Horizontal Machines

Mepaco Mixer Paste Horizontal 170

• Manufacturer: Mepaco
• Model Number: 170
• Frain Number: R32964

Mepaco, Model 170, T304 stainless steel, 1/2 steam dimple jacketed, dual trough, therma blend cooker, rated to 5000 pounds of product of per batch with amounts per hour – depending on materials and application. Trough dimensions: 102" in Length; 27" in Width; 36" in Depth each trough and set on 27" centers. Equipped with pnuematic lift up top cover and safety grid, double overlapping non-scraping ribbons with steam injection agitaor shafts, powered by (2) 10 Hp motor drives, with safety shrouds, 1/2 dimple steam jacket with MAWP: 90psi @ 375 Deg F and MDMT -20 Deg F @ 90psi with (4) 1-1/2" jacket ports (2) each side and shroud safety guarding has dual pneumatic end gate flip up discharges with 40" ground clearance. Control panel has Allen Bradley PLC, controller with Allen Bradley PanelView touchscreen controls and push button e-stop. Mounted on heavy duty stainless steel frame with leveling legs.
ASME Coded and National Board # 2618

OAD: 144" L x 90" W x 89" H

Cornell Mixer Paste Horizontal D26

• Manufacturer: Cornell
• Model Number: D26
• Frain Number: 5H7170

Cornell, Model D26, "Versator", deaerator, rated from 5 to 125 gallons and 1000 to 3200 rpm per minute – depending on materials and application. Equipped with 26" OD product rotating disc, (2) 2" ID flanged side chamber product charge and discharge ports, (1) 2½"OD / 2"ID Tri-clamp top vacuum port, pressure gauge and 2" NPT bottom drain. Swing open bolt down door has 4" ID front sight port, 25 Hp (3) belt to motor main drive. Mounted on 66" long x 42" wide platform base.
Operation: Product flows thru film forming ring out and then over the surface of rotating disc where the dispersion and deaeration action occurs, used in food, cosmetic, pharmaceutical and chemical applications.

OAD: 66"L x 42"W x 65"H

Lodige Mixer Paste Horizontal KM5

• Manufacturer: Lodige
• Model Number: KM5
• Frain Number: 5H6978

Lodige, Model KM5, 0.14 ft³, stainless steel mixer. Chamber dimensions: 4¾" diameter x 14" long. Equipped with (28) plows on 2½" diameter shaft, flush mount sensor and 2½" OD / 2"ID triclamp charge and discharge with 36" ground clearance. Mounted on a 60" long x 30" wide stainless steel table.

OAD: 65"L x 30"W x 52"H

Votator Mixer Paste Horizontal CR6

• Manufacturer: Votator
• Model Number: CR6
• Frain Number: 5G9699

Votator, Model CR-6, stainless steel jacketed paste mixer rated up to 65 cubic inches volume with gallons per minute – depending on materials, application and machine configuration. Continuous mixing, blending, dispersing and whipping. Equipped with 5½" OD rotor, 1½" OD / 1" ID seated bevel style inlet and 1½" OD / 1" ID seated bevel discharge with 21" ground clearance. Powered by 5 Hp motor drive with variable speed gearbox.

OAD: 40"L x 20"W x 28"H

Cornell Mixer Paste Horizontal D16

• Manufacturer: Cornell
• Model Number: D16
• Frain Number: R32490

Cornell, Model D16, "Versator" with mechanical drive. Rated from 1 to 20 gallons of product per minute – depending on materials and application. Polished sanitary 316 stainless steel contact parts. Equipped with 16" ID product rotating disc, with (2) 2" OD / 1½" ID Tri-Clamp side chamber in feed and discharge product ports, (1) 2½" OD / 2" ID top vacuum port, pressure gauge and 2"OD / 1½"ID Tri-Clamp bottom drain. Swing open clamp down door has 4" OD sight port and 7½ Hp motor drive with variable speed gearbox for an output of 1313 to 3940 rpm.

Operation: Product flows thru film forming ring and then over the surface of rotating disc where the dispersion, deaeration or defoaming action occurs and removal of entrapped air, foam, or gas from liquids under high vacuum.

OAD: 58"L x 26"W x 40"H

Peerless Mixer Paste Horizontal HS24FD

• Manufacturer: Peerless
• Model Number: HS24FD
• Frain Number: R31573

Peerless Model HS24FD, High speed, (3) roll bar dough mixer rated up to 2400 lbs or 1090 kgs of product per batch with total pounds of product per hour – depending on materials and application. Designed to BISSC standards with stainless steel exterior, bowl sheet, bowl ends, triple-roller bar, and jacketed for glycol with a maximum of 235 psi, the agitators and canopy are all stainless steel for sanitation purposes. Equipped with tilt style mixing bowl and has internal dimensions of: 56" in Length; 52" in Width; 54" in Depth. (3) 46" long x 3-1/2" OD Outer and (3) 46" long 2" OD solid inner stainless steel fabricated roller bars, with hydraulic tilt up to 120 Deg f, has forward and top pneumatic butterfly valve flour gate and (2) liquid inlets with flour dust vent and 125 Hp motor drive. Remote control panel has PLC controller with touch pad and panelview, power and mixer on, raise / lower bowl, mixer jog, mixer start, stop with e-stop push button controls. Mounted on heavy duty stainless steel bolt down frame. Ideal for mixing breads, rolls, buns, flour tortillas, croissants, bagels, pizza and english muffins.

OAD: 144" L x 60" W x 92" H

Oakes Mixer Paste Horizontal 2MBTIA

• Manufacturer: Oakes
• Model Number: 2MBTIA
• Frain Number: R32140

Oakes Model 2MBTIA, jacketed, high shear, continuous, lab size R & D, rotor and stator pin mill mixer rated from 10 to 120 lb of product per hour – depending on materials, application, environment and machine configuration. 316 stainless steel mixing head. Equipped with 9" diameter x 12" deep stainless steel supply hopper, APV R series positive displacement feed pump powered by ½ Hp motor drive and 2" diameter mixing head with 1"OD / ¼" ID Tri-Clamp style center product discharge powered by 1 Hp motor drive. Control panel has touch pad variable speed and digital speed displays for pump and rotor. Mounted on an aluminum base designed for cart or bench top use.

OAD: 30"L x 25"W x 32"H

Cornell Mixer Paste Horizontal D26

• Manufacturer: Cornell
• Model Number: D26
• Frain Number: R30660

Cornell Model D26 "Versator" rated from 5 to 125 gallons of product per minute – depending on materials and application. All stainless steel contact parts. Equipped with 26" ID product rotating disc, with (2) 2-1/2" OD / 2-1/4 ID side chamber in feed and discharge product ports, (1) 3-3/4" OD / 3-1/2" ID top vacuum port, with pressure gauge and 2" OD bottom drain. Swing open clamp down door has 7" OD, flanged front port with (6) 3/4" bolts on 2-3/4" centers and 3-3/4" OD sight port and 25 Hp belt to motor drive with cage style safety guarding. Mounted on 61" long x 40" wide painted platform style base frame.
Operation: Product flows thru film forming ring, out and then over the surface of rotating disc where the dispersion, deaeration or defoaming action occurs.

OAD: 72" L x 67" W x 72" H

Cornell Mixer Paste Horizontal D26

• Manufacturer: Cornell
• Model Number: D26
• Frain Number: R30663

Cornell Model D26 "Versator" rated from 5 to 125 gallons of product per minute – depending on materials and application. All stainless steel contact parts. Equipped with 26" ID product rotating disc, with (2) 2-1/2" OD / 2-1/4 ID side chamber in feed and discharge product ports, (1) 3-1/4" OD / 3" ID top vacuum port, with pressure gauge and 2" OD bottom drain. Swing open clamp down door has 7" OD, flanged front port with (6) 3/4" bolts on 3" centers and 3" OD sight port with 25 Hp belt to motor drive. Side mounted 40" High x 8" OD product tank with 14" x 14" x 24" conical product feed hopper system with independent motor drive. Control panel has main machine and vacuum on / off switches. System is mounted on 72" long x 70" wide platform style frame.
Operation: Product flows thru film forming ring out and then over the surface of rotating disc where the dispersion, deaeration or defoaming action occurs.

OAD: 72" L x 70" W x 76" H

Oakes Mixer Paste Horizontal 2MBTIA

• Manufacturer: Oakes
• Model Number: 2MBTIA
• Frain Number: R30082

Oakes Model 2MBTIA, jacketed, high shear continuous, lab size R & D pin mill mixer rated from 10 to 120 lb of product per hour – depending on materials, application, environment and machine configuration. Equipped with 9½" OD x 20" deep (5 gallon) supply hopper, SPX Model R0 positive displacement feed pump powered by ½ Hp motor drive and 2" diameter mixing head with 1"OD / ¼" ID Tri-Clamp style center product discharge powered by 1 Hp motor drive. Control panel has touch pad variable speed and digital speed displays for pump and rotor.

OAD: 42"L x 25"W x 32"H

Oakes Mixer Paste Horizontal 4MB3A

• Manufacturer: Oakes
• Model Number: 4MB3A
• Frain Number: R30081

Oakes Model 4MB3A, lab model, continuous mixer, aerator rated from 25 lbs to 500 lbs per hour – depending on materials and application. Equipped with mixing head of two stators and a rotor, and is assembled with the stators surrounding the rotor. The rows of blades on the rotor are located between those on the stators, with no contact between moving and stationary elements. The mixing takes place between the teeth of the rotor and each of the two stators. Ingredients enter the head through the center of the rear stator, flow in a swirling path between the blades of the rotor and rear stator to the outer circumference of the stator cavity, then between the teeth of the front stator and rotor and out the center of the front stator. Product is discharged under pressure, it may be piped directly to the point of use thus eliminating any manual handling of the finished material. Air or other gas may be incorporated in the mixture and evenly distributed throughout the whole mass. The stator members are jacketed through which coolants may be circulated, thereby removing heat energy added as a result of the mixing action.
OAD: 3’L x 3’W x 5’H

Oakes Mixer Paste Horizontal 8MV50

• Manufacturer: Oakes
• Model Number: 8MV50
• Frain Number: 5G9630

Oakes, Model 8MV50, jackted high shear continuous rotor stator pin mill mixer with 316 stainless steel contact parts. Rated from 150 to 1000 lb per hour – depending on materials, application, environment and machine configuration. Equipped with Waukesha, Model 25, positive displacement feed pump with a 2"OD / 1½"ID seated bevel style inlet and a 8" diameter mixing head with 2"OD/1½"ID seated bevel style center product discharge with 30" ground clearance powered by a 50 hp drive. Mounted on painted base frame.

OAD: 97"L x 53"W x 60"H