Mixers - Paste Mixing Machines

Baker Perkins / B P Process Eq Mixer Paste Double Arm 10

• Manufacturer: Baker Perkins / B P Process Eq
• Model Number: 10
• Frain Number: 5D7412

100 gallon jacketed, C/S double sigma mixer. Internal mixing chamber dimensions: (26"L x 30"W x 22"Deep). Equipped with hinged flip top cover, hydraulic tilt, and 20 HP Allis Chalmers double end drive. Mounted on a mild steel base.

OAD: 88"(L) x 64"(W) x 58"(H)

Baker Perkins / B P Process Eq Mixer Paste Double Arm 15CUFT

• Manufacturer: Baker Perkins / B P Process Eq
• Model Number: 15CUFT
• Frain Number: 5D7410

Baker Perkins, 15 ft³, dual sigma jacketed mixer. Internal mixing chamber dimensions of 33" long x 38" wide x 30" deep for a working capacity of 75 gallons. Equipped with 5" wide dual sigma blades powered by a 40 Hp drive, hydraulic tilt discharge with a 27" discharge height. Mounted on a painted base frame.

Jacket Fittings:
(7) 3/8" NPT

OAD: 101"L x 78"W x 61"H

Cornell Mixer Paste Horizontal D26 Cornell Versator

• Manufacturer: Cornell
• Model Number: D26
• Frain Number: 5D7409

Cornell D26 versator. Equipped with 26" disc, quick release cover, two 4" diameter view ports, vacuum system, SIHI vacuum pump, filter, recirculation oil pump for bearings. Carbon steel contact parts. 2" ID inlet and outlet

OAD: 84"L x 76"W x 77"H

Optional: Cornel D8 to run your lab/R&D testing before running your full batch, borrow short term. Item number R20671 Cornel D8, self contained vacuum pump, filter, controls.

J H Day Mixer Paste Single Arm 30CUFT

• Manufacturer: J H Day
• Model Number: 30CUFT
• Frain Number: 5D8171

30 cuft. S/S single arm Naben blade mixer. Internal mixing chamber dimensions: (36"L x 38"W x 44"D). Has manual tilting mechanism, double end drive, and 32" dia. sigma blade. Equipped with E-Stop, 8HP Eurodrive motor, and Eurodrive variable speed gear reducer, mounted on heavy duty cast iron base.

OAD: 84"(L) x 46"(W) x 90"(H)

Komline-Sanderson Mixer Paste Horizontal B6D84

• Manufacturer: Komline-Sanderson
• Model Number: B6D84
• Frain Number: 5D7081

3 cu ft, 316 stainless steel, horizontal, mixer, dryer, heater, cooler with volumes per hour – depending on materials and application. Equipped with 96" Long x 12" Wide x 17" Deep mixing chamber with 4" OD x 96" Long dual counter rotating stainless steel hollow shafts with hollow intermeshing paddles. Full jacket and hollow shafts and paddles rated to 150psi @ 366 deg F, the hollow dual counter rotaing shafts and paddles are used for precise control of temperature, heat transfer, residence time, and high thermal efficiency. Heat transfer medium, of steam, oil, thermal fluid, water, or glycol is isolated from the process mass. 1-3/4" and 7" diameter sanitary top inlets, (2) 4-3/4" diameter top side inlets, 6" long x 6" wide end bottom discharge, e-stop, (4) removeable top mounted lexan panels and powered by 5 hp UL motor drive.

OAD: 162" L x 49" W x 36" H

FPEC Mixer Paste Horizontal 814

• Manufacturer: FPEC
• Model Number: 814
• Frain Number: 5D7009

80 cubic foot 304 S/S horiontal “U” shaped paste mixer with inner dimensions of 74″(L) x 43″(W) x 49″ deep. Unit has full bolt-on cover with (5) 3 3/4″ ID triclover ports, (2) 2 3/4″ ID triclover ports, (1) 1 3/4″ ID triclover port, and (2) 30″(L) x 15″(H) manway with grating and cover. Equipped with 3″ wide ribbon agitator turning at 24 rpm on a 6″ dia. shaft and a 10 1/2″ ID bolt-down flange side bottom discharge. Unit has brackets for mounting purposes and was last used in a food operation.

OAD: 118″(L) x 54″(W) x 85″(H)

Oakes Mixer Paste Horizontal 14MC10

• Manufacturer: Oakes
• Model Number: 14MC10
• Frain Number: 5D4045

Oakes stainless steel, continuous rotor stator pin mill mixer rated up to 4000 lb per hour – depending on materials, application and machines configuration. Equipped with 14" outside diameter mixing head and 2" outside diameter threaded center product port, 10 hp rotary motor and a 3/4 hp pump with a variable speed control. Unit is jacketed with MAWP: 60 PSI @ 100 Fahrenheit down to -20 deg. F @ 200 PSI. Mounted on (4) leg base.

Optional: Oakes 4MB3A Lab/ R&D mill available for short term testing before running your large batch on mill listed above. Item R202542.

OAD: 68" L x 42" W x 72" H

Hottman Mixer Paste Horizontal MJ4

• Manufacturer: Hottman
• Model Number: MJ4
• Frain Number: 5D3543

25 cuft (185 gal) carbon steel dual shaft single ribbon horizontal paste mixer with 72"L x 33"W x 18"depth jacketed mixing chamber with a running capacity of 24.75 cu ft (185 gal). Unit has 2 1/2" dia shaft with 2"L x 3/4"W ribbons. Unit has hand wheel controls for dumping or raising the tank to the disired position. Equipped with an 8" x 7" hand crank slide gate side bottom discharge with 31" clearance and a 1" dia drain. Includes 32"L x 28"W x 34"H recirculating pump. For mixing heavy, viscous masses and solids with liquids.

OAD: 118"L x 62"W x 78"H

Pasco Mixer Paste Horizontal 35 CU FT

• Manufacturer: Pasco
• Model Number: 35 CU FT
• Frain Number: 5D3275

45 Cubic Feet total and 35 cubic foot working capacity. 316 S/S, jacketed, double ribbon mixer. Equipped with: 48”L x 39 1/2"”W x 47”D mixing chamber, double mixing ribbon on 48"(1219mm)L x 2 3/4"(70mm) diameter shaft. Ribbon has (outer ribbon 1/4"(6mm) thickness and 2"(50mm)W ) (inner ribbon 1/4"(6mm) thickness and 2"(50mm) W ), 2 7/8"(72mm) bottom discharge with butterfly closure and 25”(635mm) ground clearance. 3/4"(20mm) bottom discharge(drain) 34"(863mm) ground clearance. Stainless steel contact parts. Equipped with Toledo load-cell with 1000lbs. max

OAD: 84"L x 48"W x 84"H

Pasco Mixer Paste Horizontal 35 CU FT

• Manufacturer: Pasco
• Model Number: 35 CU FT
• Frain Number: 5D3274

45 Cubic Feet total and 35 cubic foot working capacity, 316 S/S, double ribbon mixer. Equipped with: 48”L x 39 1/2"”W x 47”D chamber, double ribbon on 48"L x 3/4" diameter shaft. Ribbon has outer ribbon 1/4" thickness and 2" W inner ribbon 1/4" thickness and 2" W , 2 7/8" bottom discharge with butterfly closure and 25” ground clearance. 3/4" bottom discharge 34" ground clearance. Stainless steel contact parts.

OAD: 84"L x 48"W x 84"H

J H Day Mixer Paste Double Arm 20CUFT

• Manufacturer: J H Day
• Model Number: 20CUFT
• Frain Number: 5D3219

20 cu. ft. (150 gallon), Double arm, jacketed, sigma mixer with tangential blades. Chamber dimensions: 39"L x 33"W x 30"H. Features a 10" top intake, a hinged cover with a wire screen with 3" x 3" openings and a powered tilt discharge.

OAD: 92"L x 50"W x 80"H

Beken Mixer Paste Double Arm 17GAL

• Manufacturer: Beken
• Model Number: 17GAL
• Frain Number: 5D5131

2 cuft. (17 gal), 304 S/S, jacketed double arm mixer with masticator blades. Inside chamber dimensions: 16" x 16" x 15". Equipped with counterweighted cover, 2" OD threaded center bottom discharge, hydraulic bowl tilt, and 10 HP GE drive motor. Mounted on a heavy duty frame.

OAD: 82"(L) x 38"(W) x 58"(H)