Paste Machines

Paste Equipment In Stock

Raque Complete Line Paste PF/HS

  • Manufacturer: Raque
  • Model Number: PF/HS
  • Frain Number: 5E1770A

Raque, complete in line, tray filling, roll stock sealing line rated from 50 to 150 trays per minute – depending on materials and application. Line consists of Raque 4 hd, reciprocating pick-in-place, with 2 vacuum suction cups each head, 60" long x 36" wide empty tray magazine with 156" long x 6" wide tray conveyor and fixed tray pockets to Raque Model PF-2-4 filler with fill range 0.1oz to 62 oz with proper change parts, 36" long x 18" wide x 22" deep full dimple jacketed stainless steel product hopper with double sweep blade paddle, prop agitator and flip top cover with safety shut-off switch. (4) 3" ID x 6-1/2" long stainlesss steel air assist pistons, (4)1-1/2" OD frill nozzles set on 3" centers. filled trays, then conveyed to Raque HS2 dual lane, roll stock heat sealer capable of handling oven board, plastic and aluminum containers with 48" long x 12" wide dual lane in feed conveyor and (4) 6-3/8" long x 12" wide long dwell, high pressure, heat sealing heads each lane, with hot knife cut-off and 16" long film roll with 3" core has 18" wide maximum film width, and film scrap rewind, to 48" long x 12" wide lugged tray discharge conveyor on 7" centers with dual suction cup tray pick-off. Mounted on heavy duty base frames.

Get a Free Quote Call: 630-629-9900

MRM Elgin Complete Line Paste RPF-8

  • Manufacturer: MRM Elgin
  • Model Number: RPF-8
  • Frain Number: 5F8900A

Complete paste filling, capping and labeling line with number of containers per minute – depending on materials and application. Line consist of MRM Model RPF-8 (8) head L to R rotary piston filler with fill range up to 35oz with accuracies of +/- 1/4 of 1% depending on product. Container: up to 5" OD x 12" high, 108" long x 3-1/4" wide container conveyor, with worm screw to star wheel in feed, 30" OD turret, 7" x 6" container pedestals, (8) 4" ID x 7-1/2" pistons, 1/2" OD nozzles set on 8" centers, drip trough, bottom up fill, no container / no fill with Warren Rupp, dual chamber, stainless steel P/D diaphram pump. Resina Model S-30, single head chuck capper, cap size: 13mm to 70mm and containers: up to 6" OD x 2-3/4 to13" high with proper change parts, 102" long x 4-1/2" wide, stainless steel container conveyor, cap hopper with pin wheel sorter, cap chute, cap button and transfer shoe, double container grippers and single tighting chuck. Tronics Model 3S3 P/S front, back and wrap, labeler label size: 1" to 8-1/2" high x 12" long and can handle up to 8" OD containers with 120" long x 7-1/2" wide plastic Delrin product in feed conveyor , 60" long x 1" wide top hold down conveyor, spacing wheel, aligning chains for container squaring, dual label heads with 9" high peeler plates and 16" long x 6" high side wrap conveyor. All mounted on base frames with separate control panels.

Get a Free Quote Call: 630-629-9900