Shrink Machines

Used Shrink Equipment

Looking for a used shrink wrap machine for sale?  You’ve come to the right place.

Shrink wrapping equipment or shrink packaging equipment is designed to package products or packages within a film that is subsequently heat shrunk around the product or package to create a very tight seal with the package.

Shrink wrapping is sometimes used as the primary packaging. Some individual foods, soaps and other products may be wrapped directly. More commonly shrink wrapping is used as a secondary or tertiary packaging. An example of secondary use is shrink wrapped six-packs of beverage cans or 24 pack bundles of water.

Wrapping is also commonly used as a tertiary packaging such as overwrapping an individual carton or bundle of cartons. In the past, appearance of the tertiary packaging has not been considered critical important as the customer never saw it. The rise of club stores like Costco and Sam’s Club has changed this. The 6 pack of canned corn is now the unit of sale in these stores and appearance has become critical to branding. Previously translucent grey film was fine since nobody outside of the stockroom was likely to see it. Now, glossy film with registered graphics is needed to catch the customer’s eye using bullseye or end seal wrapping. This affects the choices of machinery that can be used.

Download the complete Shrink Wrapping Whitepaper to continue learning about different types of wrappers.

One important consideration when selecting the proper a shrink packaging machine is the type of shrink package that is desired around the product. L-bar sealer shrink packaging equipment forms a film seal around a product that has three side seams, one the front of the package and one on each side of the package. Flow thru shrink packaging equipment forms a shrink film package from a single roll of shrink film that has an overlapped shrink film seal underneath the package and a cross seal on the front and back sides of the package. Shrink bundler packaging equipment forms a shrink film package around the product from two rolls of shrink film which has cross seam across the front and back sides of the package and openings in the film package on the left and right sides of the package.

Once a product has been wrapped in shrink film, the product passes through a heat shrink tunnel. The heat from the heat shrink tunnel causes the film to shrink around the product forming a tight package around the product.

Browse our used shrink wrap machines for sale or contact Frain today to discuss your project.

Contact Us

Shrink Equipment In Stock

Great Lakes Shrink Tunnels MP2040-60/C4

  • Manufacturer: Great Lakes
  • Model Number: MP2040-60/C4
  • Frain Number: 5E4583

Automatic, shrink, and cooling tunnel has a 40" W x 20" H apeture x 60" L heat chamber, and a 40" W x 20" H x 36" L cooling chamber, a 132" L x 39" W nylon mesh product conveyor belt running thru both with 36" infeed and discharge height, and control panel.

OAD: 137" L x 60" W 79" H

Get a Free Quote Call: 630-629-9900

Shanklin Shrink Flow Thru F1

  • Manufacturer: Shanklin
  • Model Number: F1
  • Frain Number: 5E4152

Automatic, continuous motion, flow thru shrink wrapper capable of speeds from 20 to 50 ppm or 60 linear feet per min depending on size, and shape of product. Package size range of: 6" – 48" L x 2" – 16" W x 1/8" – 6" H, has side film unwind, with a max film width of 22" folded, and 44" flat, with (2) 17" L x 13" W neopreme belt product feed conveyors belts, 18" L hot knife seal jaw, and 12" L side seal. A/B PLC, with touch pad control panel, (2) individual 77" L x 16" W canvas belt infeed conveyors, and a 36"L x 12" W neopreme belt discharge conveyor with 36" infeed / discharge heights, and vari-speed controllers.

OAD: 330" L x 48" W x 50" H

Get a Free Quote Call: 630-629-9900

Edl Shrink Bundler 400

  • Manufacturer: Edl
  • Model Number: 400
  • Frain Number: 5B3681

Edl model 400, automatic, right angle, shrink bundler rated from 5 to 20 bundles per minute – depending on materials, application and machine configuration. Package size: up to 6" in Length; up to 13" in width; up to 5" in Heights. Equipped with 7-1/2" wide infeed conveyor, product collation area, ram product advance, cover plate traversing seal bar, 16" wide cross seal, top hold down, safety guarding and PLC.
Shrink tunnel aperture: 16" W x 11" H; 30" L chamber. 60" L x 15" W product conveyor.

OAD: 142" L x 60" W x 69" H Machine
19" L x 33" W x56" H Control Panel

Get a Free Quote Call: 630-629-9900

Doboy Shrink Flow Thru LINIUM SK305

  • Manufacturer: Doboy
  • Model Number: LINIUM SK305
  • Frain Number: 5E3900

Flow-through, horizontal shrink wrapper rated from 40 to 110 packages per minute – depending on materials and application. Package range: 6.7" to 22.25" in Length; 3.5 to 12" in Width; up to 3.9" in Height. Equipped with a 80" lugged infeed, high product sensor, no product / no package, dual film mandrels, splice station, 4 wheel perforation, static eliminator bar, bottom static seal, vacuum transfer conveyor, (one up) 13" hot knife cross seal and panel view controls. Film: up to 24′ web width. Mounted on adjustable screw legs and casters.

OAD: 176"L x 54"W x 78"H

Coder available at additional cost.

Get a Free Quote Call: 630-629-9900

Shanklin Shrink Flow Thru F1SS

  • Manufacturer: Shanklin
  • Model Number: F1SS
  • Frain Number: 5G5510

Shanklin Model F-1, automatic, continuous motion inline flow thru shrink wrapper rated from 0 to 60 linear feet per minute with number of product – depending on materials and application. Stainless steel construction. Package size range: 6" to 48" in Length; 2" to 16" in Width; 1/8" to 6" in Height. Maximum film size: 22" folded. Equipped with side film unwind, folded film roll, hole punch, dual wire side seal, and 18" wide hot knife cut-off, dual 17" long x 13" wide in feed conveyor and 21" long x 10" wide discharge conveyor. Control panel has A/B PLC with touch pad controller and digital readout. Mounted on base frame with leveling legs.

Get a Free Quote Call: 630-629-9900

Shanklin Shrink Auto L Bar A27A

  • Manufacturer: Shanklin
  • Model Number: A27A
  • Frain Number: R21421

Shanklin A27A automatic L-bar sealer and shrink tunnel rated from 5 to 25 packages per minute – depending upon materials, application and machine configuration. Size range: 3" to 32" in Length; 3" to 20" in width; to 8" in height. Equipped with 21" wide x 33" long hot knife seal area and has pneumatic hole punch, scrap remover and safety guarding. Control panel has A/B controller and 40" long x 19" wide discharge conveyor and uses center fold film. Mounted on (4) leg frame with casters.

OAD: 84"L x 74"W x 50"H

T7H Shrink tunnel with variable speed and temperature controls. Temperatures: 50 to 500°F. Conveyor speeds 25′ to 120′ per minute. Chamber: 42" in Length; 22” in Width; 12" in Height. Equipped with a 76” long by 15” wide stainless steel mesh conveyor. Mounted on (4) leg frame with casters.

OAD: 76"L x 38"W x 72"H

Get a Free Quote Call: 630-629-9900

Shanklin Shrink Auto L Bar A26A

  • Manufacturer: Shanklin
  • Model Number: A26A
  • Frain Number: 5H5191

Shanklin Model A26A / T6XL, automatic, L- bar sealer and shrink tunnel rated from 5 to 35 packages per minute – depending on materials and application. System consists of Shanklin Model A26A automatic L-bar sealer equipped with 32" long x 14" wide neophrene product in feed conveyor belt, hot wire L- bar seal area with product size up to 20" in Length; 16" in Width; 5" in Height and 27" long x 14" wide neophrene thru L-bar conveyor, 30" long film rolls with automatic power film unwind and perforator wheels, scrap removal and accepts center folded film widths up to 24". Control panel has front and cross heat seal controllers, constant, impulse heat, dwell, product placement and in feed conveyor speed control dials with main power, heat seal, scrap and automatic / manual on / off switches with seal, reset and e-stop push button controls.

Shanklin, Model T-6XL, single zone shrink tunnel. Equipped with 18" Wide x 7" High total apeture x 30" Long heat chamber with 58" long x 12" wide steel mesh product conveyor belt with single top mounted 3/4 Hp blower. Control panel has tempature controller up to 500° F, variable speed conveyor dial, main machine, heater and conveyor on / off switches. Both mounted on (4) adjustable leg base frames with casters.

OAD: OAD: 64" L x 60" W x 58" H Wrapper
58" L x 36" W x 69" H Tunnel
20" L x 20" W x 18" H Scrap Removal

Get a Free Quote Call: 630-629-9900

Arpac Shrink Flow Thru TS33CF / MPD163090

  • Manufacturer: Arpac
  • Model Number: TS33CF / MPD163090
  • Frain Number: 5H5010

Arpac, Model TS33CF, continuous motion, horizontal flow thru shrink wrapper and tunnel . *Package size range: 4" to 48" in Length; 8" to 26" in Width; 1/8" to 12" in Height. Equipped with 240" long lugged in feed conveyor currently set on 30" centers with 3½" high lugs, 25½" wide x 53" long former conveyor, 19½" wide x 32" long side seal conveyor, 25" wide x 30" long seal conveyor, 33" pre folded side film unwind, perf wheel, scrap removal, side seal and 28" wide hot knife cross seal with 12" vertical travel. A/B controller with touch screen HMI. Arpac, Model MPD163090, two zone shrink tunnel with 16" high x 30" wide aperture, 90" long two zone tunnel, 28" wide x 106" long conveyor and cooling fan.
*Package maximums cannot occur together.
Rated from 0 to 80 linear feet per minute with number of product – depending on materials, application and machine configuration.
OAD: 466"L x 72"W x 80"H

Get a Free Quote Call: 630-629-9900

Arpac Shrink Tunnels T54-40-120

  • Manufacturer: Arpac
  • Model Number: T54-40-120
  • Frain Number: 5H5020

Arpac Model T54-40-120, high speed, (2) zone shrink tunnel with number of product per minute – depending on materials and application. Tunnel has total aperature of 40" in Height; 54" in Width. Chamber dimensions of 120" in Length. Equipped with 150" long x 45" wide nylon fiberglass flexlink product belt conveyor with 38" in feed and discharge heights. Top mounted dual blowers independently controlled to accommodate high speed shrink wrapping systems. Control panel has heater 1 and 2 controls, power on, cycle start, stop, cycle, reset e-stop buttons. Mounted on heavy duty frame with (4) height adjustable legs.

OAD: 150" L x 100" W x 94" H

Get a Free Quote Call: 630-629-9900

Shanklin Shrink Auto L Bar A27A

  • Manufacturer: Shanklin
  • Model Number: A27A
  • Frain Number: R30490

Shanklin, Model A27A, automatic, stainless steel, L-bar sealer and shrink tunnel rated from 10 to 25 packages per minute – depending on materials and application. Package size range: 2¾" to 33" in length; to 21" in width; to 8" in Height. Equipped with 36" long x 17½" wide in feed conveyor and 40" long x 19½" wide product thru seal area and discharge conveyor. side mounted film rollers with maximum center fold film of 26" in width and powered film rollers with perf pin wheels. Film former and 28" long x 19" wide L-bar with hot knife seal jaws. Control panel has A/B controller with touch pad controls and read out, A/B vari-speed controller, with start, stop, manual, reset, front and cross seal heat controls, conveyor speed dial, scrap removal controls with e-stops. Mounted on stainless steel frame with flip-up safety guarding and locking casters
Shanklin, Model T-7XL, stainless steel, automatic single zone shrink tunnel with number of product per minute – depending on materials and application Aperture: 8" in Height; 22" in Width. Tunnel: 42" in Length. Equipped with 15" wide x 58" long steel mesh belt, top mounted blower motor and bottom conveyor heater. Control panel has temperature controller with range of 50° F to 500° F, on / off heat switch and conveyor speed control dial. Mounted on (4) leg base frame with casters.

Film Re-wind available at additional cost.

OAD: 84" L x 60" W x 53" H L-Bar Sealer
60" L x 43" W x 70" H Tunnel

Get a Free Quote Call: 630-629-9900

Arpac Shrink Flow Thru TS37/XT18

  • Manufacturer: Arpac
  • Model Number: TS37/XT18
  • Frain Number: R30180

Arpac Model TS37 and XT18, horizontal continuous motion, side seal shrink wrapper and tunnel rated from 0 to 90 linear feet and 0 to 80 packages per minute – depending on materials, application and product stability. Product size range: 3-1/2" to 60" in Length; 2" to 16" in Width; 1/4" to 7-1/2" in Height. Equipped with 72" long product in feed conveyor, LDPE seal jaws and next generation side seal with product discharge conveyor. Control panel with A/B controller, has no product detection, perf and scrap removal wheels, seal bar trim, tempature controllers, drive speed dial with start, stop, jog and e-stop. Film specs: Film specifications: up to 39" wide centerfold, 3" OD core; up to 14" in diameter, with pull out film carriage. Mounted on (4) leg base frame with interlock safety guarding.
Shrink tunnel: Aperture: 24" in Width; 14" in Height; tunnel 72" in Length. Equipped with 120" long x 22" wide conveyor, top mounted blower with variable speed and temperature controls. Mounted on height adjustable (4) leg base frame.

OAD: 251" L x 63" W x 61" H

Get a Free Quote Call: 630-629-9900

Arpac Shrink Flow Thru HC37

  • Manufacturer: Arpac
  • Model Number: HC37
  • Frain Number: R30400

Arpac Model HC37, horizontal, continuous motion, servo driven, flow thru shrink wrapper and bottom lap sealer rated from 0 to 90 linear feet and 0 to 80 packages per minute – depending on materials, application and product stability. Product size range: 3-1/2" to per application in Length; up to 16" in Width; up to 7-1/2" horizontal jaws and up to 12" vertical jaws in Height. Equipped with 245" long Lugged servo driven in feed conveyor with 1/2" wide x 1" high lugs set on 16" centers with adjustable guide rails into the flow wrapper forming plow, with 19" long 9-1/2" wide vacuum conveyor pulling film and product to 32" long x 9-1/2" wide neophreme belt conveyor thru the 17" wide interchangeable horizontal or vertical cross seal jaws and overlapping bottom film static lap seal to the discharge. Centerfold film maximum width up to 37" and film roll maximum OD up to 14" and has 38" long servo driven film rolls with perf wheels. Control panel has A/B CPU and A/B panelview controller with seal bar and lap seal temperature controllers, manual / jog, cycle start and on / off with e-start, Mounted on (4) leg base frame with interlock safety door guarding.

OAD: 84" L x 64" W x 78" H Flow Thru Sealer
245" L x 36" W x 36" H In Feed Conveyor

Get a Free Quote Call: 630-629-9900