Mill Machines

Used Mill Equipment

There are many different names that are used to describe particle size reduction: milling, grinding, granulating, comminuting, etc. Milling systems can size reduce wet or dry powders. Their are variable speed drives that permit low speed screening and high speed impacting with one milling system. A typical milling system consists of an inlet chamber with a rotor screen and an outlet. The particle size depends upon the speed of the rotor, rotor type, screen hole size and the feed rate of the product. High shear granulation turns powders into dense granules for tableting or coating. Powders are added to a mixing bowl. A large impeller spins the powders into a vortex. A chopper tool shears the granules and removes the air. The granulated product is dried in the mixing bowl or fluid bed dryer.
Contact Us

Related Categories

Mill Equipment In Stock

Photo of Fitzmill Mill Hammer DKAS012

Fitzmill Mill Hammer DKAS012

Thumbnail of Fitzmill Mill Hammer DKAS012 Thumbnail of Fitzmill Mill Hammer DKAS012 Thumbnail of Fitzmill Mill Hammer DKAS012 Thumbnail of Fitzmill Mill Hammer DKAS012

Fitzmill Mill Hammer DKAS012

  • Manufacturer: Fitzmill
  • Model Number: DKAS012
  • Frain Number: 5H2670

Fitzmill, Model DKAS012, hammer mill with stainless steel contact parts. Production rates per hour – depending on materials, application and machine configuration. Equipped with an 8" diameter charge port and (32) 1½" wide by 3" long fixed knife blades powered by a 15 hp drive. 11"OD / 8"ID flanged product discharge with 12” floor clearance. Mounted on a (4) leg painted base frame. Used to grind, de-lump, pulverize and process wet / dry products.

OAD: 45"L x 36"W x 55"H

Get a Free Quote Call: 630-629-9900
Photo of Hosokawa Mill Hammer 3MP

Hosokawa Mill Hammer 3MP

Thumbnail of Hosokawa Mill Hammer 3MP Thumbnail of Hosokawa Mill Hammer 3MP Thumbnail of Hosokawa Mill Hammer 3MP Thumbnail of Hosokawa Mill Hammer 3MP

Hosokawa Mill Hammer 3MP

  • Manufacturer: Hosokawa
  • Model Number: 3MP
  • Frain Number: 5H0301

Mikro Pulverizer, Model 3MP, hammer mill with carbon steel contact parts. Production rates per hour – depending on materials, application and machine configuration. Equipped with a 13" x 4" feed throat, (3) 2" diameter feed augers powered by a ¾ HP drive and (16) 13" wide swinging impact hammers powered by a 50 HP drive. Reduced product is collected in a 35" diameter x 32" deep conical hopper with a 12" diameter flanged discharge with 72" ground clearance. Mounted on heavy duty (6) leg base frame.

OAD: 80"L x 67"W x 147"H

Get a Free Quote Call: 630-629-9900
Photo of Hosokawa Mill Hammer MP 25 HP

Hosokawa Mill Hammer MP 25 HP

Thumbnail of Hosokawa Mill Hammer MP 25 HP Thumbnail of Hosokawa Mill Hammer MP 25 HP Thumbnail of Hosokawa Mill Hammer MP 25 HP Thumbnail of Hosokawa Mill Hammer MP 25 HP Thumbnail of Hosokawa Mill Hammer MP 25 HP Thumbnail of Hosokawa Mill Hammer MP 25 HP Thumbnail of Hosokawa Mill Hammer MP 25 HP Thumbnail of Hosokawa Mill Hammer MP 25 HP Thumbnail of Hosokawa Mill Hammer MP 25 HP

Hosokawa Mill Hammer MP 25 HP

  • Manufacturer: Hosokawa
  • Model Number: MP 25 HP
  • Frain Number: 5H0302

Mikro Pulverizer, hammer mill with carbon steel contact parts. Production rates per hour – depending on materials, application and machine configuration. Equipped with a 13" diameter x 6" deep feed hopper, (3) 1¾" diameter feed augers powered by a ¾ HP drive and (12) 6" wide swinging impact hammers powered by 25 Hp drive. Reduced product is discharge into a 24" diameter x 15" deep conical product hopper with a 10" diameter flanged discharge. Variable speed augers and mill.

OAD: 55"L x 55"W x 66"H

Get a Free Quote Call: 630-629-9900
Photo of Ross Mill Roller (Mill) TRM

Ross Mill Roller (Mill) TRM

Thumbnail of Ross Mill Roller (Mill) TRM Thumbnail of Ross Mill Roller (Mill) TRM Thumbnail of Ross Mill Roller (Mill) TRM Thumbnail of Ross Mill Roller (Mill) TRM

Ross Mill Roller (Mill) TRM

  • Manufacturer: Ross
  • Model Number: TRM
  • Frain Number: 5G9745

Ross, Model 4 x 8 TRM, 3-Roll mill with volumes of product per hour – depending on materials and application. Equipped with (3) 4" in diameter x 8" long rollers powered by 1 Hp motor drive, with hand crank gap adjustment, scraper blades and 8" long working roll area. All (3) rolls made of hardened steel. Roller cooling with ¼" NPT inlet port for cooling medium and ¾" NPT outlet. Control panel has push button start, stop and e-stop chain. Mounted on heavy duty base frame.

OAD: 40"L x 28"W x 51"H

Get a Free Quote Call: 630-629-9900
Photo of Greerco Mill Colloid W500V

Greerco Mill Colloid W500V

Thumbnail of Greerco Mill Colloid W500V Thumbnail of Greerco Mill Colloid W500V Thumbnail of Greerco Mill Colloid W500V Thumbnail of Greerco Mill Colloid W500V

Greerco Mill Colloid W500V

  • Manufacturer: Greerco
  • Model Number: W500V
  • Frain Number: 5G9737

Greeco, Model W500V, colloid mill. Capable of complete dispersion and deagglomeration of liquids in liquids or solids in liquids at rates from 100 to 300 gallons per hour – depending on materials, application and machine configuration. Equipped with 20" diameter x 20" deep (20 gallon capacity) stainless steel hopper and 1" diamter discharge with 44" ground clearance. Rotor powered by a 10 hp drive and mounted on a push cart base.

OAD: 30"L x 20"W x 71"H

Get a Free Quote Call: 630-629-9900
Photo of Hosokawa Mill Hammer 1SH

Hosokawa Mill Hammer 1SH

Thumbnail of Hosokawa Mill Hammer 1SH Thumbnail of Hosokawa Mill Hammer 1SH Thumbnail of Hosokawa Mill Hammer 1SH Thumbnail of Hosokawa Mill Hammer 1SH Thumbnail of Hosokawa Mill Hammer 1SH

Hosokawa Mill Hammer 1SH

  • Manufacturer: Hosokawa
  • Model Number: 1SH
  • Frain Number: 5H0741

Mikro Pulverizer, Model 1SH, hammer mill with 316 stainless steel contact parts. Production rates per hour – depending on materials, application and machine configuration. Equipped with a 12" wide x 13" long x 9" deep feed hopper, 1½" diameter feed auger powered by a 1/3 HP drive and (6) 3¼" wide swinging blunt impact hammers powered by a 5 HP drive. Product discharge is 16” long x 11” wide with 36” floor clearance. Mounted on a (4) leg painted base frame with a 3" diameter port for use with a dust collector and casters. Used to grind, de-lump, pulverize and process wet / dry products.

OAD: 43"L x 32"W x 57"H

Get a Free Quote Call: 630-629-9900
Photo of Fitzmill Mill Hammer DAS06

Fitzmill Mill Hammer DAS06

Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06

Fitzmill Mill Hammer DAS06

  • Manufacturer: Fitzmill
  • Model Number: DAS06
  • Frain Number: R27670

Fitzmill, Model DASO6, stainless steel hammer mill. Equipped with a 28" long x 20" wide x 4" deep feed pan, 6" wide x 4" high feed throat, 11” long x 6” wide blade chamber and (16) fixed knife / impact blades powered by a 7½ Hp motor drive. Product discharge is 15½” long x 5¾” wide with 36” floor clearance. Start / stop controls, mounted on casters.
Production rates dependant on materials, application and machine configuration.
OAD: 48"L x 35"W x 64"H

Get a Free Quote Call: 630-629-9900
Photo of California Pellet Mill Mill Pellet CL

California Pellet Mill Mill Pellet CL

Thumbnail of California Pellet Mill Mill Pellet CL Thumbnail of California Pellet Mill Mill Pellet CL Thumbnail of California Pellet Mill Mill Pellet CL Thumbnail of California Pellet Mill Mill Pellet CL

California Pellet Mill Mill Pellet CL

California Pellet Mill, Model CL, Laboratory size pellet Mill. Rated from 30 to 200 pounds of pellets per hour – depending on materials, application and machine configuration. Equipped with 17" long x 13" wide x 17" deep product hopper, 4" wide x 20" long vibratory feeder, 36" long x 4" OD continuous paddle mixer and conditioner powered by ¾ hp drive, 7" long x 1½" OD auger feeder powered by (1/3) hp drive and pellet mill housing powered by 2 hp drive with 5" OD die and 5" wide discharge chute with 15" ground clearance. Control panel with push button start / stop for mill, auger and mixer. On / off switch and variable speed dial for vibratory feeder. System mounted on a painted base frame with casters.

OAD: 60"L x 35"W x 86"H

Get a Free Quote Call: 630-629-9900
Photo of Fitzmill Mill Hammer JT

Fitzmill Mill Hammer JT

Thumbnail of Fitzmill Mill Hammer JT Thumbnail of Fitzmill Mill Hammer JT Thumbnail of Fitzmill Mill Hammer JT Thumbnail of Fitzmill Mill Hammer JT Thumbnail of Fitzmill Mill Hammer JT Thumbnail of Fitzmill Mill Hammer JT Thumbnail of Fitzmill Mill Hammer JT Thumbnail of Fitzmill Mill Hammer JT Thumbnail of Fitzmill Mill Hammer JT

Fitzmill Mill Hammer JT

  • Manufacturer: Fitzmill
  • Model Number: JT
  • Frain Number: 5G7894

Fitzpatrick, Model JT, 304 stainless steel homoloid mill. with production rates per minute – depending on materials and application. Equipped with12" ID x 6" deep feed pan with 3" diameter product port, (12) fixed impact blades with screen area of 2½" wide x 16" long and 8" long x 2½" wide bottom product discharge with 24” ground clearance. Start, stop push button controls and mounted on a base with casters.

OAD: 38"L x 35"W x 53"H

Get a Free Quote Call: 630-629-9900
Photo of Fitzmill Mill Hammer DAS06

Fitzmill Mill Hammer DAS06

Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06 Thumbnail of Fitzmill Mill Hammer DAS06

Fitzmill Mill Hammer DAS06

  • Manufacturer: Fitzmill
  • Model Number: DAS06
  • Frain Number: 5G7220

Fitzmill, Model U, stainless steel hammer mill. Equipped with a 12" L x 12" W x 12" D (½ ft³) product hopper, 3" diameter feed screw with 1½" centers powered by a ¼ HP drive with variable speed gearbox and (16) 4" L x 1" W fixed impact blades powered by a 7½ HP drive with variable speed gearbox. Product discharge is 15”L x 5½” W with 38" of ground clearance. Unit mounted on mild steel frame with casters.

OAD: 80"L x 40" W x 70"H

Get a Free Quote Call: 630-629-9900
Photo of Fitzmill Mill Hammer JT6

Fitzmill Mill Hammer JT6

Thumbnail of Fitzmill Mill Hammer JT6 Thumbnail of Fitzmill Mill Hammer JT6 Thumbnail of Fitzmill Mill Hammer JT6 Thumbnail of Fitzmill Mill Hammer JT6 Thumbnail of Fitzmill Mill Hammer JT6

Fitzmill Mill Hammer JT6

  • Manufacturer: Fitzmill
  • Model Number: JT6
  • Frain Number: R27050

Stainless steel, homoloid mill. Production rates dependent on materials and application. Equipped with a 12" ID x 3" Deep stainless steel feed pan with 3" OD product port, a 6" throat, bolt down safety cover, 12 swinging knife impact blades with a screen area of 2" wide x 16" long and a 8" long x 2" wide bottom product discharge with 37” floor clearance. Start, stop and reset buttons with e-stop.

OAD: 60" L x 34" W x 44" H

Get a Free Quote Call: 630-629-9900
Photo of Quadro Mill Hammer 196

Quadro Mill Hammer 196

Thumbnail of Quadro Mill Hammer 196 Thumbnail of Quadro Mill Hammer 196 Thumbnail of Quadro Mill Hammer 196 Thumbnail of Quadro Mill Hammer 196 Thumbnail of Quadro Mill Hammer 196 Thumbnail of Quadro Mill Hammer 196 Thumbnail of Quadro Mill Hammer 196 Thumbnail of Quadro Mill Hammer 196 Thumbnail of Quadro Mill Hammer 196

Quadro Mill Hammer 196

  • Manufacturer: Quadro
  • Model Number: 196
  • Frain Number: R27030

Quadro Model 196, 316 stainless steel particle size reduction Comil. Rated from 3,600 to 8,000 lbs of product per hour – depending on materials and application. Equipped with a ¾ cubic foot stainless steel product hopper, 12" diameter screen and 14" diameter discharge port with 10" ground clearance. Includes an AC variable speed control with an output rpm of 450 – 2700. Mounted on stainless steel (4) leg base frame.

OAD: 55"L x 28"W x 47"H

Get a Free Quote Call: 630-629-9900
1 … 11 12 13 14