Stay up to date with new inventory & industry news
Home » Mill » Hammer » Page 7
Hammer mills use rotating hammer or knives to break-up wet or dry product that has been fed into the chamber of the machine. The rotating hammers or knives in the chamber of a hammer mill reduce the side of the product by impacting the product and by forcing the product to impact the interior of the chamber. The hammers within the chamber of a hammer are sized so that the end of the hammer almost impacts the interior wall of the chamber. A hammer mill has a screen to form the bottom of the chamber. Once the product has been reduced to the proper size, the product falls through the screen below the chamber. The screen can be changed to allow.
Hammer mills can be designed with different numbers of hammers or blades. The proper number of hammers or blades for an application is based the product that is to be processed, the size reduction necessary from the hammer mill, the volume that the hammer mill must process, and other specifications of the application. The hammers in a hammer mill can also have different features. The hammers can have knife edges, blunt (impact) edges, or a knife edge and a blunt edge. The type of hammer needed for the application is based on the type of product that is to be processed by the hammer mill. Hammer mills can also have fixed or swinging hammers or blades.
Fitzmill, Model DAS06, stainless steel hammer mill with pounds of product per hour – depending on materials and application. Equipped with 20" wide x 20" long x 4" deep feed pan, (16) fixed knife / impact blades and 15" x 5" discharge with 32" of ground clearance. Mounted on (4) leg stainless steel frame with casters.
OAD: 48"L x 30"W x 61"H
Fitzmill, Model DKAS012, stainless steel hammer mill with pounds of product per hour – depending on materials and application. Equipped with 20" wide x 24" long x 4" deep feed pan, (32) 3" long x 1½" wide fixed knife blades and 12" x 15" discharge with 45" of ground clearance. Mounted on (4) leg stainless steel frame with casters
OAD: 50"L x 50"W x 78"H
Fitzmill, Model DASO6, stainless steel hammer mill with production rates per hour – depending on materials, application and machine configuration. Equipped with a 28" long x 20" wide x 4" deep feed pan, 6" wide x 4" high feed throat, 11” long x 6” wide blade chamber and (16) fixed knife/impact blades powered by a 7½ Hp motor drive. Product discharge is 15½” long x 5¾” wide with 34” floor clearance. Start / stop controls, mounted on (4) legs with casters.
OAD: 48"L x 35"W x 64"H
Micron Model Mikro 2DH, hammer mill, with rates of production per hour – depending on materials, application and machine coniguration. Equipped with stainless steel contact parts, 16" x 16" x 13" deep hopper, 12" long x 3" OD twin feed screws, (24) rotary split swing hammers driven by 15 Hp motor and has 24" OD cover with 5" OD air relief port. Main and feeder motor start and stop push button controls with e-stop. Mounted on (4) leg frame with casters.
OAD: 48" L x 48" W x 63" H
Fitz mill Model DAS06, 316 stain;ess steel, pan fed hammer mill . Equipped with 26" long x 20" wide stainless steel feed pan, with 6" x 11" feed throat and 16 fixed stainless steel blunt / knife blades with a discharge height of 36". Control panel with start, stop, e-stop controls and VFD. Mounted on (4) stainless steel legs with casters. Rates dependent on materials, application and machine configuration.
OAD: 52" L x 30" W x 66" H
Quadro Model 194S, 316 stainless steel particle size reduction Comil. Equipped with 14" diameter x 12" dep stainless steel product hopper, 6" diameter feed throat, 8" diameter screen and 10" diameter discharge port with 36" ground clearance. Variable speed. Rated from 1,800 to 4,000 lbs of product per hour – depending on materials, machine configuration and application.
OAD: 42"L x 30"W x 64"H
Fitzmill, Model DAS06, stainless steel hammer mill. with pounds of product per hour – depending on materials, application and machine configuration. Equipped with a 9" wide x 52" long x 5" deep vibratory feed pan and (16) fixed knife blades powered by 10 Hp motor drive. Product discharges onto a 16" wide inclined take away conveyor with 1" high cleats set on 12" centers and a 49" discharge height. Control panel with push button start / stop and variable speed touch pad.
OAD: 182"L x 45"W x 85"H
Quadro Model 197, 316 stainless steel particle size reduction Comil. Rated from 360 to 800 lbs of product per hour – depending on materials and application. Equipped with 10" diameter x 6" deep stainless steel product hopper, 3" diameter feed throat, 5" diameter screen and 6" diameter discharge port with 13" ground clearance. Mounted on stainless steel (4) leg base frame with variable speed control.
OAD: 28"L x 13"W x 32"H
Fitzmill, Model DAS06, stainless steel hammer mill. with pounds of product per hour – depending on materials and application. Equipped with 12" long x 12" wide x 12" deep (½ ft³) product hopper, 4" diameter feed screw with 2" centers powered by ¾ HP drive and (26) 4" long x 3" wide fixed knife blades powered by a 15 hp drive. Product discharge is 9½”L x 6” W with 31" of ground clearance. Mounted on (4) leg painted frame base.
OAD: 55"L x 40"W x 62"H
Fitzpatrick, Model JT, stainless steel homoloid mill. with production rates per minute – depending on materials, application and machine configuration. Equipped with 15" diameter x 10" deep feed hopper with 3" diameter feed throat, (15) fixed knife blades and 10" long x 6" wide bottom product discharge with 21” ground clearance. Push button start / stop controls. Mounted on stainless steel base frame with casters.
OAD: 42"L x 37"W x 47"H
Fitzmill, Model DKAS012, hammer mill with stainless steel contact parts. Production rates per hour – depending on materials, application and machine configuration. Equipped with an 8" diameter charge port and (32) 1½" wide by 3" long fixed knife blades powered by a 15 hp drive. 11"OD / 8"ID flanged product discharge with 12” floor clearance. Mounted on a (4) leg painted base frame. Used to grind, de-lump, pulverize and process wet / dry products.
OAD: 45"L x 36"W x 55"H
Mikro Pulverizer, Model 3MP, hammer mill with carbon steel contact parts. Production rates per hour – depending on materials, application and machine configuration. Equipped with a 13" x 4" feed throat, (3) 2" diameter feed augers powered by a ¾ HP drive and (16) 13" wide swinging impact hammers powered by a 50 HP drive. Reduced product is collected in a 35" diameter x 32" deep conical hopper with a 12" diameter flanged discharge with 72" ground clearance. Mounted on heavy duty (6) leg base frame.
OAD: 80"L x 67"W x 147"H
Sign up for our newsletter to receive the latest in packaging tips, case studies and more.