See us at PACK EXPO International in Chicago, IL Nov. 3-6
Home » Complete Line » Food
PSG Lee / PPI Ind, Complete, intermittent motion, weigh, fill and seal pre-made pouch system with number of pouches per minute – depending on materials and application. System consists of Ohlson, Model MHW-CW10, rotary combination, weigh scale system with strain gauge load cells has weight capacity range of: 10 to 3000 grams with accuracies of ± 1gram, stainless steel linear feed pan, (10) stainless steel feed buckets, (10) stainless steel weigh buckets and stainless steel collating discharge chute with feed bucket elevator. PSG Lee Model RP8-T/Z-24, automatic, intermittent motion, (8) station rotary, stainless steel, pre-made pouch filler and sealer. Pouch size range: 3.9" to 9.4" in Width; 13.8" in Length. Capable of handling various pouch styles flat and stand-up. Fill range: per product and application. 72" long (3) eagle belt automatic pre-made pouch magazine, recipecating suction cup pic-n-place with (8) pouch stations on a rotary disc, one station each for pouch placement, top zipper opener, bottom gusset opener, pouch top opener, fill station with product settler and no pouch / no fill, and has optional second fill station or gas flush or coupon inserter, 11" wide x 1-1/4" thick heated top seal bar with top water cooling bar and has 43" long x 11" wide neophreme discharge belt conveyor to inclined transfer conveyor with vari speed controls. Control panel has A/B CPU with PSG and Ohlson touch screen interface, with readout and statis light bar. Mounted on stainless steel mezzanine and has base frames with interlock safety guarding.
OAD: 130" L x 70" W x 70" H PSG Poucher ___" L x __" W x __" H Complete System
Raque Model 4580 series, complete stainless steel, intermittent motion, tray denesting, filling, topping, and roll stock heat sealing line with number trays per minute – depending on materials, application and line configuration. Line consists of Raque (3) head reciprocating suction cup tray denester with 120" long workable x 24" wide (3) lane plastic flexlink tray conveyor sections with 3-1/2" long x 3/4" high lugs set on 10-3/4" centers, with (2) Raque topping dispenser on 93" long x 24" wide workable lugged conveyor section both with no tray / no fill sensors. Filled trays, are then conveyed to Raque (3) lane, roll stock, heat seal, die-knife cut sealer with 28" long film rolls on 1-1/2" cores roll stock film mandrels with 20′ long x 24" wide tray conveyor and (3) 9-1/4" long x 8-1/4" wide pnuematic pressure, heat sealing heads with die-knife cut-off and film scrap rewind. Control panel has CPU controls and control panel with digital display, on / off seal head switch and start, stop, e-stop push button controls. All mounted on heavy duty stainless steel frames.
OAD: 828" L x 60" W x 82" H
Complete food processing line with stainless steel contact parts put together by Loos Machine and Automation. System starts with a wagon tote dumper that discharges into an inclined screw conveyor. The inclined screw meters the product into an Urschel, Model 1700, reduction mill. Complete line system controlled with an AB PLC.
OAD: 321"L x 86"W x 113"H
Raque Model 4500 series, complete, stainless steel, tray denesting, filling, roll stock and heat sealing line with number trays per minute – depending on materials, application and line configeration. Line consists of: Raque Model 4504 tray denester with dual 36" long x 6" OD empty tray roller magazines, (2) head reciprocating pick-n-place, 120" long x 32" wide dual lane tray conveyor with fixed 6" OD pockets set on 8" centers, to 156" long x 32" wide dual lane feed conveyor to Raque Model 1284-12-1, dual head piston filler with 19" long x 18" wide x 20" deep stainless steel product hopper with fill range per application and proper change parts, currently set with dual 6" long x 2-1/2" ID pistons set on 8" centers with Model 1148-45-1liquid depositor product feed pump. Filled trays, then conveyed by 118" long x 32" wide dual lane transfer conveyor to Raque Model 4503-1 dual lane, roll stock, heat sealer and die cutter with 108" long x 32" wide dual lane in feed conveyor with dual 6" OD fixed pockets, dual film mandrels with 19" long film roll on 4" core and 9" long x 6" wide pnuematic pressure, heat sealer and die cut-off each lane, film rewind and 48" long x 32" discharge conveyor. Control panels have CPU controllers with touch screen controls and start, stop, e-stop push button and statis light bar. Mounted on stainless steel base frames with height adjustable legs and interlock safety guarding.
OAD: 552" L x 84" W x 80" H
Sign up for our newsletter to receive the latest in packaging tips, case studies and more.