Mill Machines

Quadro Mill Hammer 198

• Manufacturer: Quadro
• Model Number: 198
• Frain Number: R31080

Quadro Model 198 Comil, stainless steel, large volume production, reduction mill rated from 7,000 to 16,000 lbs of product per hour – depending on materials, application and screen. Equipped with 10" OD stainless steel product port with 20 Hp motor drive, 1185 rpm and top belt to sprocket drive with 51" x 32" top bolt down lift off safety cover. Bottom bolt discharge hopper with side scrape product impeller and 12" OD discharge port with 20" floor clearance. Control panel with start and stop push button controls and safety disconnects. Mounted on (4) stainless steel legs with casters. Used for dry milling, controlled grinding, dry mixing / dispersion, deagglomeration and wet material reduction in food, pharmaceutical, cosmetic, fine chemical and other related processes

OAD: 69" L x 48" W x 52" H

Fitzmill Mill Hammer DAS06

• Manufacturer: Fitzmill
• Model Number: DAS06
• Frain Number: R31100

Fitzmill, Model DASO6, stainless steel hammer mill with production rates per hour – depending on materials, application and machine configuration. Equipped with 18" long x 18" wide x 18" deep hopper, 3" diameter feed auger powered by a ¾ hp drive with variable speed gearbox and (16) fixed knife/impact blades powered by 10 Hp motor drive. Product discharge is 16” long x 6” wide with 33” floor clearance. Control panel with push button start / stop controls. Mounted on a stainless steel frame with casters.

OAD: 50"L x 42"W x 64"H

Fitzmill Mill Hammer VFSD6A

• Manufacturer: Fitzmill
• Model Number: VFSD6A
• Frain Number: R31130

Fitzmill, Model D6A, compact, on-wall design, 316 stainless steel construction, hammer mill with production rates per hour – depending on materials and application. Equipped with 12" long x 12" wide x 12" deep stainless steel product feed hopper 3" OD stainless steel vari speed metering feed screw to enclosed process chamber with (16) fixed stainless steel knife / impact blades and 4"diameter product discharge port. Control panel has speed adjust dials and start, stop buttons for mill and feed screw.
The in-wall and on-wall configurations of the VFS-D6A are designed to contain the drive motors in a separate room or technical area. This leaves only a
few easily disassembled product contact parts in the process area.

OAD: 48"L x 32"W x 52"H

Fitzmill Mill Hammer DAS06

• Manufacturer: Fitzmill
• Model Number: DAS06
• Frain Number: R31050

Fitzmill, Model DAS06, stainless steel hammer mill with pounds of product per hour – depending on materials and application. Equipped with 20" wide x 20" long x 4" deep feed pan, (16) fixed knife / impact blades and 15" x 5" discharge with 36" of ground clearance. Mounted on (4) leg stainless steel frame with casters.

OAD: 48"L x 34"W x 62"H

Fitzmill Mill Hammer FAS020

• Manufacturer: Fitzmill
• Model Number: FAS020
• Frain Number: R31030

Fitzmill, Model FASO20, stainless steel hammer mill with pounds of product per hour – depending on materials and application. Equipped with 14" wide x 31" long x 16" deep hopper with a 30" wide x 14" high charge, (48) fixed knife / knife blades powered by a 50 HP drive and 18" x 18" discharge with 29" of ground clearance. Mounted on (4) leg stainless steel frame.

OAD: 87"L x 40"W x 86"H

Fitzmill Mill Hammer JT

• Manufacturer: Fitzmill
• Model Number: JT
• Frain Number: R30840

Fitzpatrick, Model JT, 316 stainless steel homoloid mill. with production rates per minute – depending on materials and application. Equipped with 12" ID x 3" deep 304 stainless steel feed pan with 2.75" ID product port, (12) swinging knife / impact blades with screen area of 2" wide x 16" long and 8" long x 2" wide bottom product discharge with 35” ground clearance. Push button start /stop controls and mounted on a base with locking casters.

OAD: 35"L x 32"W x 52"H

Simpson Technologies Inc Mill Roller (Mill) 0C

• Manufacturer: Simpson Technologies Inc
• Model Number: 0C
• Frain Number: 5A1780

Simpson, Model No. 0, Style C, 3 ft³, heavy duty, carbon steel, batch mix-muller mixer. Rated to 150 lb batches at a time with pounds per hour – depending on materials and application. Equipped with 36" diameter x 16" deep mixing bowl, with 20" diameter x 8" wide roller mill wheel, 2" diameter feed pipe and 12" x 5" bottom discharge with 36" ground clearance. Powered by 5 Hp motor drive. Ideal for combined pressure and agitation to break down and coat components for a homoginized end product. Mounted on (4) leg heavy duty frame.

OAD: 60" L x 48"W x 64"H

Fitzmill Mill Hammer D6A

• Manufacturer: Fitzmill
• Model Number: D6A
• Frain Number: R29610

Fitzmill, Model D6A, compact, enclosed GMP sanitary design, 316 stainless steel construction, pharmacutical hammer mill. Equipped with 12" long x 12" wide x 10" deep stainless steel product feed hopper with safety grid and 16" long x 3" OD stainless steel vari speed metering feed auger, enclosed process chamber with (16) fixed stainless steel knife / blount blades. and 13” long x 6” wide product discharge with 36” floor clearance. Control panel has speed adjust dials and start, stop buttons for mill and feed screw with feed screw rpm and machine amp readouts with e-stops. Mounted on locking casters. Rates / Volumes dependant on materials, application and machine configuration.

OAD: 54" L x 53" W x 64" H

Buhler-Maig Mill Roller (Mill) 6 X 11¾

• Manufacturer: Buhler-Maig
• Model Number: 6 X 11¾
• Frain Number: R30090

Buhler-Maig, Model 6 x 11¾, 3-Roll mill with volumes of product per hour – depending on materials and application. Equipped with (3) 6" in diameter x 11¾" long rollers powered by 3 Hp motor drive, with hand crank gap adjustment, scraper blades and 11¾" long working roll area. All (3) rolls made of hardened steel. Roller cooling with 2"OD / ¾"ID Tri-clamp inlet port for cooling medium and ¾" NPT outlet. Control panel has push button start, stop and e-stop. Mounted on heavy duty base frame with casters.

OAD: 36"L x 32"W x 48"H

Micron Powder Systems Mill Hammer BANTAM

• Manufacturer: Micron Powder Systems
• Model Number: BANTAM
• Frain Number: R30059

Micron model Bantam, stainless steel hammer mill. Equipped with product hopper and 1" feed auger to meter material into hammer chamber. Rates dependant on materials, application and machine configuration.

OAD: 36" L x 32" W x 44" H

Stainless Steel contact parts, 14000 max RPM speed and rotor driven by a 1HP (3/60/208-230/460V) motor . Single stainless steel screw feed, prewired stainless steel control station for main motor and screw feed motor. Portable.

Quadro Mill Colloid 197

• Manufacturer: Quadro
• Model Number: 197
• Frain Number: 5H3950

Quadro Model 197, 316 stainless steel particle size reduction Comil. Rated from 360 to 800 lbs of product per hour – depending on materials and application. Equipped with 10" diameter x 6" deep stainless steel product hopper, 3" diameter feed throat, 5" diameter screen and 6" diameter discharge port with 26" ground clearance. Mounted on stainless steel (4) leg base frame. Discharge manifold with 5" OD connection for dust collection.

OAD: 35"L x 30"W x 43"H

Fitzmill Mill Hammer DAS06

• Manufacturer: Fitzmill
• Model Number: DAS06
• Frain Number: 5G7400

Fitzmill, Model D, stainless steel hammer mill. Equipped with 12" long x 12" wide x 12" deep (½ ft³) product hopper, 3" diameter feed screw with 2" centers powered by ¼ HP drive with variable speed gearbox and (16) 3½" long x 1" wide fixed knife / impact blades. Product discharge is 15”L x 5½” W with 36" of ground clearance. Mounted on (4) leg mild steel frame with casters.

OAD: 55"L x 42" W x 64"H