Cooling Wheels Machines

Cooling Wheels Equipment In Stock

Candy Cooling Wheels DRUM

  • Model Number: DRUM
  • Frain Number: 5E1927

Stainless steel, single wall cooling drum. Drum Dimensions: 51½" surface width x 78" diameter. Equipped with (2) 18" diameter sight glasses ( one on each side) and (2) 2¼" NPT inlet/outlet on the drive shaft of drum for internal spray wands with nozzles to spray chilled water on the inside surface of the drum. Last used in candy operation.

OAD: 78"L x 60"W x 78"H

Get a Free Quote Call: 630-629-9900

Klockner Hansel USA Crosio Candy Cooling Wheels COOL ROLLS

Stainless steel, continuous, dual wheel cooling system capable of up to 1000 Kg or 2,200 lbs of product per hour (depending on application). Has dual 40" diameter, by 28 3/8" surface face, stainless steel cooling wheels, water chilled with temperature reduction from 59 to 46 deg F. Polished drum surface, insulated sides, closed – loop water re-circulation, and interior water spray systems, with 2" O.D. threaded inlet/outlet ports each drum. 30" L x 6" W x 8" D top product port, and 29" W scraper blade, and is mounted on common frame with 4 legs.

OAD: 60" L x 69"W x 138" H

Get a Free Quote Call: 630-629-9900

Sollich Candy Cooling Wheels 60300

  • Manufacturer: Sollich
  • Model Number: 60300
  • Frain Number: 5F4082

Sollich Model 60300, 1800Wet, 75" long x 48" OD stainless steel caramel depositing chilling drum with production rates – depending on product being run. Equipped with (6) Festo 3/4" OD depositing nozzles with maximum pressure rating of 10 bar and above drum product detection eye and is mounted on (4) leg stainless steel base frame.

OAD: 156" L x 84" W x 60" H

Get a Free Quote Call: 630-629-9900

Candy Cooling Wheels

  • Model Number:
  • Frain Number: 5E8640

Stainless steel chilled roller mill. Equipped with (1) 36" diameter roller with 1 1/2" & 7/8" inlet / outlets & (1) 18" diameter roller with 7/8" & 1" inlet/outlets, adjustable infeed size 42 1/2"L x (35" – 50")W. Currently set at 43"W. 5hp Baldor motor. Unit mounted on mild steel frame. Last used to chill caramel & nugat in candy operation.

OAD: 98"L x 102"W x 54"H

Get a Free Quote Call: 630-629-9900

Candy Cooling Wheels 2 ROLL COOLER

  • Model Number: 2 ROLL COOLER
  • Frain Number: 5D5011

Stainless steel chilled roller mill. Equipped with (1) 36" diameter roller with 4" diameter I.D. inlet/outlet, (1) 18" diameter, fixed size infeed at 40"L x 36"W, and a pneumatic topping depositor arm. Powered by a 1 hp Dynamic motor. Unit mounted on mild steel frame. Last used to deposit carmel topping.

OAD: 83"L x 86"W x 43"H

Get a Free Quote Call: 630-629-9900

Candy Cooling Wheels

  • Model Number:
  • Frain Number: 5E6740

Stainless steel, three roll cooling wheel. Equipped with three 18" diameter x 18" wide stainless steel rollers, top two counter rotating rolls, hand crank adjustment for roller spacing, 1" threaded fittings for heating / cooling media, lexan barrier guarding and chain drive.

OAD: 67"L x 43"W x 61"H

Get a Free Quote Call: 630-629-9900