See us at the PMCA Show in Lancaster, PA on 4/15
Home » Mixers - Paste Mixing » Page 5
Frain Industries carries several types of mixers covering numerous process stages including comminution, mixing, drying, agglomeration, classification, weighing, and metering. Additionally, mills are capable of aeration, deaeration, emulsification, general pre-milling, processing, homogenization, particle size reduction, paste mixing, vacuum mixing, and whipping.
The Frain engineering team can design a paste mixing solution based on your final product, volume, and integration requirements. Contact us today to discuss you paste mixing needs.
Frain Industries carries used paste mixers from many OEM’s including E.T. Oakes, Asser Oakes & Bollin Dale Engineering, Design Integrated Technology, Inc. (DIT), Kady® International, Ross, Cornell, Peerless Food Equipment, Votator, Reitz, Komline- Seider, Hosokawa Micron, Mars Mineral, Aeration Mixer BM, FEECO, Scott Equipment Company, Readco, Munson, Process Control Corporation, Patterson-Kelley, and many others.
Votator, Model CR-6, stainless steel jacketed paste mixer rated up to 65 cubic inches volume with gallons per minute – depending on materials, application and machine configuration. Continuous mixing, blending, dispersing and whipping. Equipped with 5½" OD rotor, 1½" OD / 1" ID seated bevel style inlet and 1½" OD / 1" ID seated bevel discharge with 21" ground clearance. Powered by 5 Hp motor drive with variable speed gearbox.
OAD: 40"L x 20"W x 28"H
Stokes, 1.3 ft³, 316 stainless steel single sigma mixer with pounds of product per hour – depending on materials and application. Chamber dimmensions: 15" in Length x 12" in Width x _15" in Depth with flip top cover, 2" OD center shaft with 1½" wide x ¾" thick single ribbons powered by a ¼ hp drive. Mounted on a push cart base with tilt discharge and 24" floor clearence.
OAD: 48"L x 30"W x 45"H
Cornell, Model D16, "Versator" with mechanical drive. Rated from 1 to 20 gallons of product per minute – depending on materials and application. Polished sanitary 316 stainless steel contact parts. Equipped with 16" ID product rotating disc, with (2) 2" OD / 1½" ID Tri-Clamp side chamber in feed and discharge product ports, (1) 2½" OD / 2" ID top vacuum port, pressure gauge and 2"OD / 1½"ID Tri-Clamp bottom drain. Swing open clamp down door has 4" OD sight port and 7½ Hp motor drive with variable speed gearbox for an output of 1313 to 3940 rpm.
Operation: Product flows thru film forming ring and then over the surface of rotating disc where the dispersion, deaeration or defoaming action occurs and removal of entrapped air, foam, or gas from liquids under high vacuum.
OAD: 58"L x 26"W x 40"H
Shaffer Model DA300HFS-60, enclosed frame, stainless steel double arm, overlapping sigma blade dough mixer with amount of product per hour – depending on materials and application. Equipped with 120° pneumatic tilt chamber, with double sigma mixing blades and has 12" flour gate, 16" x 26" ingredients door, (3) 2" & (1) 3" liquid inlets, 5" dust vent, refrigeration jacket, 60 Hp motor drive with safety guarding. Remote control panel has A/B CompactLogix controller with panelview and has start, stop and e-stop push buttons with an A/B Powerflex 755 vari-speed controller and mixer on / off switch.
Dough capacity: 2,100 lbs. (based on 50 lbs./ft³ final dough density).
Bowl volume: 38.9 ft³ working; 47.8 total.
Mixing chamber: 52" in length; 44" in Width; 50" in Depth.
OAD: 132" L x 72" W x 109" H
Peerless Model HS24FD, High speed, (3) roll bar dough mixer rated up to 2400 lbs or 1090 kgs of product per batch with total pounds of product per hour – depending on materials and application. Designed to BISSC standards with stainless steel exterior, bowl sheet, bowl ends, triple-roller bar, and jacketed for glycol with a maximum of 235 psi, the agitators and canopy are all stainless steel for sanitation purposes. Equipped with tilt style mixing bowl and has internal dimensions of: 56" in Length; 52" in Width; 54" in Depth. (3) 46" long x 3-1/2" OD Outer and (3) 46" long 2" OD solid inner stainless steel fabricated roller bars, with hydraulic tilt up to 120 Deg f, has forward and top pneumatic butterfly valve flour gate and (2) liquid inlets with flour dust vent and 125 Hp motor drive. Remote control panel has PLC controller with touch pad and panelview, power and mixer on, raise / lower bowl, mixer jog, mixer start, stop with e-stop push button controls. Mounted on heavy duty stainless steel bolt down frame. Ideal for mixing breads, rolls, buns, flour tortillas, croissants, bagels, pizza and english muffins.
OAD: 144" L x 60" W x 92" H
Oakes Model 2MBTIA, jacketed, high shear, continuous, lab size R & D, rotor and stator pin mill mixer rated from 10 to 120 lb of product per hour – depending on materials, application, environment and machine configuration. 316 stainless steel mixing head. Equipped with 9" diameter x 12" deep stainless steel supply hopper, APV R series positive displacement feed pump powered by ½ Hp motor drive and 2" diameter mixing head with 1"OD / ¼" ID Tri-Clamp style center product discharge powered by 1 Hp motor drive. Control panel has touch pad variable speed and digital speed displays for pump and rotor. Mounted on an aluminum base designed for cart or bench top use.
OAD: 30"L x 25"W x 32"H
Cornell Model D26 "Versator" rated from 5 to 125 gallons of product per minute – depending on materials and application. All stainless steel contact parts. Equipped with 26" ID product rotating disc, with (2) 2-1/2" OD / 2-1/4 ID side chamber in feed and discharge product ports, (1) 3-3/4" OD / 3-1/2" ID top vacuum port, with pressure gauge and 2" OD bottom drain. Swing open clamp down door has 7" OD, flanged front port with (6) 3/4" bolts on 2-3/4" centers and 3-3/4" OD sight port and 25 Hp belt to motor drive with cage style safety guarding. Mounted on 61" long x 40" wide painted platform style base frame.Operation: Product flows thru film forming ring, out and then over the surface of rotating disc where the dispersion, deaeration or defoaming action occurs.
OAD: 72" L x 67" W x 72" H
J H Day 2 Gal, dual sigma blade, jacketed mixer with 304 stainless steel contact parts. Mixing chamber dimensions: 9" long x 7" wide x 9½" deep. Equipped with a lift off cover, lift out safety grate, 2 hp drive and manual tilt handle. Mounted on casters.
Nat’l Brd: 1260MAWP: 125 psi @ 353°F
OAD: 55"L x 30"W x 60"H
Cornell Model D26 "Versator" rated from 5 to 125 gallons of product per minute – depending on materials and application. All stainless steel contact parts. Equipped with 26" ID product rotating disc, with (2) 2-1/2" OD / 2-1/4 ID side chamber in feed and discharge product ports, (1) 3-1/4" OD / 3" ID top vacuum port, with pressure gauge and 2" OD bottom drain. Swing open clamp down door has 7" OD, flanged front port with (6) 3/4" bolts on 3" centers and 3" OD sight port with 25 Hp belt to motor drive. Side mounted 40" High x 8" OD product tank with 14" x 14" x 24" conical product feed hopper system with independent motor drive. Control panel has main machine and vacuum on / off switches. System is mounted on 72" long x 70" wide platform style frame.Operation: Product flows thru film forming ring out and then over the surface of rotating disc where the dispersion, deaeration or defoaming action occurs.
OAD: 72" L x 70" W x 76" H
J H Day, 1 ft³ (7½ gallon) / 0.67 ft³ (5 gallon) working capacity, jacketed, double arm, sigma blade mixer. Inner mixing chamber dimensions: 15¾" in Length; 12" in Width; 10¾" in Depth. Equipped with 304 stainless steel contact parts, 3 Hp motor drive with variable speed gearbox, hand tilt with 28" discharge height and ½" NPT jacket connections.
MAWP: 80 PSI @ 324°FNat’l Brd: 515
OAD: 70"L x 28"W x 57"H
Oakes Model 2MBTIA, jacketed, high shear continuous, lab size R & D pin mill mixer rated from 10 to 120 lb of product per hour – depending on materials, application, environment and machine configuration. Equipped with 9½" OD x 20" deep (5 gallon) supply hopper, SPX Model R0 positive displacement feed pump powered by ½ Hp motor drive and 2" diameter mixing head with 1"OD / ¼" ID Tri-Clamp style center product discharge powered by 1 Hp motor drive. Control panel has touch pad variable speed and digital speed displays for pump and rotor.
OAD: 42"L x 25"W x 32"H
Ross Model CDA50 vertical jacketed mixer with gallons of product per hour – depending on materials and application. 304 stainless steel with 65 gallon total and 50 gallon working capacities. Equipped with full vacuum up to 29.50 Hg, jacketed pressure rated up to 100 psi. with variable high speed, independently driven, high speed hear homogenizing and scrape surface agitation. Has 3-1/4" sight port, temperature probe and 2" ball valve discharge and vacuum pump. Start, stop and e-stop push button controls.
OAD: 92" L x 36" W x 74" H
Sign up for our newsletter to receive the latest in packaging tips, case studies and more.