Used Shrink Equipment
Looking for a used shrink wrap machine for sale? You’ve come to the right place.
Shrink wrapping equipment or shrink packaging equipment is designed to package products or packages within a film that is subsequently heat shrunk around the product or package to create a very tight seal with the package.
Shrink wrapping is sometimes used as the primary packaging. Some individual foods, soaps and other products may be wrapped directly. More commonly shrink wrapping is used as a secondary or tertiary packaging. An example of secondary use is shrink wrapped six-packs of beverage cans or 24 pack bundles of water.
Wrapping is also commonly used as a tertiary packaging such as overwrapping an individual carton or bundle of cartons. In the past, appearance of the tertiary packaging has not been considered critical important as the customer never saw it. The rise of club stores like Costco and Sam’s Club has changed this. The 6 pack of canned corn is now the unit of sale in these stores and appearance has become critical to branding. Previously translucent grey film was fine since nobody outside of the stockroom was likely to see it. Now, glossy film with registered graphics is needed to catch the customer’s eye using bullseye or end seal wrapping. This affects the choices of machinery that can be used.
Download the complete Shrink Wrapping Whitepaper to continue learning about different types of wrappers.
One important consideration when selecting the proper a shrink packaging machine is the type of shrink package that is desired around the product. L-bar sealer shrink packaging equipment forms a film seal around a product that has three side seams, one the front of the package and one on each side of the package. Flow thru shrink packaging equipment forms a shrink film package from a single roll of shrink film that has an overlapped shrink film seal underneath the package and a cross seal on the front and back sides of the package. Shrink bundler packaging equipment forms a shrink film package around the product from two rolls of shrink film which has cross seam across the front and back sides of the package and openings in the film package on the left and right sides of the package.
Once a product has been wrapped in shrink film, the product passes through a heat shrink tunnel. The heat from the heat shrink tunnel causes the film to shrink around the product forming a tight package around the product.
Browse our used shrink wrap machines for sale or contact Frain today to discuss your project.
Shrink Equipment In Stock
- Manufacturer: Arpac
- Model Number: HC37
- Frain Number: R30400
Arpac Model HC37, horizontal, continuous motion, servo driven, flow thru shrink wrapper and bottom lap sealer rated from 0 to 90 linear feet and 0 to 80 packages per minute – depending on materials, application and product stability. Product size range: 3-1/2" to per application in Length; up to 16" in Width; up to 7-1/2" horizontal jaws and up to 12" vertical jaws in Height. Equipped with 245" long Lugged servo driven in feed conveyor with 1/2" wide x 1" high lugs set on 16" centers with adjustable guide rails into the flow wrapper forming plow, with 19" long 9-1/2" wide vacuum conveyor pulling film and product to 32" long x 9-1/2" wide neophreme belt conveyor thru the 17" wide interchangeable horizontal or vertical cross seal jaws and overlapping bottom film static lap seal to the discharge. Centerfold film maximum width up to 37" and film roll maximum OD up to 14" and has 38" long servo driven film rolls with perf wheels. Control panel has A/B CPU and A/B panelview controller with seal bar and lap seal temperature controllers, manual / jog, cycle start and on / off with e-start, Mounted on (4) leg base frame with interlock safety door guarding.
OAD: 84" L x 64" W x 78" H Flow Thru Sealer
245" L x 36" W x 36" H In Feed Conveyor
- Manufacturer: Arpac
- Model Number: TS37/XT18
- Frain Number: R30181
Arpac Model TS37 and XT18, horizontal continuous motion, side seal shrink wrapper and tunnel rated from 0 to 90 linear feet and 0 to 80 packages per minute – depending on materials, application and product stability. Product size range: 3-1/2" to 60" in Length; 2" to 16" in Width; 1/4" to 7-1/2" in Height. Equipped with 72" long product in feed conveyor, LDPE seal jaws and next generation side seal with product discharge conveyor. Control panel with A/B controller, has no product detection, perf and scrap removal wheels, seal bar trim, tempature controllers, drive speed dial with start, stop, jog and e-stop. Film specs: Film specifications: up to 39" wide single wound film on 3" OD core; to 14" in diameter, with pull out film carriage. Mounted on (4) leg base frame with interlock safety guarding.
Shrink tunnel: Aperture: 24" in Width; 14" in Height; tunnel 72" in Length. Equipped with 120" long x 22" wide conveyor, top mounted blower with variable speed and temperature controls. Mounted on height adjustable (4) leg base frame.
OAD: 251" L x 63" W X 61" HGet a Free Quote Call: 630-629-9900
- Manufacturer: Extreme Packaging Machinery
- Model Number: SAL-18LS / X118
- Frain Number: 5H4741
Extreme Packaging Models SAL-18LS / X118, automatic, continous, flow thru shrink wrapper and heat tunnel rated from 0 to 180 feet per minute with number of product – depending on materials and application. Package size range: Infinite in length; to 18" in width; to 8" in Height. Equipped with 50" long dual chain lugged in feed conveyor with product pushers currently set on 24" centers, thru the forming plow and 18" long x 14" wide vacuum film hold down conveyor to 43" long x 14" wide product thru sealing bars and discharge conveyor belt with 20" wide hot knife cross seal jaws and bottom lap seal. 44" long film rolls with pin perf wheels and has maximum 25" centerfold film width and is capable of running polyolefin, polyethylene and pvc films. Control panel has swing arm controller with operator interface dispay and e-stop.
Shrink heat tunnel aperture: 12" in Height; 21" in Width; 73" in Length. Equipped with 18" wide x 73" long steel mesh conveyor belt. and 32" long x 4" wide product side chamber viewing window. Control panel has conveyor speed and air velocity control dials with conveyor and tunnel cool down on / off switches and e-stop. 78" long x 19" wide slip torque product accumulation conveyor. All mounted on heavy duty base frames.
OAD: 120" L x 50" W x 68" H Sealer
84" L x 42" W x 62" H Tunnel
78" L x 30" W x 36" H Conveyor
- Manufacturer: Sani-Matic
- Model Number: 1 TANK CIP
- Frain Number: R30151
Sani-Matic single tank, stainless steel, sanitary CIP system. Equipped with (1) 32" OD x 47" straight wall, 200 gallon stainless steel single wall product holding tank, has flat top with 18" OD manway and flip-up, lock down cover with (6) 3-1/2" OD, (1) 2-1/2" OD top sanitary ports, slant bottom with 3" OD sanitary side bottom discharge. Enerquip 4" ID x 36" Long all stainless steel, tube in shell heat exchanger rated up to 12 gallons per minute has top 6" OD / 3-1/2" ID flanged top product port with (4) 3/4" bolt holes on 4" centers and (1) 1-1/2" ID threaded media port, flanged front cover has (8) 1/2" bolt holes on 4" centers with (2) 2" ID sanitary tube in / outlets, Fristam stainless steel centrifugal pump with stainless steel 10 Hp motor drive. System has 2" OD stainless steel sanitary piping and fittings, flow meter with read-out, inline filter, air and check valves, temperture sensors and gauges. Remote control panel has A/B controller with flow rate and level controls, conductivity meter, solenoids and breakers. Mounted on 108" long x 48" wide (6) leg stainless steel platform.
Tube and Shell Heat Exchanger
MAWP: 150 PSI @ 375°F
MDMT: -20°F @ 150 PSI
OAD: 108" L x 48" W x 80" HGet a Free Quote Call: 630-629-9900
- Manufacturer: Arpac
- Model Number: 105-24
- Frain Number: 5H4471
Arpac, Model 105-24 Inline, intermittent motion, shrink bundler and tunnel. Rated from 5 to 20 bundles per minute – depending on materials and application. Equipped with 22" wide x 70" long in feed conveyor, 24" wide film rolls, 25" wide seal jaws with 13" vertical travel, 22" wide x 22" long Intralox transfer conveyor to shrink tunnel. Single zone shrink tunnel has 24” wide x 15" high total aperture x 60" long with 90" long x 24" wide Intralox product conveyor. Control panel has touch pad controls and readout, start / stop / e-stop / manual seal push button controls and digital temperature controls for seal bar and tunnel. Mounted on heavy duty base frame.
OAD: 190"L x 63"W x 84"HGet a Free Quote Call: 630-629-9900
- Manufacturer: Poly Pak
- Model Number: CFH16-32VL
- Frain Number: 5D8581
****PART OF COMPLETE LINE****
Automatic, S/S, continuous motion, total closure, vertical seal bar, shrink wrapper with orienter capable of 20 to 70 cycles per minute – depending on materials and application. Bundles size range: up to 12"W x up to 9"H. Features label orienter for 3×1 configuration, in feed with 1 3/4"H lugs on 20" centers, 4 1/2"W vacuum in feed belt (after wrap / before seal), 19 1/2"W x 13 3/4"H tunnel aperture, 58"L tunnel, 122"L x 14"W tunnel bar conveyor. Equipped with Allen Bradley PLC, E-stop, low film indicator light and barrier guarding with electrical interlock. Mounted on S/S frame with casters and set down feet. Currently set up with 4 1/2"W x 7 1/2"H box former.
OAD: Shrink: 207"L x 56"W x 80"H
Infeed/Orienter: 172"L x 48"W x 74"H
- Manufacturer: Arpac
- Model Number: 105TW28
- Frain Number: R29143
Arpac, Model 105TW28, Inline, shrink bundler. Rated from 1 to 30 bundles per minute – depending on materials, application and machine configuration. Equipped with 20" wide x 70" long slip torque in feed conveyor, 28" wide hot knife seal jaws with 12" vertical travel and 25¼" wide x 12" long transfer conveyor to shrink tunnel. 70" long shrink tunnel has 29” wide x 17" high total aperture, 110" long x 29" wide product conveyor and cooling fan on discharge. Control panel with AB controller, touch pad controls with readout, start / stop / e-stop / manual seal push button controls and digital temperature controls for seal bar and tunnel. Mounted on heavy duty base frame.
OAD: 202"L x 72"W x 90"HGet a Free Quote Call: 630-629-9900
- Manufacturer: Arpac
- Model Number: 10828TW
- Frain Number: R29142
Arpac, Model 108-28 TW, right angle shrink bundler. Rated from 10 to 30 bundles per minute – depending on materials, application and machine configuration. Equipped with 10" wide x 40" long in feed conveyor, film hoist, 90° product pusher, 29" wide hot knife seal jaws with 10" vertical travel and bundle hold down tamp. 83" long single zone shrink tunnel has 30” wide x 16" high total aperture, 128" long x 29" wide product conveyor and cooling fan on discharge. Control panel with AB controller, touch pad controls with readout, start / stop / e-stop / manual seal push button controls and digital temperature controls for seal bar and tunnel. Mounted on heavy duty base frame.
OAD: 223"L x 68"W x 121"HGet a Free Quote Call: 630-629-9900
- Manufacturer: Arpac
- Model Number: 55GI20CX
- Frain Number: R28041
Arpac, Model 55GI-20CX, Inline, continuous motion, shrink bundler. Rated from 10 to 55 bundles per minute – depending on materials, application and machine configuration. Equipped with 13" wide x 36" long in feed conveyor, (2) 21" wide film roll holders with film splicing stations, film hoist, 21" wide walking beam seal jaws with 11" vertical travel and 13" wide x 26" long transfer conveyor to shrink tunnel. 70" long single zone shrink tunnel has 21” wide x 16" high total aperture, 90" long x 20½" wide product conveyor, cooling fan and roller side compression on discharge. Control panel with AB controller, touch pad controls with readout, start / stop / e-stop / manual seal push button controls and digital temperature controls for seal bar and tunnel. Mounted on heavy duty base frame.
OAD: 167"L x 60"W x 105"HGet a Free Quote Call: 630-629-9900
- Manufacturer: Arpac
- Model Number: BPTW5301
- Frain Number: R27010
Arpac Model BPTW5301, automatic, continuous motion, servo controlled, bottom overlap, registered print tray shrink wrapper and tunnel rated from 10 to 70 packages per minute – depending on materials and application Product size range: 5" to 12" in Length; 6" to 20" in Width; 3" to 12" in Height. Equipped with 70" long x 22" wide in feed plastic interlock conveyor, to 24" long x 22" wide acceleration conveyor to product film 24" long x 22" wide overlap wrap conveyor with 24" long x 22" wide discharge conveyor to tunnel, side dual film racks with splicer, film dancer and tensioner rollers, film registration. film up to 24" maximum in width; 20" in maximum OD with 3" OD core.
Shrink tunnel has 32" wide x 21" high apeture, x 132" long heating chamber with 180" long x 26" wide conveyor, 3 heating zones with independent heat controls and air recirculating fans with 2 cooling fans below to cool conveyor belt and top discharge cooling section. Control panel has A/B PLC controller, with touch pad controls with display, flight bar, cycle, power on, stop ande-stop push button controls with product jog, run and regitration control switches, safety guarding and statis light bar. Mounted on heavy duty base frame.
OAD: 336" L x 100" W x 80" HGet a Free Quote Call: 630-629-9900
- Manufacturer: Skinetta
- Model Number: ASK600
- Frain Number: 5C9542
Automatic dual lane stretch/shrink film bundler capable of speeds from 10 to 30 cycles per minute (60 Bundles per min) – depending on materials and application. Capable of a product size range (length) 75mm – 315mm (width) 75mm -315mm height up to 11". Equipped with 6"W x 96"L right angle dual infeed conveyor. Unitary frame with integrated 12"H x 26"W shrink tunnel w/24"W x 80"L discharge conveyor. Unit has Allen Bradley plc. Accepts up to 680mm film and has a 440mm max pull stroke length. Last running in a pharmaceutical on bottles of childrens vitamins as well as fifth panel cartons of childrens vitamins.
OAD: 156" L x 52" W x 89" H (main body)
- Manufacturer: Shanklin
- Model Number: A26A
- Frain Number: R18021
Shanklin Model A26A, automatic, flow thru, shrink wrapper rated from 5 to 25 packages per minute – depending on materials, application and machine configuration. Seal area: up to 20" in Length; up to 16" in Width; up to 5" in Height. Equipped with film carrage, automatic film power feed, perforator wheels, scrap pull through and extending nose discharge conveyor. Accepts center folded film widths up to 24". Control panel has constant and impulse heat, dwell, product placement and in feed conveyor speed control dials with main power and seal heat, scrap on / off switches with seal and reset and e-stop push buttom controls. Mounted on (4) leg frame with casters.
OAD: 66" L x 54" W x 60" H.Get a Free Quote Call: 630-629-9900