Ribbon S. S. Machines

Used Ribbon S. S. Equipment

Stainless steel ribbon powder blenders or mixers have been the most widely used mixers for both dry powders and incorporating some liquids into a dry mixture. Stainless steel ribbon powder mixers can handle a wide variety of product and sizes for making good mixtures. Stainless steel ribbon powder mixers usually are the slowest type of mixers to achieve the required mixture but they do not generate high heat and can actually unmix materials if left in the mixing mode for too long a period. The materials of construction can be carbon steel with total dry mixes and non-corrosive materials to all stainless steel and other specialty steels for maintaining the integrity of the mixer.

Contact Us

Ribbon S. S. Equipment In Stock

J H Day Mixer Powder Ribbon S. S. 25 FT³

  • Manufacturer: J H Day
  • Model Number: 25 FT³
  • Frain Number: 5H5185

J H Day, 25 ft³, double ribbon mixer with pounds of product per hour – depending on materials and application. 304 stainless steel contact parts and Inner mixing chamber dimensions of: 67" in Length; 26" in Width; 28" in Depth. Equipped with flip up cover and flip up safety grate, 3" OD mixing shaft with 1¼" wide x (3/8)" thick (outer) and 1½" wide x (1/8)" thick (inner) stainless steel ribbons. 3½" OD center bottom discharge with manual slide gate and 36" ground clearence. Mounted on (4) leg frame.

OAD: 100"L x 36"W x 84"H

Get a Free Quote Call: 630-629-9900

Ross Mixer Powder Ribbon S. S. RB1CUFT

  • Manufacturer: Ross
  • Model Number: RB1CUFT
  • Frain Number: R30051

Ross, 1 ft³, double ribbon mixer with 304 stainless steel contact parts. Inner mixing chamber dimensions: 19½" in Length; 12" in Width; 14" in Depth. Equipped with flip up cover and lift out grate with safety switch, 1¼" OD shaft, with 1" wide (outer) and 1" wide (inner) x ¼ " thick stainless steel ribbons. 3" OD center bottom discharge has hand operated butterly valve with 33" floor clearence, vari speed ¾ hp motor with forward/off/reverse control switch and mounted on mild steel (4) leg base frame with casters.

OAD: 45" L x 26" W x 53" H

Get a Free Quote Call: 630-629-9900

Mixer Powder Ribbon S. S. 70 FT³

  • Model Number: 70 FT³
  • Frain Number: 5H4466

75 ft³ (70 ft³ working capacity), 304 stainless steel double ribbon mixer with pound of product per hour – depending on materials and application. Inner mixing chamber dimensions: 96" in Length; 38" in Width; 40" in Depth. Equipped with dual flip up covers, 12" OD charge port, 4½" OD mixing shaft with 1¼" wide x (3/8)" thick (outer) and 2" wide x ¼" thick (inner) stainless steel ribbons. 9" OD center bottom discharge has manual slide valve with 43" floor clearence and 20 Hp motor drive. Mounted on (4) leg base frame.

OAD: 155" L x 46" W x 95" H

Get a Free Quote Call: 630-629-9900

J H Day Mixer Powder Ribbon S. S. 5 CU FT

  • Manufacturer: J H Day
  • Model Number: 5 CU FT
  • Frain Number: R21766

5 Cuft, 304 S/S, fully jacketed, single shaft double ribbon blender (37 gallon working capacity) and a 6 cubic foot (45 gallon) overall capacity. Has side liquid injection w/ 5 ports. Chamber measures 38"(W) x 17"(L) x 18"D). Jacket working pressure 80 psi @ 324 Deg. F. Shell working pressure is Atmosphere @ 324 Deg. F. Jacket has (2) 1" side inlet/outlet ports, (2) 1" bottom inlet/outlet ports, and (2) 3/16" side pressure relief ports. Equipped with dual hinged dust tight lid with a 7/8" center vent, sanitary stuffing box, continuous ribbon agitator with the inner spokes measuring 3/16”(thick) x 1 ”(high), outer spoke 3/8” (thick) x 1"(high), 3" dust tight slide gate center bottom discharge at 35” from the ground. Allen Bradley start/stop controls and safety switches. Mounted on casters. National Board # 1677
(OAD: 65"(L) x 24"(W) x 52"(H).

Get a Free Quote Call: 630-629-9900

Scott Mixer Powder Ribbon S. S. GHPM6010

  • Manufacturer: Scott
  • Model Number: GHPM6010
  • Frain Number: 5H3921

Scott, 10 ft³ (8 ft³ workable), 304 S/S double ribbon/paddle mixer. Inner mixing chamber dimensions: 36" in Length; 22" in Width; 24" in Depth. Equipped with 3" diameter shaft with 7" x 3½" stainless steel paddles powered by 5 Hp drive, 4" diameter center bottom discharge with manual slide gate valve. Pounds of product per hour dependant on marterials and application. Mounted on four leg frame.

OAD: 43" L x 31" W x 80" H

Get a Free Quote Call: 630-629-9900

Lowe Mixer Powder Ribbon S. S. C30

  • Manufacturer: Lowe
  • Model Number: C30
  • Frain Number: 5H3873

Lowe, Model C30, 30 ft³ workable, double ribbon mixer with 304 stainless steel contact parts. Inner mixing chamber dimensions: 72" in Length; 28" in Width; 30" in Depth. Equipped with dual flip up covers, 3" OD mixing shaft with 1½" wide x ½" thick (outer) and 2" wide x ¼" thick (inner) stainless steel ribbons powered by 15 Hp motor drive. 6" OD center bottom manual slide gate discharge with 38" ground clearence. Control panel with on / off switch and push button start / stop/. Mounted on (4) leg base frame with 6"OD connection for fume removal.

OAD: 104"L x 48"W x 86"H

Get a Free Quote Call: 630-629-9900

Babcock Gardner Mixer Powder Ribbon S. S. L SERIES 400L

  • Manufacturer: Babcock Gardner
  • Model Number: L SERIES 400L
  • Frain Number: 5F4270

17 cu ft, 304 Stainless steel, L Series, ribbon mixer. Chamber dimmensions: 85" in Length x 22" in Width x 28" in Depth with flip top cover, 3" OD center shaft with 1-1/4" wide x 1/4" thick single ribbons on 1-1/4" 1" OD spokes, 6" OD end bottom discharge with manual open discharge valve with 11" floor clearence.

OAD: 130" L x 32" W x 48" H

Get a Free Quote Call: 630-629-9900

American Process Systems Mixer Powder Ribbon S. S. 20 FT³

American Process, 20 ft³, 316 stainless steel ribbon mixer with pounds of product per hour – depending on materials and application. Toatal capacity: 20 ft³ Working capacity: 17 ft³. Single trough dimensions: 60" in Length; 24" in Width; 28" in Depth. Equipped with lift up safety grate, 1" wide x ¼" thick (outer) / 2" wide x (1/8)" thick (inner) stainless steel ribbons and single end pneumatic gate discharges with 61" ground clearance.Powered by a 7½ hp drive.

OAD: 90"L x 34"W x 90"H

Get a Free Quote Call: 630-629-9900

Aaron Mixer Powder Ribbon S. S. 25 FT³

  • Manufacturer: Aaron
  • Model Number: 25 FT³
  • Frain Number: 5H4465

Aaron, 25 ft³ (23 ft³ working capacity), 304 stainless steel double ribbon mixer with pound of product per hour – depending on materials and application. Inner mixing chamber dimensions: 66" in Length; 26" in Width; 30" in Depth. Equipped 4" OD mixing shaft with ¾" wide x ¼" thick (outer) and 2" wide x ¼ thick (inner) stainless steel ribbons. 6" OD center bottom discharge with manual slide valve and 45" floor clearence. Mounted on (6) leg base frame.

OAD: 143" L x 32" W x 88" H

Get a Free Quote Call: 630-629-9900

Mepaco Mixer Powder Ribbon S. S. 170

  • Manufacturer: Mepaco
  • Model Number: 170
  • Frain Number: R30125

Mepaco, Model 170, 304 stainless steel dual trough jacketed ribbon blender Rated from 0 to150 pounds of product per batch – depending on materials application and machine configuration. Capacity: 2½ ft³ total (2 ft³ working). Dual trough dimensions: 25" in Length; 22" in Width; 15" in Depth. Equipped with lift up top coverand lift up grate, dual pneumatic gate discharges with 30" ground clearance. Powered by (2) 1 Hp motor drives with mechanical variable speed. Control panel has start / jog / stop and switches for mix / unload / reverse and open / close for both discharge doors. Mounted on heavy duty base frame with casters.

Top Ports:
(1) 1" NPT
(1) ¼" NPT

Jacket Ports:
(4) 1" NPT

MAWP: 100 psi @ 338°F
MDMT: -20°F @ 115 psi
Nat’l Brd: 10711

OAD: 46"L x 40"W x 51"H

Get a Free Quote Call: 630-629-9900

Toronto Mixer Powder Ribbon S. S. CDR24

  • Manufacturer: Toronto
  • Model Number: CDR24
  • Frain Number: 5G5502

Toronto Coppersmithing, Model CDR 24, 37 ft³ (27 ft³ workable), single ribbon mixer with 304 stainless steel contact parts. Inner mixing chamber dimensions: 60" in Length; 30" in Width; 39" in Depth. Equipped with flip up cover, 2½" diameter motor shaft, 3½" diameter mixing shaft with 2" wide x ½" thick stainless steel ribbons. 6" diameter center bottom discharge has ____ valve with 48" floor clearence and 30 Hp motor. Mounted on mild steel (4) leg base frame.

OAD: 105" L x 33" W x 93" H

Get a Free Quote Call: 630-629-9900

Scott Equipment Co Mixer Powder Ribbon S. S. TB1610

Scott Equipment Model TB1610, stainless steel, continuous ribbon / paddle mixer with pounds of product per hour – depending on materials, application and machine configuration. Chamber dimensions: 120" in Length; 24" ID. Equipped with dual 14" long x 10" wide top product feed ports and dual 34" long x 8" wide flip-up bolt down top access covers and 92" long bolt down flip open bottom access doors. Has inner 6" long x 3" wide paddles and 1" wide x 1/2" thick single ribbon on 1" OD spokes set on 4" OD shaft. 20" long x 11" wide flanged end bottom discharge with (8) 1/4" bolts holes set on 6" centers with 19" floor clearence. 7-1/2 Hp belt to motor drive with safety guarding. Mounted on stainless steel base frame. This style of mixer uses both the paddle agitator design and simultaneously giving end-to-end mixing action of the ribbon design.

OAD: 160" L x 36" W x 54" H

Get a Free Quote Call: 630-629-9900