Mixers - Paste Mixing Machines

Used Mixers - Paste Mixing Equipment

Frain Industries carries several types of mixers covering numerous process stages including comminution, mixing, drying, agglomeration, classification, weighing, and metering.  Additionally, mills are capable of aeration, deaeration, emulsification, general pre-milling, processing, homogenization, particle size reduction, paste mixing, vacuum mixing, and whipping.

The Frain engineering team can design a paste mixing solution based on your final product, volume, and integration requirements.  Contact us today to discuss you paste mixing needs.

  • horizontal_thumbHorizontal Mixers / Blenders – Frain Industries carries several styles of industrial horizontal mixers with different types of agitation depending on your application. Roller bar agitator, single sigma blade agitator, and dual sigma blade agitator are some of the styles Frain carries.  Additional features such as jacketed mixing bowl, tilt discharge, dual end drive, and sliding gate discharges are also available.  Horizontal mixers are ideal for mixing a number of products including: breads, creams, dough, icing, marshmallow, pasta, pizza crust, pretzels, pastry dough, pet foods, stiff fillings, as well as many other products.


  • Ddouble arm_thumbouble Arm Mixers –   Primarily used in pasta and bread bakeries, double arm mixers produce soft doughs such as French bread, confectionery, sandwich bread, bread sticks, etc. These style mixers mix at high speed, and oxygenate the dough without heating it.



  • disperser_thumbDisperser Mixers –   Designed to incorporate powders into liquid and break down particle agglomerates to produce a fine dispersion.  There are different types of blade designs depending on your application including saw-tooth, high vane, cutter, and polypeller.




ET Oakes_thumb

  • Continuous Mixers – Ideal where a single product is mixed in large quantities.  The weighing, loading, mixing, and discharge steps take place simultaneously.





high sheer_thumb

  • High Shear Mixers – Applications include high speed particle size reduction, homogenization, emulsification, and solids size reduction.





Three Roll Mill

  • Three Roll Mills – Dispersion is achieved by the shear force generated between the rolls.






  • Planetary Mixers – Ideal for low shear mixing and kneading viscous pastes.





Frain Industries carries used paste mixers from many OEM’s including E.T. Oakes, Asser Oakes & Bollin Dale Engineering, Design Integrated Technology, Inc. (DIT), Kady® International, Ross, Cornell, Peerless Food Equipment, Votator, Reitz, Komline- Seider, Hosokawa Micron, Mars Mineral,  Aeration Mixer BM, FEECO, Scott Equipment Company, Readco, Munson, Process Control Corporation, Patterson-Kelley, and many others.

Contact Us

Mixers - Paste Mixing Equipment In Stock

Oakes Mixer Paste Horizontal 2MBTIA

  • Manufacturer: Oakes
  • Model Number: 2MBTIA
  • Frain Number: R30082

Oakes, Model 2MBTIA, jacketed, high shear continuous rotor and stator pin mill mixer and is rated from 10 to 120 lb of product per hour – depending on materials, application, environment and machine configuration. Equipped with 9½" OD x 20" deep (5 gallon) supply hopper, SPX Model R0 positive displacement feed pump powered by ½ Hp motor drive and 2" diameter mixing head with 1"OD / ¼" ID Tri-Clamp style center product discharge powered by 1 Hp motor drive. Control panel has touch pad variable speed and digital speed displays for pump and rotor.

OAD: 42"L x 25"W x 32"H

Get a Free Quote Call: 630-629-9900

Ross Mixer Paste Vertical CDA50 Ross 65 gallon paste mixer

  • Manufacturer: Ross
  • Model Number: CDA50
  • Frain Number: R30083

Ross Model CDA50 vertical jacketed mixer with gallons of product per hour – depending on materials and application. 304 stainless steel with 65 gallon total and 50 gallon working capacities. Equipped with full vacuum up to 29.50 Hg, jacketed pressure rated up to 100 psi. with variable high speed, independently driven, high speed hear homogenizing and scrape surface agitation. Has 3-1/4" sight port, temperature probe and 2" ball valve discharge and vacuum pump. Start, stop and e-stop push button controls.

OAD: 92" L x 36" W x 74" H

Get a Free Quote Call: 630-629-9900

Ross Mixer Paste Vertical LDM2

  • Manufacturer: Ross
  • Model Number: LDM2
  • Frain Number: R30084

Ross Model LDM2, 2 gallon, jacketed, double planetary mixer with orbital speeds from 20 to 100 rpm and pounds of product per hour – depending on materials and application. Equipped with 100 psi steam jacket and vacuum cover rated up to 29" Hg vacuum, model DS-2 hydraulic discharge press, (2) 3/4" ID threaded vacuum ports, vacuum gauge, (2) 3" inlets/sight glasses, safety switch, temperature probe and Sterling variable speed gear reducer. Mounted on base frame with casters.

OAD: 42" L x 22" W x 56" H

Get a Free Quote Call: 630-629-9900

Oakes Mixer Paste Horizontal 4MB3A

  • Manufacturer: Oakes
  • Model Number: 4MB3A
  • Frain Number: R30081

Oakes Model 4MB3A, lab model, continuous mixer, aerator rated from 150 lbs to 500 lbs per hour – depending on materials and application. Equipped with mixing head of two stators and a rotor, and is assembled with the stators surrounding the rotor. The rows of blades on the rotor are located between those on the stators, with no contact between moving and stationary elements. The mixing takes place between the teeth of the rotor and each of the two stators. Ingredients enter the head through the center of the rear stator, flow in a swirling path between the blades of the rotor and rear stator to the outer circumference of the stator cavity, then between the teeth of the front stator and rotor and out the center of the front stator. Product is discharged under pressure, it may be piped directly to the point of use thus eliminating any manual handling of the finished material. Air or other gas may be incorporated in the mixture and evenly distributed throughout the whole mass. The stator members are jacketed through which coolants may be circulated, thereby removing heat energy added as a result of the mixing action.
OAD: 3’L x 3’W x 5’H

Get a Free Quote Call: 630-629-9900

Ross Mixer Paste Vertical VB001

  • Manufacturer: Ross
  • Model Number: VB001
  • Frain Number: R30052

Ross, Model VB-001, 1 FT³, 304 stainless steel, low pressure jacketed, vacuum, vertical mixer. Vessel dimensions: 22" top diameter; 29" deep cone. Equipped with a clamp down cover, electric cone lift powered by a ½ hp drive, (1) 3¾"OD / 3"ID I-Line style charge port, (1) 2¾"ID sight glass, dual action nauta mixer with .33 hp arm drive / ½ hp screw drive and 2" NPT bottom discharge valve with 17" clearance (with cone in the up position). Control panel with independent push button start / stop and variable speed control dials for orbital arm and screw and a raise / off / lower switch for the lift. Mounted on a painted frame.

OAD: 53"L x 36"W x 80"H

Get a Free Quote Call: 630-629-9900

Paul O Abbe Mixer Paste Double Arm 5

  • Manufacturer: Paul O Abbe
  • Model Number: 5
  • Frain Number: R15672

20 gallon working capacity (40 gal over all capacity) Stainless steel double arm sigma mixer has a maximum working pressure and jacket rating of 14 psi. Trough measures 21" long x 23-1/2" deep x 25-3/4" wide. Includes hydraulic unit for tilt of bowl and stainless steel cover. Ideal for heavy viscosity products.

OAD: 94"L x 44"W x 54"H

Get a Free Quote Call: 630-629-9900

Littleford Mixer Paste Vertical W-10-B

  • Manufacturer: Littleford
  • Model Number: W-10-B
  • Frain Number: 5G9706

Littleford, Model W-10, high intensity ¼ ft³ working capacity lab mixer with number of pounds of product per hour – depending on materials and application. Equipped with stainless steel contact parts, jacketed bowl 9" diameter x 8½" deep,hinged top cover with spray nozzle, 2 tier blade, 1½" diameter outlet with manual plug valve and 41" ground clearance and driven by 3 hp motor. Control panel with push button start / stop and variable speed adjustment.

MAWP: 125 PSI @ 400°F

OAD: 35"L x 26"W x 62"H

Get a Free Quote Call: 630-629-9900

Peerless Mixer Paste Double Arm DBL ARM

  • Manufacturer: Peerless
  • Model Number: DBL ARM
  • Frain Number: 5C4872

110 gallon full capacity and 80 gallons working, 700 lb double-arm sigma mixer. Equipped with power tilt discharge, stainless steel contact parts and two-piece cover. Product hopper dimensions: 28” long x 42" wide x 31” deep.

OAD: 7’L x 5’W x 6’H

Get a Free Quote Call: 630-629-9900

Hobart Mixer Paste Cake V1401

  • Manufacturer: Hobart
  • Model Number: V1401
  • Frain Number: 5G8000

Hobart, Model V1401, dough mixer. Maximum capacity of 140 quarts with pounds of product per hour – depending on materials, application and operator dexterity. Equipped with 4-speed adjustable clutch, start / stop, timer dial, hydraulic bowl lift, beater bar aggitation and 140 quart bowl.

OAD: 48"L x 30"W x 70"H

Get a Free Quote Call: 630-629-9900

Baker Perkins / Confectionary Mixer Paste Double Arm ¾ GAL

Baker Perkins Model 0.1 ft³ (¾ gallon) working capacity, 304 stainless steel, double arm, sigma blade mixer with pounds of product per hour – depending on materials and application. Inner mixing chamber dimensions: 5½" in Length; 7¼" in Width; 7" in Depth. Equipped with stainless steel contact parts, bolt down cover, 1½ Hp motor drive, hand tilt with 15" fill height and 6" discharge height. Mounted on a painted steel base frame.

OAD: 31"L x 20"W x 16"H

Get a Free Quote Call: 630-629-9900

Oakes Mixer Paste Horizontal 8MV50

  • Manufacturer: Oakes
  • Model Number: 8MV50
  • Frain Number: 5G9630

Oakes, Model 8MV50, jackted high shear continuous rotor stator pin mill mixer with 316 stainless steel contact parts. Rated from 150 to 1000 lb per hour – depending on materials, application, environment and machine configuration. Equipped with Waukesha, Model 25, positive displacement feed pump with a 2"OD / 1½"ID seated bevel style inlet and a 8" diameter mixing head with 2"OD/1½"ID seated bevel style center product discharge with 30" ground clearance powered by a 50 hp drive. Mounted on painted base frame.

OAD: 97"L x 53"W x 60"H

Get a Free Quote Call: 630-629-9900

Stricklin Mixer Paste Horizontal 147

  • Manufacturer: Stricklin
  • Model Number: 147
  • Frain Number: 5G9610

Stricklin, Model 147, 130 ft³ total (100 ft³ working) capacity, 316 stainless steel, ½ dimple jacketed, single motion paddle mixer with pound of product per hour – depending on materials, application and machine configuration. Inner chamber dimensions: 96" in Length; 49" in Width; 53" in Depth. Equipped with 3½" OD shaft, (2) 50" long scrapper paddles powered by a 7½ hp drive, (1) 3½"OD / 3"ID Tri-Clamp style bottom discharge with 20" ground clearance and (1) 16" wide x 8" high end product discharge with a pneumatic flush gate and 23" ground clearance.

Jacket Ports:
(5) 1" NPT

MAWP: 150 PSI @ 300°F
MDMT: -20°F @ 150 PSI

OAD: 141"L x 58"W x 77"H

Get a Free Quote Call: 630-629-9900