Feeder Machines

Gough Econ Feeder Auger 14" DIA

• Manufacturer: Gough Econ
• Model Number: 14" DIA
• Frain Number: 5G8587

Gough Econ, 335" long x 14" diameter, stainless steel, screw feeder. Equipped with 19" OD / 15" ID flanged top infeed, 5 hp drive, and (4) 19" x 19" flanged discharges.

OAD: 357"L x 23"W x 38"H

Feeder Incline/Cleated 103" DISCH

• Model Number: 103" DISCH
• Frain Number: 5J3995

Inclined cleated conveyor, stainless steel. Equipped with a 20" infeed height, 20" wide blue conveyor belt with 2" cleats set on 8" centers. Conveyor has a 48" long bottom horizontal run, 120" long incline, 20" long top horizontal run and a 103" discharge height. Powered by a ½ hp motor drive with variable speed control and mounted on a (4) leg stainless steel base frame.

OAD: 165"L x 42"W x 105"H

Sidel Feeder Incline/Cleated 2024

• Manufacturer: Sidel
• Model Number: 2024
• Frain Number: 5J4163

Sidel, model 2024, automatic stainless steel water fall style cap elevator / feeder and sorter. Rated from 50 to 300 caps per minute – depending on materials and application. Capable of handling screw, snap or childproof caps (with proper change parts). Equipped with a 24" wide cleated cap conveyor belt with (3/8)" high cleats on 2(1/8)" centers, 42" long x 40" wide x 32" deep stainless steel bulk product hopper and discharge chute with 216" discharge height.

OAD: 77"L x 58"W x 241"H

Sidel Feeder Incline/Cleated GEBO AIDLIN

• Manufacturer: Sidel
• Model Number: GEBO AIDLIN
• Frain Number: 5J4162

Sidel, model Gebo Aidlin, automatic stainless steel water fall style cap elevator / feeder and sorter. Rated from 50 to 2000 caps per minute – depending on materials, application and machine configuration. Capable of handling screw, snap or childproof caps (with proper change parts). Equipped with a 48" wide x 52" long x 30" deep split hopper, (1) 24" wide belt with ½" high cleats set on 2(1/8)" centers with a discharge height of 150" and (1) 12" wide belt with (5/8)" high cleats set on 2(1/8)" centers with a discharge height of 132".

OAD: 70"L x 62"W x 166"H

Smalley Feeder Incline/Cleated 80" DISCH

• Manufacturer: Smalley
• Model Number: 80" DISCH
• Frain Number: 5J3991

Smalley, Stainless steel incline cleated belt conveyor with amount of product per minute and hour – depending on materials and application. Equipped with 135" long x 48" wide belt with 3" high cleats set on 8" centers, 27" to 34" high infeed and 78" to 85" discharge. Mounted on stainless steel frame with casters.

OAD: 128" L x 71" W x 83" H

Flexicon Feeder Auger 1450 5FT³

• Manufacturer: Flexicon
• Model Number: 1450 5FT³
• Frain Number: R36273

Flexicon, Model 1450, Rated up to 140 ft³ of product per hour – depending on materials, application and product density. Equipped with 30” long x 30” wide x 24” deep stainless steel agitated product hopper and cover with ½ Hp agitator drive, and mounted on (4) legs, with 3" OD x 151" long stainless steel product conveying screw, 4" OD x 120" long flexible poly tube and has top mounted 3 Hp motor drive with 6” ID product discharge port Control panel has start, stop, e-stop controls. Mounted on stainless steel Model PB1-S-X Portable base with support mast and has (2) 6" swivel casters with brake under hopper and (2) 6" rigid casters with extended length base and Tilt-Down support mast with manually actuated hydraulic jack.

OAD: 152" L x 46" W x 132" H

Dorner Feeder Incline/Cleated LPZ3210289

• Manufacturer: Dorner
• Model Number: LPZ3210289
• Frain Number: 5J3651

Dorner, Model LPZ3210289, inclined cleated conveyor. Equipped with 18" wide x 144" long belt with ½" high cleats set on 26½" centers.50" long horizontal run has a 8" in feed height. 70" long incline section and 24" long top horizontal section with 34" discharge height and variable speed controller.

OAD: 139"L x 44"W x 36"H

Hapman Feeder Auger HELIX

• Manufacturer: Hapman
• Model Number: HELIX
• Frain Number: 5J3811

Hapman screw conveyor with product hopper Rated from 120 to 360 ft³ with pounds of product per hour – depending on materials, application, environment and machine configuration. Equipped with 22” long x 22” wide x 13” deep stainless steel product hopper with safety grid and 4" ID x 108" long flexable poly tube with top mounted 3 Hp motor drive. 6” OD product discharge port with 96" ground clearance. Control panel with push button start / stop controls. Mounted on frame with casters.

OAD: 142"L x 56"W x 116"H

Hapman Feeder Auger HELIX

• Manufacturer: Hapman
• Model Number: HELIX
• Frain Number: 5J3810

Hapman, 400 series screw conveyor and product hopper. Equipped with 36” long x 36” wide x 30” deep stainless steel product hopper with safety grid, 4" ID x 125" long flexible poly tube and top mounted 3 Hp motor drive has 6” OD product discharge port with 105" ground clearance. Control panel with raise / lower switch, variable speed, E-stop and start / stop and reverse push button controls. Mounted on stainless frame with casters.

OAD: 165"L x 55"W x 140"H

Flexicon Feeder Auger 1450

• Manufacturer: Flexicon
• Model Number: 1450
• Frain Number: R34721

Flexicon, Model 1450, Capable of transferring up to 140 ft³ of product per hour – depending on materials, application and product density. Equipped with 36” long x 36” wide x 27” deep stainless steel agitated product hopper with cover and ½ Hp agitator drive, and mounted on (4) legs, with 3" OD x 151" long stainless steel product conveying screw, 4" OD x 120" long flexable poly tube and has top mounted 3 Hp motor drive with 6” ID product discharge port Control panel has start, stop, e-stop controls. Mounted on base frame.

Flexicon Feeder Auger 1450 5FT³

• Manufacturer: Flexicon
• Model Number: 1450 5FT³
• Frain Number: R36272

Flexicon, Model 1450, Rated up to 140 ft³ of product per hour – depending on materials, application and product density. Equipped with 30” long x 30” wide x 24” deep stainless steel agitated product hopper and cover with ½ Hp agitator drive, and mounted on (4) legs, with 3" OD x 151" long stainless steel product conveying screw, 4" OD x 120" long flexible poly tube and has top mounted 3 Hp motor drive with 6” ID product discharge port Control panel has start, stop, e-stop controls. Mounted on stainless steel Model PB1-S-X Portable base with support mast and has (2) 6" swivel casters with brake under hopper and (2) 6" rigid casters with extended length base and Tilt-Down support mast with manually actuated hydraulic jack.

OAD: 152" L x 46" W x 132" H

Pace Feeder Incline/Cleated 20 FT³

• Manufacturer: Pace
• Model Number: 20 FT³
• Frain Number: 5J3431

Pace incline cleated stainless steel feeder and hopper with amount of product per hour – depending on materials and application. Equipped with 38" wide x 44" long x 28" deep product hopper, 12" wide cleated belt conveyor with 2" high cleats set on 12" centers, 60" long incline section, 20" long top horizontal run, 12" x 12" discharge chute with 50" discharge height.

OAD: 101"L x 44"W x 73"H