Mixers - Paste Mixing Machines

Cornell Mixer Paste Horizontal D16

• Manufacturer: Cornell
• Model Number: D16
• Frain Number: R32490

Cornell, Model D16, "Versator" with mechanical drive. Rated from 1 to 20 gallons of product per minute – depending on materials and application. Polished sanitary 316 stainless steel contact parts. Equipped with 16" ID product rotating disc, with (2) 2" OD / 1½" ID Tri-Clamp side chamber in feed and discharge product ports, (1) 2½" OD / 2" ID top vacuum port, pressure gauge and 2"OD / 1½"ID Tri-Clamp bottom drain. Swing open clamp down door has 4" OD sight port and 7½ Hp motor drive with variable speed gearbox for an output of 1313 to 3940 rpm.

Operation: Product flows thru film forming ring and then over the surface of rotating disc where the dispersion, deaeration or defoaming action occurs and removal of entrapped air, foam, or gas from liquids under high vacuum.

OAD: 58"L x 26"W x 40"H

Shaffer MFG / Bundy Mixer Paste Double Arm DA300HFS-60

• Manufacturer: Shaffer MFG / Bundy
• Model Number: DA300HFS-60
• Frain Number: R32240

Shaffer Model DA300HFS-60, enclosed frame, stainless steel double arm, overlapping sigma blade dough mixer with amount of product per hour – depending on materials and application. Equipped with 120° pneumatic tilt chamber, with double sigma mixing blades and has 12" flour gate, 16" x 26" ingredients door, (3) 2" & (1) 3" liquid inlets, 5" dust vent, refrigeration jacket, 60 Hp motor drive with safety guarding. Remote control panel has A/B CompactLogix controller with panelview and has start, stop and e-stop push buttons with an A/B Powerflex 755 vari-speed controller and mixer on / off switch.

Dough capacity: 2,100 lbs. (based on 50 lbs./ft³ final dough density).

Bowl volume: 38.9 ft³ working; 47.8 total.

Mixing chamber: 52" in length; 44" in Width; 50" in Depth.

OAD: 132" L x 72" W x 109" H

Peerless Mixer Paste Horizontal HS24FD

• Manufacturer: Peerless
• Model Number: HS24FD
• Frain Number: R31573

Peerless Model HS24FD, High speed, (3) roll bar dough mixer rated up to 2400 lbs or 1090 kgs of product per batch with total pounds of product per hour – depending on materials and application. Designed to BISSC standards with stainless steel exterior, bowl sheet, bowl ends, triple-roller bar, and jacketed for glycol with a maximum of 235 psi, the agitators and canopy are all stainless steel for sanitation purposes. Equipped with tilt style mixing bowl and has internal dimensions of: 56" in Length; 52" in Width; 54" in Depth. (3) 46" long x 3-1/2" OD Outer and (3) 46" long 2" OD solid inner stainless steel fabricated roller bars, with hydraulic tilt up to 120 Deg f, has forward and top pneumatic butterfly valve flour gate and (2) liquid inlets with flour dust vent and 125 Hp motor drive. Remote control panel has PLC controller with touch pad and panelview, power and mixer on, raise / lower bowl, mixer jog, mixer start, stop with e-stop push button controls. Mounted on heavy duty stainless steel bolt down frame. Ideal for mixing breads, rolls, buns, flour tortillas, croissants, bagels, pizza and english muffins.

OAD: 144" L x 60" W x 92" H

Oakes Mixer Paste Horizontal 2MBTIA

• Manufacturer: Oakes
• Model Number: 2MBTIA
• Frain Number: R32140

Oakes Model 2MBTIA, jacketed, high shear, continuous, lab size R & D, rotor and stator pin mill mixer rated from 10 to 120 lb of product per hour – depending on materials, application, environment and machine configuration. 316 stainless steel mixing head. Equipped with 9" diameter x 12" deep stainless steel supply hopper, APV R series positive displacement feed pump powered by ½ Hp motor drive and 2" diameter mixing head with 1"OD / ¼" ID Tri-Clamp style center product discharge powered by 1 Hp motor drive. Control panel has touch pad variable speed and digital speed displays for pump and rotor. Mounted on an aluminum base designed for cart or bench top use.

OAD: 30"L x 25"W x 32"H

Cornell Mixer Paste Horizontal D26

• Manufacturer: Cornell
• Model Number: D26
• Frain Number: R30660

Cornell Model D26 "Versator" rated from 5 to 125 gallons of product per minute – depending on materials and application. All stainless steel contact parts. Equipped with 26" ID product rotating disc, with (2) 2-1/2" OD / 2-1/4 ID side chamber in feed and discharge product ports, (1) 3-3/4" OD / 3-1/2" ID top vacuum port, with pressure gauge and 2" OD bottom drain. Swing open clamp down door has 7" OD, flanged front port with (6) 3/4" bolts on 2-3/4" centers and 3-3/4" OD sight port and 25 Hp belt to motor drive with cage style safety guarding. Mounted on 61" long x 40" wide painted platform style base frame.
Operation: Product flows thru film forming ring, out and then over the surface of rotating disc where the dispersion, deaeration or defoaming action occurs.

OAD: 72" L x 67" W x 72" H

J H Day Mixer Paste Double Arm 2 GAL

• Manufacturer: J H Day
• Model Number: 2 GAL
• Frain Number: 5H6102

J H Day 2 Gal, dual sigma blade, jacketed mixer with 304 stainless steel contact parts. Mixing chamber dimensions: 9" long x 7" wide x 9½" deep. Equipped with a lift off cover, lift out safety grate, 2 hp drive and manual tilt handle. Mounted on casters.

Nat’l Brd: 1260
MAWP: 125 psi @ 353°F

OAD: 55"L x 30"W x 60"H

Cornell Mixer Paste Horizontal D26

• Manufacturer: Cornell
• Model Number: D26
• Frain Number: R30663

Cornell Model D26 "Versator" rated from 5 to 125 gallons of product per minute – depending on materials and application. All stainless steel contact parts. Equipped with 26" ID product rotating disc, with (2) 2-1/2" OD / 2-1/4 ID side chamber in feed and discharge product ports, (1) 3-1/4" OD / 3" ID top vacuum port, with pressure gauge and 2" OD bottom drain. Swing open clamp down door has 7" OD, flanged front port with (6) 3/4" bolts on 3" centers and 3" OD sight port with 25 Hp belt to motor drive. Side mounted 40" High x 8" OD product tank with 14" x 14" x 24" conical product feed hopper system with independent motor drive. Control panel has main machine and vacuum on / off switches. System is mounted on 72" long x 70" wide platform style frame.
Operation: Product flows thru film forming ring out and then over the surface of rotating disc where the dispersion, deaeration or defoaming action occurs.

OAD: 72" L x 70" W x 76" H

J H Day Mixer Paste Double Arm 5 GAL

• Manufacturer: J H Day
• Model Number: 5 GAL
• Frain Number: 5H3879

J H Day, 1 ft³ (7½ gallon) / 0.67 ft³ (5 gallon) working capacity, jacketed, double arm, sigma blade mixer. Inner mixing chamber dimensions: 15¾" in Length; 12" in Width; 10¾" in Depth. Equipped with 304 stainless steel contact parts, 3 Hp motor drive with variable speed gearbox, hand tilt with 28" discharge height and ½" NPT jacket connections.

MAWP: 80 PSI @ 324°F
Nat’l Brd: 515

OAD: 70"L x 28"W x 57"H

Oakes Mixer Paste Horizontal 2MBTIA

• Manufacturer: Oakes
• Model Number: 2MBTIA
• Frain Number: R30082

Oakes Model 2MBTIA, jacketed, high shear continuous, lab size R & D pin mill mixer rated from 10 to 120 lb of product per hour – depending on materials, application, environment and machine configuration. Equipped with 9½" OD x 20" deep (5 gallon) supply hopper, SPX Model R0 positive displacement feed pump powered by ½ Hp motor drive and 2" diameter mixing head with 1"OD / ¼" ID Tri-Clamp style center product discharge powered by 1 Hp motor drive. Control panel has touch pad variable speed and digital speed displays for pump and rotor.

OAD: 42"L x 25"W x 32"H

Ross Mixer Paste Vertical CDA50 Ross 65 gallon paste mixer

• Manufacturer: Ross
• Model Number: CDA50
• Frain Number: R30083

Ross Model CDA50 vertical jacketed mixer with gallons of product per hour – depending on materials and application. 304 stainless steel with 65 gallon total and 50 gallon working capacities. Equipped with full vacuum up to 29.50 Hg, jacketed pressure rated up to 100 psi. with variable high speed, independently driven, high speed hear homogenizing and scrape surface agitation. Has 3-1/4" sight port, temperature probe and 2" ball valve discharge and vacuum pump. Start, stop and e-stop push button controls.

OAD: 92" L x 36" W x 74" H

Ross Mixer Paste Vertical LDM2

• Manufacturer: Ross
• Model Number: LDM2
• Frain Number: R30084

Ross Model LDM2, 2 gallon, jacketed, double planetary mixer with orbital speeds from 20 to 100 rpm and pounds of product per hour – depending on materials and application. Equipped with 100 psi steam jacket and vacuum cover rated up to 29" Hg vacuum, model DS-2 hydraulic discharge press, (2) 3/4" ID threaded vacuum ports, vacuum gauge, (2) 3" inlets/sight glasses, safety switch, temperature probe port and Sterling variable speed gear reducer. Mounted on base frame with casters.

OAD: 42" L x 22" W x 56" H

Oakes Mixer Paste Horizontal 4MB3A

• Manufacturer: Oakes
• Model Number: 4MB3A
• Frain Number: R30081

Oakes Model 4MB3A, lab model, continuous mixer, aerator rated from 25 lbs to 500 lbs per hour – depending on materials and application. Equipped with mixing head of two stators and a rotor, and is assembled with the stators surrounding the rotor. The rows of blades on the rotor are located between those on the stators, with no contact between moving and stationary elements. The mixing takes place between the teeth of the rotor and each of the two stators. Ingredients enter the head through the center of the rear stator, flow in a swirling path between the blades of the rotor and rear stator to the outer circumference of the stator cavity, then between the teeth of the front stator and rotor and out the center of the front stator. Product is discharged under pressure, it may be piped directly to the point of use thus eliminating any manual handling of the finished material. Air or other gas may be incorporated in the mixture and evenly distributed throughout the whole mass. The stator members are jacketed through which coolants may be circulated, thereby removing heat energy added as a result of the mixing action.
OAD: 3’L x 3’W x 5’H