Heat Exchanger Machines

Alfa Laval Heat Exch Scrape Surface 6X9

• Manufacturer: Alfa Laval
• Model Number: 6X9
• Frain Number: 5H3310

Alfa Laval, Model 6 x 9 Contherm, Vertical, (3) concentered, scrape surface heat exchanger system has (3) 72" x 9" stainless steel tubes, with amount of product per hour each tube – depending on materials and application. Equipped with 9 ft² of heat transfer area each tube, working temperature range of -30 to +300 Deg F, with top mounted motor drives and 2-1/2"OD / 1-3/4" ID product inlet and outlet ports each cylinder. Main top mounted control panel with individual controllers for each tube has motor, speed and temperature start, stop controls with readout and CIP system controller with start, stop and e-stop controls. Each mounted on individual pedistal style stainless steel stands. Product enters the cylinder through the lower port and flows upwards through cylinder simultaneously and media travels in a countercurrent flow through the narrow channel and rotating blades remove product from cylinder wall to ensure uniform heat transfer to the product and is ideal for food products as well as other applications.

Product Chamber: MAWP: 300 psi @ 300°F
Media Chamber: MAWP: 250 psi @ 300°,
MDMT: -30°F @ 100 psi

OAD: 80" L x 72" W x 209" H

Chester Jensen Heat Exch Plate 100 GPM HTST

• Manufacturer: Chester Jensen
• Model Number: 100 GPM HTST
• Frain Number: 5G7986

Complete, 25 to 100 gallon per minute, HTST pasteurizing system. Equipped with a Chester Jensen, Model M466F, (2) zone (233) plate heat exchanger with 1085 ft² heat exchange surface area; (43) first zone, (190) second zone. Stainless steel 50 gallon holding tube. Schlueter, 150 gallon, stainless steel tank with level detection. Chem Tek, 226 gallon, stainless steel tank with bottom side mounted prop agitation. Waukesha, Model 130, positive displacement pump powered by a 10 hp drive. (2) Tri-Clover centrifugal pumps powered by 5 Hp drives and (1) centrifugal pump powered by 10 Hp drive. Neptune Meter, valves and controls panel with an AB PLC, AVG EZ series touch panel, Anderson chart recorder and push button system power on with E-stop.

Tetra Pak Hoyer Heat Exch Tube in Tube SPIRAFLOW

• Manufacturer: Tetra Pak Hoyer
• Model Number: SPIRAFLOW
• Frain Number: R28946

Tetra Pak, Model Spriaflow, tube in shell heat exchange with a 15 liter product capacity. Equipped with (29) 0.4 liter tubes with 1.8 liter shells, 1½" OD / 1" ID seated bevel style inlet ports and (2) 1" OD / ½" ID seated bevel style product discharge ports. Mounted on a heavy duty stainless steel base frame with panel guarding.

MAWP: 290 PSI @ 320°F (shell)
MAWP: 725 PSI @ 320°F (tube)

OAD: 235"L x 38"W x 32"H

APV Heat Exch Plate R57MOD1

• Manufacturer: APV
• Model Number: R57MOD1
• Frain Number: 5G9666

APV, Model R57 MOD1, stainless steel, plate and frame heat exchanger. Approx 600 total ft² heat transfer area. Equipped with (89) plates 61" in Length; 16½" in Width; in (1) zone. (2) 3" OD / 2¾" ID Tri-clamp and (2) 9"OD / 4"ID 8-bolt flange style transfer ports. Mounted on a painted base frame with locking casters.

OAD: 72"L x 30"W x 86"H

Alfa Laval Heat Exch Plate M10

• Manufacturer: Alfa Laval
• Model Number: M10
• Frain Number: 5H1177

Alfa Laval, Model M10, stainless steel, plate and frame heat exchanger. Approx 350 total ft² heat transfer area with a flow rate of 1 to 45 gallons per minute – depending on materials, application and machine configuration. Equipped with (105) plates 35" in Length; 14" in Width; in (1) zone. (4) 4¾" OD / 3¾" ID Tri-clamp style transfer ports with a maximum working pressure of 87 psi and a maximum operating temperature of 230° F – depending on gasket material. Mounted on stainless steel base frame.

OAD: 55"L x 18"W x 39"H

Cemline Corp Heat Exch Shell & Tubes 1248ASP

• Manufacturer: Cemline Corp
• Model Number: 1248ASP
• Frain Number: 5H0978

Cemline, Model 1248A-SP, 89 ft² tube in shell heat exchanger. Equipped with (2) 2" NPT media inlet / outlets, pressure relief valve and (2) 4¾" OD / 4" ID Tri-clamp style product inlet / outlets. Mounted on (4) leg frame.

MAWP: 150 psi @ 375°F (Tubes)

OAD: 62"L x 20"W x 70"H

Votator Heat Exch Scrape Surface 936635

• Manufacturer: Votator
• Model Number: 936635
• Frain Number: 5G9931

Votator, A and B unit Shortening system components.
Upper unit:
Ammonia jacketed, 6 x 72 Votator 2 with a Chrome Nickel tube, 4.5" shaft with rotary joint, Celcon blades, una/Neoprene Elastomers, Carbon vs Chrome Oxide Seals, and a 20Hp 350RPM gear motor. Equipped with stainless steel frame, (1) 12" diameter x 70" long product chamber powered by a 20 Hp drive with (1) 2½" NPT and (1) 1½" NPT media ports and (1) 2½"OD / 2"ID I-line and (1) 2"OD / 1½"ID I-line jacket ports.

Product Chamber: MAWP: 600 psi @ 400°F
MDMT: -20°F @ 600 psi
Media Chamber: MAWP: 250 psi @ 400°F
MDMT: -20°F @ 250 psi

Lower unit:
Pin Mill 13" x 45.75" jacketed with 7.5hp, 127 rpm gearmotor. (1) 14" diameter x 45" long stainless steel frame powered by a 7½ Hp drive with (2) 2½"OD / 2"ID I-line product ports. gearmotor

Product Chamber: MAWP: 600 psi @ 100°F
MDMT: -20°F @ 600 psi

OAD: 120"L x 28"W x 63"H

APV Crepaco Heat Exch Scrape Surface HD

• Manufacturer: APV Crepaco
• Model Number: HD
• Frain Number: 5G9083

Crepaco, Model HD, stainless steel, continuous, double cylinder, scrape surface heat exchanger. Rated from 100 to 5,000 gallons of product per hour – depending on materials, application and machine configuration. Each cylinder is jacketed and rated to MAWP 150 Psi @ 350° F with 70" long x 6" ID product cylinder each,with (4) scraper blades, 9 ft² of heat transfer area, 2½"OD / 2"ID threaded product connections and 1" NPT media connections Both Cylinders powered by a common 15 Hp motor drive. Mounted on (6) leg heavy duty frame.

Nat’l Brd: 2775 / 2776
Tube S/N # 5676, 5679

OAD: 112" L x 38" W x 46" H

APV Crepaco Heat Exch Scrape Surface HD

• Manufacturer: APV Crepaco
• Model Number: HD
• Frain Number: 5G9082

Crepaco, Model HD, stainless steel, continuous, double cylinder, scrape surface heat exchanger. Rated from 100 to 5,000 gallons of product per hour – depending on materials, application and machine configuration. Each cylinder is steam jacketed and rated to MAWP 150 Psi @ 350° F with 70" long x 6" ID product cylinder each,with (4) scraper blades, 9 ft² of heat transfer area, 2½"OD / 2"ID threaded product connections and 1" NPT media connections Both Cylinders powered by a common 15 Hp motor drive. Mounted on (6) leg heavy duty frame.

Tube S/N # 6250, 6252

OAD: 112" L x 38" W x 46" H

Johnson Controls Inc Heat Exch Plate LZW400

• Manufacturer: Johnson Controls Inc
• Model Number: LZW400
• Frain Number: 5G8845

Frick, Model LZW-400, plate and frame heat exchanger. Approx 352 total ft² heat transfer area with a flow rate of 100 to 800 gallons per minute – depending on materials, application and machine configuration. Equipped with (65) plates 46" in Length; 17" in Width; in (1) zone. (4) 4" ID / flanged transfer ports.

Chamber 1:
MAWP: 150 PSI @ 150°F
MDMT: -20°F @ 150 PSI

Chamber 2:
MAWP: 250 PSI @ 150°F
MDMT: -20°F @ 250 PSI

Nat’l Brd: 13079

OAD: 46"L x 22"W x 57"H

APV / SPX Heat Transfer Heat Exch Plate SR310

• Manufacturer: APV / SPX Heat Transfer
• Model Number: SR310
• Frain Number: 5G8011

APV, Model SR310, stainless steel, plate and frame heat exchanger. Approx 765 total ft² heat transfer area with a flow rate of 10 to 100 gallons per minute – depending on materials, application and machine configuration. Equipped with (205) plates 43" in Length; 15" in Width; in (1) zone. (8) 3½" OD / 3" ID Tri-clamp style transfer ports with a maximum working pressure of 150 psi and a maximum operating temperature of 239° F – depending on gasket material. Mounted on stainless steel base frame.

OAD: 109"L x 27"W x 83"H

Alfa Laval Heat Exch Scrape Surface 6X9

• Manufacturer: Alfa Laval
• Model Number: 6X9
• Frain Number: 5G8002

Alfa Laval, Model Contherm 6 x 9, stainless steel vertical, scrape surface heat exchanger with lbs of product per hour – depending on materials and application. Equipped with vertical mounting post, hydraulic tube lift, 6" diameter x 72" long stainless steel product chamber (9 ft²) of heat transfer area, stainless steel scraper blades powered by a 7½ hp drive, (2) 2½" OD / 2"ID tri-clamp style sanitary product connections and (2) 2" NPT media connections.

Product Chamber: MAWP: 300 psi @ 300°F
Media Chamber: MAWP: 250 psi @ 300°F
MDMT: -30°F @ 100 psi

OAD: 42"L x 16"W x 138"H