Bundler Machines

Used Bundler Equipment

Shrink bundlers are designed to wrap a single piece or bundle of product in heat shrinkable plastic film. Shrink bundlers are designed to form the plastic wrap around the product or bundle using two rolls or plastic film (with only one notable exception). Shrink bundlers create bundles or product that have open ends know as bulls-eyes on each side of the package. By using film that is much wider than the bundle on a shrink bundler, the size of the bulls-eye can be reduced. By using a film that is narrower than the bundle on a shrink bundler, the bundle of product is wrapped by a band of plastic.

Shrink bundlers take in product and pass the product bundle through a barrier of film that is created by heat sealing the film ends of two rolls of plastic film. As the bundle passes through the film barrier, the top roll of the film wraps around the top of the bundle and the bottom roll of the film wraps around the bottom of the bundle. After the container has passes the heat sealing station, the seal jaws on the shrink bundler come together again to seal the films together after the bundle and to separate the wrapped bundle from the remainder of the film. This action leaves a film barrier created by heat sealing the ends of the film together, which allows the next shrink bundle to pass through the film barrier. The shrink bundle then passes through a heat shrink tunnel to shrink the film around the bundle of product.

Contact Us

Bundler Equipment In Stock

Arpac Shrink Bundler 105-36TW

  • Manufacturer: Arpac
  • Model Number: 105-36TW
  • Frain Number: 5G7882

Arpac, Model 105-36TW, Inline, intermittent motion, shrink bundler and tunnel. Rated from 1 to 25 bundles per minute – depending on materials and application. Equipped with 27" wide x 45" long Intralox in feed conveyor, 27" wide x 24" long Intralox spacing conveyor, 36" wide film rolls, 37" wide seal jaws with 14¾" vertical travel, 30" wide x 20" long Intralox transfer conveyor to shrink tunnel. Single zone shrink tunnel has 36” wide x 19" high total aperture x 60" long with100" long x 37½" wide Intralox product conveyor and cooling fan. Control panel has AB controller, with touch pad controls and readout, start / stop / e-stop / manual seal push button controls and digital temperature controls for seal bar and tunnel. Mounted on heavy duty base frame.

OAD: 198"L x 66"W x 80"H

Get a Free Quote Call: 630-629-9900

Arpac Shrink Bundler 55GI-20CX

  • Manufacturer: Arpac
  • Model Number: 55GI-20CX
  • Frain Number: 5G8260

Arpac, Model 55GI-20CX, Inline, continuous motion, shrink bundler. Rated from 10 to 55 bundles per minute – depending on materials, application and machine configuration. Equipped with 13" wide x 27" long Intralox in feed conveyor, (2) 20" wide film roll holders with film splicing stations, 20" wide walking beam seal jaws with 11" vertical travel, 13" wide x 36" long Intralox transfer conveyor to shrink tunnel. 50" long single zone shrink tunnel has 20” wide x 16" high total aperture, 70" long x 20" wide Intralox product conveyor, cooling fan and roller side compression on discharge. Control panel with AB controller, touch pad controls with readout, start / stop / e-stop / manual seal push button controls and digital temperature controls for seal bar and tunnel. Mounted on heavy duty base frame.

OAD: 144"L x 55"W x 88"H

Get a Free Quote Call: 630-629-9900

Great Lakes Shrink Bundler 727-2BE

  • Manufacturer: Great Lakes
  • Model Number: 727-2BE
  • Frain Number: 5G8008

Great Lakes, Model 727-2BE, Band-O-Matic, semi automatic inline, shrink bundler rated from 5 to 10 bundles per minute – depending on materials, application and machine configuration. Equipped with 15" long by 43" wide product staging load area, 32" wide upper and lower powered film rollers , 27" wide seal jaws with 14½" of vertical travel and 24" wide discharge conveyor. Mounted on heavy duty frame. Film Specifications: up to 14" in diameter

Signature Packaging, Model 412511, single chamber shrink tunnel. Rated from 0 – 98 Feet per minute number of product – depending on materials and application. Chamber dimensions: 24" in Width; 12" in Height; 40" in Length. 53" long x 22" wide mesh conveyor belt with 34" in feed and discharge height. Variable temp and velocity controls. Mounted on casters with height adjustable locking legs.

OAD: 72" L x 48" W x 78" H (bundler)
OAD: 53"L x 35" W x 72" H (tunnel)

Get a Free Quote Call: 630-629-9900

Tampco Shrink Bundler FA36

  • Manufacturer: Tampco
  • Model Number: FA36
  • Frain Number: 5G7680

Tampco, Model FA36, automatic inline, stainless steel shrink bundler and tunnel system. Rated from 1 to 25 bundles per minute – depending materials, application and operator dexterity. Package size range: up to 36" in Width; 11" in Height. Equipped with a 30" wide x 35" long belted roller infeed conveyor, 37" wide upper and lower film rollers, 38" wide seal jaws with 12" of vertical travel and a 32" wide x 26" long belted roller discharge conveyor. Shrink tunnel with 38" in Width x 16" in Height total aperture x 72" in Length heat chamber, 96" long x 34½" wide mesh conveyor with a 31" infeed and discharge height. Digital temperature controls for seal and tunnel, push button start / stop and on / off switch.

OAD: 166"L x 52"W x 70"H

Get a Free Quote Call: 630-629-9900

Thiele Shrink Bundler FA27

  • Manufacturer: Thiele
  • Model Number: FA27
  • Frain Number: 5G4331

Thiele, Model FA27, inline dual lane shrink bundling system. Rated from 5 to 38 bundles per minute – depending on materials and application. Maximum product height: 12"; maximum film width: 27". Equipped with auto film feed, with 27" seal bar servo driven diverter and servo controlled mechanism. 27" wide x 104" long intralox feed thru conveyor, stainless steel shrink tunnel 29" wide x 16" high aperture with 25" wide x 78" long nylon thru belt conveyor with 36"discharge height. All stainless steel frame and enclosure with lexan doors and machine leveling screws and pads. Fully automated with AB PLC rack, digital temp controllers, servo and ac drives.

OAD: 212"L x 68"W x 92"H
(Check Notes)

Get a Free Quote Call: 630-629-9900

Arpac Shrink Bundler 10528TW

  • Manufacturer: Arpac
  • Model Number: 10528TW
  • Frain Number: 5G7280

Arpac, Model 105TW-28, Inline, intermittent motion, shrink bundler. Equipped with 70" Long x 20" Wide roller in feed conveyor, 28" Wide film rolls, 29" Wide seal jaws with 13" vertical travel, 25½" Wide x 13" Long transfer conveyor to shrink tunnel. 70" Long single zone shrink tunnel has 29” Wide x 18" High total aperture, 110" Long x 29" Wide product conveyor and cooling fan. Control panel with AB controller, touch pad controls with readout, start / stop / E-stop / manual seal push button controls. Mounted on heavy duty base frame. Speeds dependant on materials, application and machine configuration.

OAD: 205"L x 60"W x 76"H

Get a Free Quote Call: 630-629-9900

Arpac Shrink Bundler 11228

  • Manufacturer: Arpac
  • Model Number: 11228
  • Frain Number: 5G7340

Arpac, Model 112-28, automatic inline shrink bundler. Package size range: 7" to 24" in Width; 6" to 18" in Length; 4" to 9" in Height. Equipped with a 24" wide x 20" long in feed conveyor, 29" wide hot knife seal jaw with 9½" of vertical travel, 29" wide top and bottom film carriages and a 24" wide x 16" long discharge conveyor.
Dual zone tunnel dimensions: 26" Wide x 16" High total aperture; 83" in Length with 29" wide x 126" long product conveyor with end of tunnel cooling fan. Control panel has Arpac controller with Arpac touch pad controls and readout with heat seal and tunnel temperature controllers, start, stop, and e-stop push button controls with status light bar. Mounted on common base frame. Rate / Speed dependant on materials, application and machine configuration.

OAD: 176"L x 57"W x 93"H

Get a Free Quote Call: 630-629-9900

Arpac Shrink Bundler BPMP5341

  • Manufacturer: Arpac
  • Model Number: BPMP5341
  • Frain Number: 5G6870

Arpac Model BPMP5341, automatic, continuous motion, servo controlled, bottom overlap multipack, shrink wrapper and tunnel rated from 10 to 70 packages per minute – depending on materials, application and machine configuration. Product size range: 3" to 12" in Length; 6" to 18" in Width; 3" to 12" in Height. Equipped with 114" long x 14" wide plastic interlock in feed conveyor, with starwheel product feed and product lane grouper to flight bar product transfer to 34" long x 24" wide overlap wrap conveyor section with 24" long x 22" wide discharge conveyor to tunnel. Dual side film racks with splicer, film dancer with tension rollers and film registration. Film up to 26" maximum in width; 20" in maximum OD with 3" OD core. Shrink tunnel has 32" wide x 20" high aperture, x 132" long heating chamber with 204" long x 26" wide conveyor, 3 heating zones with independent heat controls and air recirculation fans with 2 cooling fans below to cool conveyor belt and top discharge cooling section. Control panel has A/B PLC controller, with touch pad controls with display, flight bar, cycle, power on, stop and e-stop push button controls with product jog, run and registration control switches, safety guarding and status light bar. Mounted on heavy duty base frame.

OAD: 364" L x 70" W x 80" H

Get a Free Quote Call: 630-629-9900

Great Lakes Shrink Bundler 737

  • Manufacturer: Great Lakes
  • Model Number: 737
  • Frain Number: R27021

Great Lakes, Model 737-2/P12360, semi automatic inline, shrink bundling and tunnel system, rated from 2 to 20 bundles per minute – depending materials, application and operator dexterity.
Bundler: Great Lakes Model 737-2: Package size range: up to 32" in Width; 14" in Height. Equipped with 53" wide x 15" long product staging load area, 36" wide upper and lower powered film rollers, 40" wide seal jaws with 14" of vertical travel and 32" wide x 48" long roller discharge conveyor with ¾" diameter rollers on 1" centers with ¼" gaps. Two hand push button operation with ribbon heat control. Mounted on heavy duty base frame with 35" to 39" in feed and discharge range.
Tunnel: Great Lakes Model P123060, automatic, shrink tunnel rated from 1 to 85 feet per minute with number of product – depending on materials and application. Equipped with 30" Wide x 10" High aperture x 60" Long single zone shrink chamber, 84" long x 28" wide flexlink product conveyor. Control panel with push button start/stop for conveyor and tunnel, temperature controller, variable air velocity and conveyor speed control dials. Mounted on (4) leg base frame with an in feed and discharge range of 36" to 38".

OAD: 72"L x 57"W x 75"H (bundler)
OAD: 84"L x 46"W x 80"H (tunnel)

Get a Free Quote Call: 630-629-9900

Arpac Shrink Bundler 112SS24

  • Manufacturer: Arpac
  • Model Number: 112SS24
  • Frain Number: 5G6550

Arpac Model 112SS-24, automatic, inline, stainless steel, shrink bundling system rated from 5 to 25 bundles per minute – depending on materials, application and machine configuration.

Bundler: Equipped with 15" wide x 14" long Delrin in feed conveyor, 28" wide seal jaw with 6-1/2" of vertical travel and 26" wide film carriages.

Tunnel: dimensions: 30" Wide x 16" High total aperture; 67" in Length with 24" wide x 90" long product conveyor. Arpac touch pad controls, heat seal and tunnel temperature readouts, start, stop, E-stop and status light bar. Mounted on stainless steel base frame.

OAD: 128"L x 60"W x 80"H

Get a Free Quote Call: 630-629-9900

Eastey Shrink Bundler EB35A

  • Manufacturer: Eastey
  • Model Number: EB35A
  • Frain Number: R26900

Eastey Model EB35A, automatic, inline, intermittent motion, shrink bundler. Package size: up to 35" in Width; up to 22" in Height. Equipped with dual 47" long x 15" wide flex link in-feed and discharge conveyors, 36" wide hot knife seal jaw with 23" of vertical travel and PLC touch pad controller. Additional features E-Stops and status light bar. Accepts film up to 14" in diameter.

Eastey Model ET3620BU, shrink bundler tunnel. Aperture: 20" in Height; 38" in Width. Tunnel length: 52". Equipped with 120" long x 36" wide flex link conveyor and dual exit cooling fans. Control panel with power on / off, temperature, conveyor speed and air velocity. Mounted on height adjustable legs.

Speed dependant on materials, application and machine configuration.

OAD: 100" L x 60" W x 78" H (bundler)
OAD: 120" L x 55" W x75" H (tunnel)

Get a Free Quote Call: 630-629-9900

Shanklin Shrink Bundler B2BB

  • Manufacturer: Shanklin
  • Model Number: B2BB
  • Frain Number: R25750

Shanklin Model B2BB, automatic, inline, intermittent motion, shrink bundler rated from 5 – 15 bundles per minute – depending on materials and application. Capable of handling up to a 30" wide x 20" high package. Equipped with 29" long by 29" wide in feed conveyor, 32" wide hot wire seal jaw and 32" long by 34" wide discharge conveyor. Film roll: 30" wide by 11" diameter. Control panel has A/B controller has touch pad controller with readout and seal jaw tempurature controllers, variable tempature dwell time, conveyor speed dial controls, start / stop buttons with e-stop and status light bar, mounted on base frame with casters. Film roll: 30" wide by 11" diameter.

OAD: 93" L x 72" W x 67" H

Get a Free Quote Call: 630-629-9900