer, Nordson hot melt glue unit and 27" long dual side roller discharge section. A/B CPU, has ram arm, glue, jog and run control switches with start and e-stop buttons and safety guarding.

OAD: 107" L x 52" W x 86" H Case Erector

Get a Free Quote Call: 630-629-9900

Sig Sealer Case Top Only FMD

  • Manufacturer: Sig
  • Model Number: FMD
  • Frain Number: 5G3751

Automatic, random, top tray / case sealer H/M speeds depending on application. Has a case size range of : " – " L x " – " W x " – " H, with dual 105" L x 3" W lugged case transfer conveyors, set on 45" centers, that feed thru automatic minor flap closer and kicker to, major flap plows, H/M seal, (Needs Hot Melt), automatic pneumatic adjustable, control panel has a A/B Logix 5555 CPU, with Sig swing arm controller, statis light bar, and saftey gaurding.

OAD: 105" L x 80" W x 79" H

Get a Free Quote Call: 630-629-9900

Sig Sealer Case Top Only FMD

  • Manufacturer: Sig
  • Model Number: FMD
  • Frain Number: 5G3749

Automatic, random, top tray / case sealer H/M speeds depending on application. Has a case size range of : " – " L x " – " W x " – " H, with dual 105" L x 3" W lugged case transfer conveyors, set on 45" centers, that feed thru automatic minor flap closer and kicker to, major flap plows, H/M seal, (Needs Hot Melt), automatic pneumatic adjustable, control panel has a A/B Logix 5555 CPU, with Sig swing arm controller statis light bar, and saftey gaurding.

OAD: 105" L x 80" W x 79" H

Get a Free Quote Call: 630-629-9900

SWF Sealer Case Top Only 2D4B

  • Manufacturer: SWF
  • Model Number: 2D4B
  • Frain Number: 5D6944

Fully automatic top flap case sealer capable of up to 35 cases per minute and cases (8" – 24")L, (9" – 16")W, and (4 1/2" – 16")H. Features a two hot melt glue systems with temperature controls, and and integrated box spacer. Equipped with a 54"L chain conveyor infeed adjustable from (4" – 26")H, and a 44"L outfeed roller conveyor with case top hold-down. The machine closes the front and back flaps, applies glue to the side flaps, and uses plows to close the size flaps. Mounted on a painted steel base.

OAD: 174"L x 60"W x 59"H

Get a Free Quote Call: 630-629-9900

Bemis Sealer Case Top Only 102344

  • Manufacturer: Bemis
  • Model Number: 102344
  • Frain Number: 5D3217

Bemis automatic, top flap case closer and hot melt glue sealer. Case size range: 6" to 24" in Length; 5" to 18" in Width: 4-1/2" to 20" in Height. Equipped top flap closers and plows, 70" roller conveyor with case side belts and hot melt glue system. Speed dependant on materials, application and machine configuration.

OAD: 120" L x 56" W x 58" H

Get a Free Quote Call: 630-629-9900

SWF Sealer Case Top Only CS100SFK/2D2K

  • Manufacturer: SWF
  • Model Number: CS100SFK/2D2K
  • Frain Number: 5F7792

SWF Model CS100SFK / 2D2K, side flange case glue sealer rated from 10 to 35 cases per minute – depending on materials and application. Cases size: 8-3/4" to 33" in Length; 10" to 16" in Width; 4-3/8" to 16" in Height and Flange: 1-1/8" to 1-3/4". Equipped with 56" long chain in feed conveyor to case roller conveyor with pusher bar, arm lid flap closes the front and back flaps, two gun hot melt glue system, top presure rails with dual side roller compression and discharge section height and wide adjustable. Control panel with start, stop jog, run, re-set controls with e-stop and mounted base frame. Operation: machine closes the front and back flaps, applies glue to the side flaps, and uses plows to close the side flaps.

OAD: 160" L x 70"W x 84" H

Get a Free Quote Call: 630-629-9900