Stainless Steel Jacketed Machines

Used Stainless Steel Jacketed Equipment

Tank SS JKT is a general category of stainless tanks that have a jacket and are constructed of various grades of stainless steel. SS Jacketed tanks can have a variety of tops and bottoms from flat to cone and dished with jacketing covering all or only portions of the tank. Usually SS jacketed tanks are also insulated for efficient heat transfer. SS jacketed tanks may also be equipped with a variety of agitations from simple propeller type to full scraped sides with double or triple motion agitators.

Stainless Steel Jacketed Equipment In Stock

Lee Tank SS JKT 1500LU

  • Manufacturer: Lee
  • Model Number: 1500LU
  • Frain Number: 5H4573

Lee 316L Strainless Steel 396 gallon (1500 Liter) jacketed reactor vessel. Vessel Dimensions: 48"ID x 58"high straight side. Dome top/dish bottom equipped with 16"diameter manway with clampdown cover. (2) 8"flanged top ports, (3) 4", (2) 3", (2) 2" and (4) 1-1/2" tri-clamp connections inlet ports. (2) 4" and (4) 1-1/2" side bottom tri-clamp connections outlet ports, 2" Asepco 316L tank-bottom radial diaphragm flush valve, 6-1/2" ground clearance. Tank mounted on (4) 7"high tubular legs.

National Board:5931
MAWP Internal 45psi @ 266°F
MAWP Jacket 100psi @ 338°F
MDMT Internal -20°F @ 45psi
MDMT Jacket -20°F @ 100psi

OAD: 54"L x 52"W x 85"H

Get a Free Quote Call: 630-629-9900

Mueller Tank SS JKT 2000 GAL

  • Manufacturer: Mueller
  • Model Number: 2000 GAL
  • Frain Number: R29037

Mueller, 2000 gallon capacity, 304 stainless steel jacketed and insulated process tank. Vessel dimensions: 76" diameter with a 100" straight wall. Equipped with a dome top with an 18" diameter top hinged man way, (2) CIP spray balls supplied by a 2"OD / 1½"ID Tri-clamp fitting, (1) thermowell, 10 Hp top mounted scrape agitator and pneumatic plug valve with a 3½"OD / 3"ID Tri-clamp fitting and 30" ground clearance.

Top Ports:
(1) 3½"OD / 3"ID Tri-Clamp
(1) 3"OD / 2½"ID Tri-Clamp
(2) 2½"OD / 2"ID Tri-Clamp

Jacket Ports:
(6) 1½"NPT

MAWP: 192 PSI @ 100°F
Nat’l Brd: 1023

OAD: 106"L x 86"W x 190"H

Get a Free Quote Call: 630-629-9900

Mueller Tank SS JKT 700 GAL

  • Manufacturer: Mueller
  • Model Number: 700 GAL
  • Frain Number: R29036

Mueller, 700 gallon capacity, 304 stainless steel, insulated process tank. Vessel dimensions: 76" diameter x 70" deep with a 48" straight wall. Equipped with a dome top with an 18" diameter top hinged man way, (1) fixed angle baffle, (2) thermowells, 5Hp / 6 Hp (2) speed top mounted scrape agitator and 6"cOD / 5"cID Tri-clamp fitting discharge with 24" ground clearance.

Top Ports:
(1) 3½"OD / 3"ID Tri-Clamp
(1) 3"OD / 2½"ID Tri-Clamp
(1) 3"OD Open Vent

Jacket Ports:
(5) 1½" NPT

OAD: 105"L x 96"W x 135"H

Get a Free Quote Call: 630-629-9900

APV Crepaco Tank SS JKT CCA

  • Manufacturer: APV Crepaco
  • Model Number: CCA
  • Frain Number: R29034

APV, Model CCA, 700 gallon capacity, 304 stainless steel jacketed and insulated process tank. Vessel dimensions: 66" diameter with a 48" straight wall. Equipped with a dome top with an 18" diameter top hinged man way, (2) CIP spray balls supplied by a 2"OD / 1½"ID Tri-Clamp fitting, (1) adjustable angle baffle, (1) thermowell, (1) flush mount bottom sensor, 3 Hp top mounted sweep agitator and pneumatic plug valve with a 3½"OD / 3"ID Tri-clamp fitting and 28" ground clearance.

Top Ports:
(1) 3½"OD / 3"ID Tri-Clamp
(1) 2½"OD / 2"ID Tri-Clamp
(1) 2"OD Open Vent

Side Ports:
(1) 2"OD / 1½"ID Tri-Clamp

Jacket Ports:
(2) 1¼" NPT

MAWP: 75 PSI @ 350°F
MDMT: -20°F @ 75 PSI

OAD: 100"L x 76"W x 125"H

Get a Free Quote Call: 630-629-9900

APV Crepaco Tank SS JKT CCA

  • Manufacturer: APV Crepaco
  • Model Number: CCA
  • Frain Number: R29032

APV, Model CCA, 700 gallon capacity, 304 stainless steel jacketed and insulated process tank. Vessel dimensions: 66" diameter with a 48" straight wall. Equipped with a dome top with an 18" diameter top hinged man way, (2) CIP spray balls supplied by a 2"OD / 1½"ID Tri-Clamp fitting, (1) adjustable angle baffle, (1) thermowell, (1) flush mount bottom sensor, 3 Hp top mounted sweep agitator and pneumatic plug valve with a 3½"OD / 3"ID Tri-clamp fitting and 28" ground clearance.

Top Ports:
(1) 3½"OD / 3"ID Tri-Clamp
(1) 2½"OD / 2"ID Tri-Clamp
(1) 2"OD Open Vent

Side Ports:
(1) 2"OD / 1½"ID Tri-Clamp

Jacket Ports:
(2) 1¼" NPT

MAWP: 75 PSI @ 350°F
MDMT: -20°F @ 75 PSI

OAD: 100"L x 76"W x 125"H

Get a Free Quote Call: 630-629-9900

APV Crepaco Tank SS JKT CCA

  • Manufacturer: APV Crepaco
  • Model Number: CCA
  • Frain Number: R29033

APV, Model CCA, 700 gallon capacity, 304 stainless steel jacketed and insulated process tank. Vessel dimensions: 66" diameter with a 48" straight wall. Equipped with a dome top with an 18" diameter top hinged man way, (2) CIP spray balls supplied by a 2"OD / 1½"ID Tri-Clamp fitting, (1) adjustable angle baffle, (1) thermowell, (1) flush mount bottom sensor, 3 Hp top mounted sweep agitator and pneumatic plug valve with a 3½"OD / 3"ID Tri-clamp fitting and 28" ground clearance.

Top Ports:
(1) 3½"OD / 3"ID Tri-Clamp
(1) 2½"OD / 2"ID Tri-Clamp
(1) 2"OD Open Vent

Side Ports:
(1) 2"OD / 1½"ID Tri-Clamp

Jacket Ports:
(2) 1¼" NPT

MAWP: 75 PSI @ 350°F
MDMT: -20°F @ 75 PSI

OAD: 100"L x 76"W x 125"H

Get a Free Quote Call: 630-629-9900

Ross Tank SS JKT ME510

  • Manufacturer: Ross
  • Model Number: ME510
  • Frain Number: 5H1911

Stainless & Steel Products Co., 50 gallon capacity, 304 stainless steel jacketed process tank. Vessel dimensions: 17¾" diameter with 48" straight wall. Equipped with (4) 1½" wide x 30" long fixed baffles, (1) thermowell, bottom liquid injection ring supplied by a ½" npt connection and top mounted high shear emulsifier.
Ross, Model ME 510, stainless steel, high shear emulsifier. Equipped with a top mounted 10 hp / 3500 rpm drive, (7/8)" slotted disintegrating head and optional downthrust shaft propeller.
Vessel and mixer mounted on a base with a 2" NPT bottom drain and 22" ground clearance.

Top Side Ports:
(1) ¾" NPT
(1) ½" NPT
(1) ¼" NPT

Bottom Side Ports:
(1) 1¼" NPT
(1) ½" NPT

Jacket Ports:
(3) ¾" NPT

MAWP: 40PSI / FV (Vessel)
MAWP: 50 PSI @ 300°F (Jacket)

OAD: 56"L x 36"W x 106"H

Get a Free Quote Call: 630-629-9900

APV Crepaco Tank SS JKT CCA

  • Manufacturer: APV Crepaco
  • Model Number: CCA
  • Frain Number: R29038

APV, Model CCA, 350 gallon capacity, 304 stainless steel jacketed and insulated process tank. Vessel dimensions: 48" diameter with a 40" straight wall. Equipped with a dome top with an 18" diameter top hinged man way, (2) CIP spray balls supplied by a 2"OD / 1½"ID Tri-clamp fitting, (1) adjustable angle baffle, (1) thermowell, 2 Hp top mounted sweep agitator, 0.30 hp top mounted prop agitator and 4½"OD / 3½"ID I-Line fitting discharge with 32" ground clearance.

Top Ports:
(1) 2½"OD / 2"ID Tri-Clamp
(1) 2"OD / 1½"ID Tri-Clamp
(1) 2½"OD Open Vent

Jacket Ports:
(4) 1¼" NPT

MAWP: 75 PSI @ 350°F
MDMT: -20°F @ 75 PSI

OAD: 68"L x 58"W x 108"H

Get a Free Quote Call: 630-629-9900

Lee Tank SS JKT 1000L

  • Manufacturer: Lee
  • Model Number: 1000L
  • Frain Number: 5H3041

Lee, 1000 liter capacity, 316L stainless steel, jacketed and insulated, internal vacuum tank. Vessel dimensions: 42" diameter x 54" deep with a 44" straight wall. Equipped with an 18" diameter bolt down manway, (1) thermowell and plug valve with 2"OD / ¾"ID Tri-Clamp style discharge with 11" ground clearance. Mounted on a forkliftable stainless steel base with casters.

Top Ports:
(2) 4½"OD / 4"ID Tri-Clamp
(1) 2½"OD / 2"ID Tri-Clamp
(2) 2"OD / 1½"ID Tri-Clamp
(1) 2"OD / ¾"ID Tri-Clamp

Jacket Ports:
(2) 2"OD / ¾"ID Tri-Clamp

MAWP: 45 PSI @ 302°F (Vessel)
100 PSI @ 338°F (Jacket)

MDMT: -20°F @ 45 PSI (Vessel)
-20°F @ 100 PSI (Jacket)

Vac: FV (Vessel)

Nat’l Brd: 6793

OAD: 63"L x 53"W x 80"H

Get a Free Quote Call: 630-629-9900

Lee Tank SS JKT 135UDBT NB 3255 Tank 500L ts

  • Manufacturer: Lee
  • Model Number: 135UDBT
  • Frain Number: 5G1973

125 gallon, 316 stainless steel, jacketed, internal vacuum rated mixing tank. Vessel dimensions: 26" ID x 36" straight wall. Equipped with dome top, 16" ID bolt down man way with (3) 2" OD and (1) 3" OD sanitary top ports. Full side and bottom jacket with pressure ratings of: MAWP 150 psi @ 365 Deg F. Full vacuum with pressure rating of: MAWP 50 psi @ 365 Deg F with (2) 1-1/2" ID, side and (1) 1-1/2" ID threaded bottom jacket in / outlets. Dish bottom has 3" OD staintary center bottom discharge and valve, with 16" floor clearance without valve and 10" floor clearence with valve and (4) blade bottom prop mixer. Mounted on (3) stainless steel legs. National Board # 3255

Get a Free Quote Call: 630-629-9900

DCI Tank SS JKT 1000GAL

  • Manufacturer: DCI
  • Model Number: 1000GAL
  • Frain Number: 5G7891

DCI, 1,000 gallon capacity, 316 stainless steel low pressure jacketed and insulated tank. Vessel dimensions: 72" diameter x 64" deep with slant style bottom. Equipped with 18" diameter man way, with bolt down cover, (2) CIP spray balls with 2"OD / 1½"ID Tri-clamp style connections, (3) thermowells, (1) 10" wide baffle and top mounted 5 hp bottom sweep agitation. Unit mounted on (4) legs with a 2½" OD / 2" ID Tri-clamp style side bottom discharge with 15" ground clearance.

Top Ports:
(2) 3½"OD / 3"ID Tri-clamp

Jacket Ports:
(6) 2" NPT

OAD: 82"L x 78"W x 112"H

Get a Free Quote Call: 630-629-9900

Chicago Stainless Equipment Tank SS JKT 2000 GAL

Chicago Stainless, 2,000 gallon, 304 stainless steel jacketed and insulated horizontal tank. Vessel Dimensions: 84" diameter x 86" straight wall with dish ends. Equipped with a 20" x 16" front end man way with flip open cover, 1 Hp top 10" wide paddle style mixer, (2) CIP spray balls, (2) thermowells, (1) diaphragm pressure sensor, (2) 5" diameter sight ports and a 2½" OD/2" ID tri-clamp ball valve discharge fitting with ___" ground clearance and front end access ladder. Mounted on (4) leg tubular legs.

Jacket Ports:
(3) 2" NPT

Front Ports:
(2) 2½" OD / 2" ID – Seated Bevel
(1) 2" OD – Open Vent

OAD: 130"L x 90"W x ___"H

Get a Free Quote Call: 630-629-9900