See us at the PMCA Show in Lancaster, PA on 4/15
Home » Stainless Steel Tank » Stainless Steel Jacketed » Page 3
Tank SS JKT is a general category of stainless tanks that have a jacket and are constructed of various grades of stainless steel. SS Jacketed tanks can have a variety of tops and bottoms from flat to cone and dished with jacketing covering all or only portions of the tank. Usually SS jacketed tanks are also insulated for efficient heat transfer. SS jacketed tanks may also be equipped with a variety of agitations from simple propeller type to full scraped sides with double or triple motion agitators.
Feldmeier, 300 gallon working capacity, 304 stainless steel jacketed and insulated tank. Vessel dimensions: 48" diameter x 52" deep with slant bottom. Equipped with a 24" x 16" manway with flip up cover, (2) level sensors, 44" x 2" sight glass and 3 Hp top mounted prop agitator. Unit mounted on (4) legs with a 3½" OD / 3" ID Tri-clamp style front discharge with 15" ground clearance.
Top Ports:(2) 3½"OD / 3"ID Tri-clamp(1) 2"OD / 1½" ID Tri-clamp(1) 4½" Open Vent(2) ¾" NPT
Jacket Ports: (6) 1½" NPT
MAWP: 100PSI / FV @ 300°FMDMT: -20°F @ 100PSI / FVNat’l Brd: 5005
OAD: 56"L x 51"W x 118"H
Feldmeier, 500 gallon, 316 stainless steel, low pressure jacketed tank. 51" diameter x 60" straight wall. Side mounted prop style agitator is pneumatically powered. Low pressure jacket has (2) 1.5" ID inlet/outlet connections. Vessel has a dome top with (1) 17" manway, (1) 3.5"ID, (1) 3" ID, (2) 2.5" ID, (1) 1.75" ID and (1) CIP spray nozzle. The sidewall has (1) 4.5" ID and (1) 7.5" diameter four-bolt pattern flange fittings with 3.25" ID. Dish bottom has (1) 2.5" ID side discharge with 18" ground clerance. Mounted on (4) stainless steel legs.
OAD: 70" L x 70" W x 82" H
Dover, 300 gallon 316 stainless steel, jacketed mixing tank. Vessel dimmensions 41" diameter x 49" straight wall. Bridge mounted bottom sweep agitation powered by 1 HP drive. one Lift up lid and one bolt down cover with three 1.75" ID top ports. two 1" and three 3/4" threaded in/out jacket ports and one 3.5" ID port on the bottom of the side wall. Cone bottom has 2.75" ID bottom discharge port with 0" floor clearance and mounted on (4) stainless steel legs.
Jacket Access:(2) 1" NPT
MAWP: 100 psi
OAD: 48"L x 45"W x 77"H
Precision Stainless 300 gallon 316L stainless steel vacuum rated jacketed tank. Vessel Dimensions: 48" diameter; 37" straight wall. Pressure Ratings: Jacket 50 psi @ 250° F; Vacuum 30 psi @ 250° F. Equipped with a dome top, 18" round manway with hinged bolt down cover, (1) 2" OD top sanitary, (1) 2.5" OD top sanitary, (1) 5" top sanitary, and (1) 3" OD top sanitary fittings; (1) 1-1/4" side jacket threaded fitting, (1) 2" side jacket threaded fitting, (1) 2" bottom jacket threaded fitting; insulated dish bottom with 2" threaded center bottom discharge with 13" ground clearance. Mounted on stainless steel frame with casters.
OAD: 54" L x 64" W x 82" H
Sign up for our newsletter to receive the latest in packaging tips, case studies and more.