Hammer Machines

Used Hammer Equipment

Hammer mills use rotating hammer or knives to break-up wet or dry product that has been fed into the chamber of the machine. The rotating hammers or knives in the chamber of a hammer mill reduce the side of the product by impacting the product and by forcing the product to impact the interior of the chamber. The hammers within the chamber of a hammer are sized so that the end of the hammer almost impacts the interior wall of the chamber. A hammer mill has a screen to form the bottom of the chamber. Once the product has been reduced to the proper size, the product falls through the screen below the chamber. The screen can be changed to allow.

Hammer mills can be designed with different numbers of hammers or blades. The proper number of hammers or blades for an application is based the product that is to be processed, the size reduction necessary from the hammer mill, the volume that the hammer mill must process, and other specifications of the application. The hammers in a hammer mill can also have different features. The hammers can have knife edges, blunt (impact) edges, or a knife edge and a blunt edge. The type of hammer needed for the application is based on the type of product that is to be processed by the hammer mill. Hammer mills can also have fixed or swinging hammers or blades.
Contact Us

Related Categories

Hammer Equipment In Stock

Photo of Fitzmill Mill Hammer DAS06

Fitzmill Mill Hammer DAS06

Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06

Fitzmill Mill Hammer DAS06

  • Manufacturer: Fitzmill
  • Model Number: DAS06
  • Frain Number: R30008

Fitz mill Model DAS06, 316 stainless steel, pan fed hammer mill. Equipped with 26" long x 20" wide stainless steel feed pan, with 6" x 11" feed throat and 16 fixed stainless steel blunt / knife blades with a discharge height of 36". Control panel with start, stop, e-stop controls and VFD. Mounted on (4) stainless steel legs with casters. Rates dependent on materials, application and machine configuration.

OAD: 52" L x 30" W x 66" H

Get a Free Quote Call: 630-629-9900
Photo of Quadro Mill Hammer 194S

Quadro Mill Hammer 194S

Thumbnail of Quadro Mill Hammer 194S Thumbnail of Quadro Mill Hammer 194S Thumbnail of Quadro Mill Hammer 194S Thumbnail of Quadro Mill Hammer 194S

Quadro Mill Hammer 194S

  • Manufacturer: Quadro
  • Model Number: 194S
  • Frain Number: R29070

Quadro Model 194S, 316 stainless steel particle size reduction Comil. Equipped with 14" diameter x 12" dep stainless steel product hopper, 6" diameter feed throat, 8" diameter screen and 10" diameter discharge port with 36" ground clearance. Variable speed. Rated up to 4,000 lbs of product per hour – depending on materials, machine configuration and application.

OAD: 42"L x 30"W x 64"H

Get a Free Quote Call: 630-629-9900
Photo of Fitzmill Mill Hammer DAS06

Fitzmill Mill Hammer DAS06

Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06

Fitzmill Mill Hammer DAS06

  • Manufacturer: Fitzmill
  • Model Number: DAS06
  • Frain Number: R29370

Fitzmill, Model DAS06, stainless steel hammer mill. with pounds of product per hour – depending on materials, application and machine configuration. Equipped with a 9" wide x 52" long x 5" deep vibratory feed pan and (16) fixed knife blades powered by 10 Hp motor drive. Product discharges onto a 16" wide inclined take away conveyor with 1" high cleats set on 12" centers and a 49" discharge height. Control panel with push button start / stop and variable speed touch pad.

OAD: 182"L x 45"W x 85"H

Get a Free Quote Call: 630-629-9900
Photo of Quadro Mill Hammer 197

Quadro Mill Hammer 197

Thumbnail of Quadro Mill Hammer 197 Thumbnail of Quadro Mill Hammer 197 Thumbnail of Quadro Mill Hammer 197 Thumbnail of Quadro Mill Hammer 197 Thumbnail of Quadro Mill Hammer 197

Quadro Mill Hammer 197

  • Manufacturer: Quadro
  • Model Number: 197
  • Frain Number: R29071

Quadro Model 197, 316 stainless steel particle size reduction Comil. Rated from 360 to 800 lbs of product per hour – depending on materials and application. Equipped with 10" diameter x 6" deep stainless steel product hopper, 3" diameter feed throat, 5" diameter screen and 6" diameter discharge port with 13" ground clearance. Mounted on stainless steel (4) leg base frame with variable speed control.

OAD: 28"L x 13"W x 32"H

Get a Free Quote Call: 630-629-9900
Photo of Fitzmill Mill Hammer DAS06

Fitzmill Mill Hammer DAS06

Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06

Fitzmill Mill Hammer DAS06

  • Manufacturer: Fitzmill
  • Model Number: DAS06
  • Frain Number: 5H2890

Fitzmill, Model DAS06, stainless steel hammer mill. with pounds of product per hour – depending on materials and application. Equipped with 12" long x 12" wide x 12" deep (½ ft³) product hopper, 4" diameter feed screw with 2" centers powered by ¾ HP drive and (26) 4" long x 3" wide fixed knife blades powered by a 15 hp drive. Product discharge is 9½”L x 6” W with 31" of ground clearance. Mounted on (4) leg painted frame base.

OAD: 55"L x 40"W x 62"H

Get a Free Quote Call: 630-629-9900
Photo of Fitzmill Mill Hammer JT

Fitzmill Mill Hammer JT

Thumbnail of Fitzmill Mill Hammer JT Thumbnail of Fitzmill Mill Hammer JT Thumbnail of Fitzmill Mill Hammer JT Thumbnail of Fitzmill Mill Hammer JT

Fitzmill Mill Hammer JT

  • Manufacturer: Fitzmill
  • Model Number: JT
  • Frain Number: R28902

Fitzpatrick, Model JT, stainless steel homoloid mill. with production rates per minute – depending on materials, application and machine configuration. Equipped with 15" diameter x 10" deep feed hopper with 3" diameter feed throat, (15) fixed knife blades and 10" long x 6" wide bottom product discharge with 21” ground clearance. Push button start / stop controls. Mounted on stainless steel base frame with casters.

OAD: 42"L x 37"W x 47"H

Get a Free Quote Call: 630-629-9900
Photo of Fitzmill Mill Hammer DKAS012

Fitzmill Mill Hammer DKAS012

Thumbnail of Fitzmill Mill Hammer DKAS012 Thumbnail of Fitzmill Mill Hammer DKAS012 Thumbnail of Fitzmill Mill Hammer DKAS012 Thumbnail of Fitzmill Mill Hammer DKAS012

Fitzmill Mill Hammer DKAS012

  • Manufacturer: Fitzmill
  • Model Number: DKAS012
  • Frain Number: 5H2670

Fitzmill, Model DKAS012, hammer mill with stainless steel contact parts. Production rates per hour – depending on materials, application and machine configuration. Equipped with an 8" diameter charge port and (32) 1½" wide by 3" long fixed knife blades powered by a 15 hp drive. 11"OD / 8"ID flanged product discharge with 12” floor clearance. Mounted on a (4) leg painted base frame. Used to grind, de-lump, pulverize and process wet / dry products.

OAD: 45"L x 36"W x 55"H

Get a Free Quote Call: 630-629-9900
Photo of Hosokawa Mill Hammer 3MP

Hosokawa Mill Hammer 3MP

Thumbnail of Hosokawa Mill Hammer 3MP Thumbnail of Hosokawa Mill Hammer 3MP Thumbnail of Hosokawa Mill Hammer 3MP Thumbnail of Hosokawa Mill Hammer 3MP

Hosokawa Mill Hammer 3MP

  • Manufacturer: Hosokawa
  • Model Number: 3MP
  • Frain Number: 5H0301

Mikro Pulverizer, Model 3MP, hammer mill with carbon steel contact parts. Production rates per hour – depending on materials, application and machine configuration. Equipped with a 13" x 4" feed throat, (3) 2" diameter feed augers powered by a ¾ HP drive and (16) 13" wide swinging impact hammers powered by a 50 HP drive. Reduced product is collected in a 35" diameter x 32" deep conical hopper with a 12" diameter flanged discharge with 72" ground clearance. Mounted on heavy duty (6) leg base frame.

OAD: 80"L x 67"W x 147"H

Get a Free Quote Call: 630-629-9900
Photo of Hosokawa Mill Hammer MP 25 HP

Hosokawa Mill Hammer MP 25 HP

Thumbnail of Hosokawa Mill Hammer MP 25 HP Thumbnail of Hosokawa Mill Hammer MP 25 HP Thumbnail of Hosokawa Mill Hammer MP 25 HP Thumbnail of Hosokawa Mill Hammer MP 25 HP Thumbnail of Hosokawa Mill Hammer MP 25 HP Thumbnail of Hosokawa Mill Hammer MP 25 HP Thumbnail of Hosokawa Mill Hammer MP 25 HP Thumbnail of Hosokawa Mill Hammer MP 25 HP Thumbnail of Hosokawa Mill Hammer MP 25 HP

Hosokawa Mill Hammer MP 25 HP

  • Manufacturer: Hosokawa
  • Model Number: MP 25 HP
  • Frain Number: 5H0302

Mikro Pulverizer, hammer mill with carbon steel contact parts. Production rates per hour – depending on materials, application and machine configuration. Equipped with a 13" diameter x 6" deep feed hopper, (3) 1¾" diameter feed augers powered by a ¾ HP drive and (12) 6" wide swinging impact hammers powered by 25 Hp drive. Reduced product is discharge into a 24" diameter x 15" deep conical product hopper with a 10" diameter flanged discharge. Variable speed augers and mill.

OAD: 55"L x 55"W x 66"H

Get a Free Quote Call: 630-629-9900
Photo of Hosokawa Mill Hammer 1SH

Hosokawa Mill Hammer 1SH

Thumbnail of Hosokawa Mill Hammer 1SH Thumbnail of Hosokawa Mill Hammer 1SH Thumbnail of Hosokawa Mill Hammer 1SH Thumbnail of Hosokawa Mill Hammer 1SH Thumbnail of Hosokawa Mill Hammer 1SH

Hosokawa Mill Hammer 1SH

  • Manufacturer: Hosokawa
  • Model Number: 1SH
  • Frain Number: 5H0741

Mikro Pulverizer, Model 1SH, hammer mill with 316 stainless steel contact parts. Production rates per hour – depending on materials, application and machine configuration. Equipped with a 12" wide x 13" long x 9" deep feed hopper, 1½" diameter feed auger powered by a 1/3 HP drive and (6) 3¼" wide swinging blunt impact hammers powered by a 5 HP drive. Product discharge is 16” long x 11” wide with 36” floor clearance. Mounted on a (4) leg painted base frame with a 3" diameter port for use with a dust collector and casters. Used to grind, de-lump, pulverize and process wet / dry products.

OAD: 43"L x 32"W x 57"H

Get a Free Quote Call: 630-629-9900
Photo of Fitzmill Mill Hammer DAS06

Fitzmill Mill Hammer DAS06

Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06

Fitzmill Mill Hammer DAS06

  • Manufacturer: Fitzmill
  • Model Number: DAS06
  • Frain Number: R27670

Fitzmill, Model DASO6, stainless steel hammer mill. Equipped with a 28" long x 20" wide x 4" deep feed pan, 6" wide x 4" high feed throat, 11” long x 6” wide blade chamber and (16) fixed knife / impact blades powered by a 7½ Hp motor drive. Product discharge is 15½” long x 5¾” wide with 36” floor clearance. Start / stop controls, mounted on casters.
Production rates dependant on materials, application and machine configuration.
OAD: 48"L x 35"W x 64"H

Get a Free Quote Call: 630-629-9900
Photo of Fitzmill Mill Hammer JT

Fitzmill Mill Hammer JT

Thumbnail of Fitzmill Mill Hammer JT Thumbnail of Fitzmill Mill Hammer JT Thumbnail of Fitzmill Mill Hammer JT Thumbnail of Fitzmill Mill Hammer JT Thumbnail of Fitzmill Mill Hammer JT Thumbnail of Fitzmill Mill Hammer JT Thumbnail of Fitzmill Mill Hammer JT Thumbnail of Fitzmill Mill Hammer JT Thumbnail of Fitzmill Mill Hammer JT

Fitzmill Mill Hammer JT

  • Manufacturer: Fitzmill
  • Model Number: JT
  • Frain Number: 5G7894

Fitzpatrick, Model JT, 304 stainless steel homoloid mill. with production rates per minute – depending on materials and application. Equipped with12" ID x 6" deep feed pan with 3" diameter product port, (12) fixed impact blades with screen area of 2½" wide x 16" long and 8" long x 2½" wide bottom product discharge with 24” ground clearance. Start, stop push button controls and mounted on a base with casters.

OAD: 38"L x 35"W x 53"H

Get a Free Quote Call: 630-629-9900
1 … 7 8 9 10