Labeler Machines

New Jersey Labeler Glue Wrap MUSTANG

• Manufacturer: New Jersey
• Model Number: MUSTANG
• Frain Number: 5D7272

New Jersey Mustang fully automatic cold glue wrap labeler capable of 80 – 200 containers per minute for containers: 1 1/2" – 4" diameter, labels: 2 1/2" – 12" L by 1" – 5 1/2"H. Features a worm screw infeed, two wrap stations with 5" high wrap belts, a 132"L by 4 1/2"W delron table top conveyor, and a 15" L pre-cut label magazine with label pusher. Equipped with low label indicator, no container / no label, E-stops, and controls for drive motor (start/stop), vacuum motor, glue roll motor, and speed control. Mounted on a stainless steel frame with height adjustable legs.
Model 315LS1203

OAD: 132"L x 34"W x 40"H

Krones Labeler Glue Front & Back STARMATIC

• Manufacturer: Krones
• Model Number: STARMATIC
• Frain Number: 5D0599

Krones Starmatic fully automatic 16 station spot front cold glue labeler with a Garantomtic neck band applicator capable of speeds from 100 to 330 LPM. Has mounting and drive for a back labeling head to be added if required. Equipped with a Krones label check unwind stand. Container size range maximum 2" -5"diameter. Label size range of 2 1/8 – 7 1/8".

OAD: 14’6" x 7′ x 7′.

Nita Smart Labeling Systems Labeler Front/Back & Wrap XP200T

• Manufacturer: Nita Smart Labeling Systems
• Model Number: XP200T
• Frain Number: R38880

Nita, Model XP200T, front / back and wrap labeler with number of labels and containers per minute – depending on materials, application and machine configuration. Equipped with 144" long x 4" wide container conveyor with dual container metering and spacing belts, belt aligner, top hold down belt, servo driven pressure sensitive label applicators with label range of ½" to 6" high and 1" to unlimited in length and 14" long x 6" high wrap belt station. Swing arm touch screen HMI and status light bar. Mounted on stainless steel and anodized aluminum frame with leveling legs.

OAD: 148" L x 84" W x 80" H

Mateer Burt Labeler Glue Wrap 704S

• Manufacturer: Mateer Burt
• Model Number: 704S
• Frain Number: R37760

Mateer Burt, Model 704 Mark 6, automatic, roll thru, glue labeler. Rated from 10 to 600 containers per minute – depending on materials, application and machine configuration. Designed to apply full wrap glue labels to round shaped containers of metal, plastic and also glass (with proper change parts). Container size range: 1¾" to 7¼" In Diameter; 1(9/16)" to 10" in Height. Label size range: 4-5/8" to 24" in Length; 1½" to 9¼" in Width. Equipped with 32" long elevator infeed conveyor, dual container handling gripper v-belts, hydraulic label feed magazine, no container / no glue with hot glue pot and direct contact wheel applicators with Valco cold glue lap seal system. Control panel has start / stop push buttom controls with heat on / off switch and heat controller. Mounted on (4) leg frame with safety guarding, locking casters, leveling legs and statis light bar.

OAD: 166"L x 40"W x 56"H

Styrotech Labeler Sleever ST1550

• Manufacturer: Styrotech
• Model Number: ST1550
• Frain Number: 5J1480

Styrotech, Model ST1550, Automatic, stretch sleever rated from 10 to 30 containers per minute – depending on materials and application. Capable of handling a wide range of container types, shapes and sizes. Container size range: 2¼" to 9½" OD x up to 6½" Wide x 13½" High and film layflat size range 3" to 15" all with proper change parts. Film type and specs: Polyethlene, 2.0 to 3.0 ml with 10% stretch and no container / no label sensor. Control panel has A/B controller with 7" touch screen HMI and e-stop. Mounted on heavy duty frame with interlocking safety guarding and 4½" wide x 120" long delrin conveyor.

OAD: 62" L x 48" W x 72" H

Krones Labeler P/S Front & Back AUTOCOL 389

• Manufacturer: Krones
• Model Number: AUTOCOL 389
• Frain Number: 5D0443

Krones Autocol 389 fully automatic pressure sensitive front and back labeler 50 to 350 cpm. Label size range: 1-6" in height; 1 – 10" in length. Equipped with 3-1/4" wide by 16′ long conveyor, worm screw in-feed, top hold down and dual side compression stations. Oversize label spools 16" diameter with a 3" core. All s/s construction.

OAD: 16′ x 7′ x 5′

Tronics Labeler P/S Front & Back 3TDSC 31 CDE

• Manufacturer: Tronics
• Model Number: 3TDSC 31 CDE
• Frain Number: 5J2173

Tronics Labeler, Model 3TDSC 31 CDE,front/back wrap, pressure sensitive labeler with number of product per minute – depending on materials and application.Equipped with 120" long x 7½" wide plastic Delrin product in feed conveyor, left and right label heads, and 9½" high peel plates on both sides. Wrap conveyor, 14" long x 3½" high, 60" long x 1" wide Overhead conveyor. Mounted on stainless steel frame with a touch pad controller.

OAD 126" L x 62" W x 64" H

P E USA Inc Labeler P/S Front & Back MODULAR FIX M

• Manufacturer: P E USA Inc
• Model Number: MODULAR FIX M
• Frain Number: 5J1910

PE USA, Model Modular Fix M 770-16-5P-0-4, four station, pressure sensative, rotary labeler. Rated up to 250 containers per minutre depending on materials, application and machine configuration. Label head spead: up to 90m/min. Reel size: up to 395mm diameter x 200mm high. Label size from 15mm to 480mm long. Equipped with a 3¼" wide conveyor through labeler, dual worm screw into star wheel indexing, 16 head rotary table set on 6" centers, (4) M90 DX 200 label heads and star wheel discharge. Control panel has PLC with a touch screen HMI.

OAD: 208"L x 114"W x 94"H

Axon Labeler Sleever EZ300 / THERMOFLOW

• Manufacturer: Axon
• Model Number: EZ300 / THERMOFLOW
• Frain Number: R38500

Axon, Model EZ-300, Automatic, tamper evident shrink neck bander or sleeve label applicator with number of sleeves or neck bands per minute – depending on materials and application. Layflat: 80mm to 300mm, Film thickness: 50 to 70 microns. Maximum container Diameter: 7.36". Equipped with vertical and horizontal perforation, film cut off knife and film registration. Film specifications: up to 15" diameter roll on 3" core. Control panel has PLC Controller with touch pad controls and HMI display. Mounted on a height adjustable stainless steel frame.

Axon, Model Thermoflow, Stainless steel, shrink tunnel capable of handling round, square, oval and other irregularly shaped container. Container size range 1" to 6" diameter x 2" to 12" tall. Equipped with 30 Kw steam generator, 6½: wide x 13" high aperture x 36" long tunnel, with (3) sets of steam nozzles and 3¼" wide 217" long conveyor. Mounted on stainless steel frame.

OAD: 217" L x 86" W x 92" H

Nita Smart Labeling Systems Labeler P/S Spot SSK

• Manufacturer: Nita Smart Labeling Systems
• Model Number: SSK
• Frain Number: 5H8481

Nita Model SSK "C" Shaped (top, leading edge and bottom) pressure sensitive labeler rated from 0 to 1570" per minute with number of containers – depending on materials, application and machine configuration. Stainless steel construction. Container size range: up to 9" in Width; up to 10" in Height. Label size range: 1/2" to 6" in Width; 1/2" to 12" in Length. Accuracies: +/- 1/32". Equipped with dual 16" long side belt product infeed conveyors, Dual 56" long x 1½" wide bottom conveyors, adjustable guide rails, pressure sensitive wipe on label applicator and photo eye. Label specifications: 12" OD on 3" core. Servo drive and touch screen HMI. Mounted on (4) leg frame with casters and leveling legs.

OAD: 70"L x 58"W x 84"H

Axon Labeler Sleever EZ300

• Manufacturer: Axon
• Model Number: EZ300
• Frain Number: R37580

Axon Model EZ-300 and EZ-48, Automatic, tamper evident shrink neck bander or sleeve label applicator and shrink tunnel with number of sleeves or neck bands per minute – depending on materials and application. Layflat: 80mm to 300mm. Maximum container Diameter: 7.36". Film thickness: 40 to 70 microns. Equipped with vertical and horizontal perforation, knife film cut off, registration and PLC Controller with touch pad controls with HMI display. Mounted a height adjustable stainless steel frame. Film specifications: up to 15" diameter roll on 3" core.
Axon Model EZ-48, Stainless steel over conveyor, convection air, neck band shrink tunnel. Total Aperture: 10" in Height; 10" in Width. Tunnel: 48" in Length. Temperature range: up to 130° F. Equipped with recirculating blower, digital temperature controller and system mounted on height adjustable frame with locking casters. System mounted above 6" wide x 174" long stainless steel tabel top belt conveyor with spacing wheel and variable speed control.

OAD: 180"L x 55"W x 86"H

American Film & Machinery Labeler Sleever LX100 / HT1

• Manufacturer: American Film & Machinery
• Model Number: LX100 / HT1
• Frain Number: R31140

AFM Model LX-100 VD high speed, shrink sleever / neck bander with heat shrink tunnel rated from 40 to 100 containers per minute – depending on materials and application. Sleever has layflat sleeve size range of: 40mm (1.6") to 170mm (6.8") wide; Film Thickness .034mm to 0.07mm with cut length of 40mm (1.6") to 200mm (8") and is capable of running most types of film and can handle both oval and round containers made of plastic, glass and metal. Equipped with single head bullet style mandrel, single blade centrifical cutting mechanism, perf wheel, film registration, label brush down device single roll unwind and tention controller, powered film unwind with single film reel and low film indicator light. Control panel has Panasonic / Delta controls, with SQ-53i TTO coder and mounting bracket operator interface, statis lite bar and interlocking safety guarding.

TRIpack Model HT-1, Dual over conveyor hot air shrink tunnels with 125mm (5") wide x 262.5mm (10.5") high aperature x 900mm (36") long shrink chamber. Independent and adjustable baffles for air flow direction. Control panel has heater on / off, temperature controller with digital read out and powered up / down controls with e-stop and is hand crank height adjustable to 44" high.
All mounted over 208" long x 4-1/2 wide stainless steel delran product belt conveyor with motor drive and e-stop. All have stands with casters and leveling legs.

OAD: 208" L x 40" W x 98" H