Feeder Machines

MGS Feeder Coupon Inserter RPP420DCSU

• Manufacturer: MGS
• Model Number: RPP420DCSU
• Frain Number: 5H0489

MGS, Model RPP-420D-CSU, automatic, rotary feeder. Rated from 10 to 400 picks per minute – depending on materials, application and machine configuration. Product size: 1½" to 18" in Width; 1½" to 5" in Height. Equipped with an 80" long powered magazine, with (4) head, rotary vacuum suction cup pick n place.

OAD: 95"L x 36"W x 16"H

Mepaco Feeder Auger 105

• Manufacturer: Mepaco
• Model Number: 105
• Frain Number: 5H0320

Mepaco, Model 105, 2,500lb capacity, stainless steel, single auger and pump feeding system with gallons and pounds of product per hour – depending on materials and application. Equipped with 120" in Length; 50" in Width; 32" in Depth product mixing chamber with 9" OD x 136" long stainless steel feeding screw powered by 5 Hp motor drive with a 47:1gearbox for final revolutions of 37 per minute. 20 Hp Waukesha Model 224 positive displacement pump with 4¾" OD / 4" ID Tri-Clamp style discharge with a 15.66:1 gear ratio for 57 GPM. Control cabinet with push button start / stop / reset and forward / reverse switch. Mounted on a stainless steel frame.

OAD: 182"L x 69"W x 44"H

Doering Feeder Auger 12 X 12

• Manufacturer: Doering
• Model Number: 12 X 12
• Frain Number: 5F4757

150 FT³, stainless steel, quad screw, pump feeding system. Vessel dimensions: 84" in Length; 72" in Width; 48" in Depth. Product viscocity: up to 1,000,000 CPS. Pressure rating: up to 160 psi. Equipped with a stainless steel product hopper with a powered flip top cover, four 12" diameter x 84" long stainless steel feeding screws, 10 hp drive currently geared to 4.1 revolutions per minute, 10 hp positive displacement pump, and a 4.5" Tri-Clover discharge. Mounted on a stainless steel frame with locking casters.

OAD: 126" L x 96" W x 79" H

Flexicon Feeder Auger 1450

• Manufacturer: Flexicon
• Model Number: 1450
• Frain Number: R30210

Flexicon, Model 1450, 4" diameter x 120" long screw conveyor. Capable of transferring up to 140 ft³ of product per hour – depending on materials, application and product density. Equipped with a 36” long x 36” wide x 27” deep product hopper with grated cover, 3" diameter x 151" long stainless steel product conveying screw, 4" diameter x 120" long flexable poly tube, top 3 Hp motor drive with 6” inside diameter product discharge port.

Feeder Incline/Cleated 77" DISCH

• Model Number: 77" DISCH
• Frain Number: 5H4300

Hexcore stainless steel, inclined cleated feed conveyor with pounds of product per hour – depending on materials and application. Equipped with 34" long x 41" wide x 18" deep stainless steel product hopper with 24" Wide x 130" Long, neoprene belt, incline cleated belt conveyor has 32" high infeed with 2" high cleats set on 12½" centers and 77" discharge height with top mounted ½ Hp motor drive. Mounted on a (4) leg stainless steel frame

OAD: 135" L x 54" W x 84" H

MRM Elgin Feeder Incline/Cleated 77" DISCH

• Manufacturer: MRM Elgin
• Model Number: 77" DISCH
• Frain Number: 5H3924

MRM Elgin, stainless steel incline cleated belt feeder with amount of product per hour – depending on materials an application. Equipped with 30½" wide x 36" long x 22" deep (14 ft³) stainless steel product hopper, 13" wide belt conveyor with 3/16" high cleats set on 3-3/16" centers, 77" discharge height with 2¼" wide chute and 77" ground clearance. Powered by .89 hp motor drive. Mounted on stainless steel base frame.

OAD: 49" L x 32" W x 104" H

MGS Feeder Outserter TOPSERTER II

• Manufacturer: MGS
• Model Number: TOPSERTER II
• Frain Number: R30491

MGS Model Topserter ll, high speed, 4 head rotary, pick and place coupon feeder rated from 40 to 240 cycles per minute with timing screw – depending on materials and application. Product size range: 1.12" to 2" in Width; 1.12" to 2" in Height and .06" to .75" thick with 4 heads. Equipped with 36" long x 1-3/4" wide x 1" high single coupon magazine, 4-head rotary vacuum suction cup pick n place, 24" long worm screw, Nordson Problue hot melt glue system, vacuum pump, with seko guages and is hand crank adjustable. Control panel has A/B controller and A/B Panelview with on and e-stop push button controls, and statis light bar. Mounted on "H" style base frame with safety guarding, casters and leveling legs.

OAD: 84" L x 48" W x 64" H

Ram Equipment Inc Feeder Auger PUMP AUGER FEEDER

• Manufacturer: Ram Equipment Inc
• Model Number: PUMP AUGER FEEDER
• Frain Number: R29950

Ram Equipment Industries / Moline, jacketed, stainless steel, auger and pump feeding system. Equipped with 18" in Length; 15-1/4" in Width; 16" in Depth, jacketed hopper (rated to MAWP of 150psi @ 300°F and MDMT of -20°F @ 150psi), with two 4" diameter feed screws powered by 1/2 Hp motor drive. Waukesha model 34 jacketed head PD pump with 2½"OD / 1-3/4"ID sanitary in feed and discharge ports with 3 Hp motor drive. Control panel has system power on, pump and auger / roller start and stop, auger forward / reverse and speed controls. Mounted on a stainless steel frame with casters. Pounds of product per hour dependent on materials, application and machine configuration.

OAD: 68" L x 55" W x 58" H

Ram Equipment Inc Feeder Auger DOUGH PUMP FEEDER

• Manufacturer: Ram Equipment Inc
• Model Number: DOUGH PUMP FEEDER
• Frain Number: R29651

Ram Industries, 8 ft³ stainless steel, auger and pump feeding system. Hopper dimensions: 36" in Length; 20" in Width; 20" in Depth. Equipped with a stainless steel product hopper, (2) 10" diameter x 54" long stainless steel feeding screws powered by a ½ hp drive with a 605:1gearbox for final revolutions of 2.8 per minute.Waukesha model 134 positive displacement pump with a 3½"OD / 3"ID Tri-clamp style discharge with a 59.38:1 gear ratio for 7.25 GPM.

OAD: 132"L x 48"W x 55"H

Feeder Auger 9FT³

• Model Number: 9FT³
• Frain Number: 5H2883

Stainless steel auger and pump feeding system. Hopper dimensions: 65" in Length; 32" in Width; 35" in Depth (approx 9 ft³). Equipped with a stainless steel product hopper, 5" diameter x 64" long stainless steel feeding screw powered by a 1 hp drive. 1½ Hp Waukesha model 40 positive displacement pump with a 2½"OD / 2"ID Tri-Clamp style discharge with a 29.31:1 gear ratio for 4.5 GPM. Control cabinet with an AB controller, AB PanelView Plus 700 touch screen HMI and variable speed controls. Mounted on a stainless steel base frame with casters.

OAD: 100"L x 60"W x 68"H

WCB APV Anderson Cherry Burell Feeder Weigh 530

• Manufacturer: WCB APV Anderson Cherry Burell
• Model Number: 530
• Frain Number: 5G9735

WCB / APV / Anderson, Model LF530, Automatic, stainless steel, weighing, feeding and blending system with gallons of product per hour – depending on materials and application. Equipped with 19" ID x 17" Deep, 20 gallon, stainless steel ingredient hopper with (2) blade agitator, safety grid and see thru flip up molded plastic cover with automatic shut-off. Auger and blender tube with outlet, feed funnel has see-thru cover to rotor and scraper with enrobing case inlet. Control panel has controller with touch pad controls and start, stop, rotor, blender and agitator speed controls with auger and rotor speed indicators. Mounted on stainless steel frame with caster.
Designed to accurately and evenly meter ingredients into a viscous liquid product stream such as fruits and nuts (the ingredient), ice cream (the product) from a continous ice cream freezer and drop from the hopper into rotor enrobing chambers, deposits ingreidents to the product stream, blended and sent to filler.

OAD: 56" L x 24" W x 68" H

Kalish Feeder Incline/Cleated SDR1

• Manufacturer: Kalish
• Model Number: SDR1
• Frain Number: 5H0116

Kalish, Model SDR1, automatic stainless steel water fall style cap elevator / feeder and sorter. Rated from 50 to 300 caps per minute – depending on materials and application. Capable of handling screw, snap or childproof caps (with proper change parts). Equipped with a 34" wide x 21" long x 15" deep (5 ft³) cap hopper, 10½" wide x 60" long cleated cap conveyor belt with ¼" high cleats on 3" centers, 40" long adjustable discharge chute with 37" discharge height. Mounted on a stainless steel base frame with casters.

OAD: 50"L x 45"W x 71"H