See us at the PMCA Show in Lancaster, PA on 4/15
Home » Mixers - Paste Mixing » Page 3
Frain Industries carries several types of mixers covering numerous process stages including comminution, mixing, drying, agglomeration, classification, weighing, and metering. Additionally, mills are capable of aeration, deaeration, emulsification, general pre-milling, processing, homogenization, particle size reduction, paste mixing, vacuum mixing, and whipping.
The Frain engineering team can design a paste mixing solution based on your final product, volume, and integration requirements. Contact us today to discuss you paste mixing needs.
Frain Industries carries used paste mixers from many OEM’s including E.T. Oakes, Asser Oakes & Bollin Dale Engineering, Design Integrated Technology, Inc. (DIT), Kady® International, Ross, Cornell, Peerless Food Equipment, Votator, Reitz, Komline- Seider, Hosokawa Micron, Mars Mineral, Aeration Mixer BM, FEECO, Scott Equipment Company, Readco, Munson, Process Control Corporation, Patterson-Kelley, and many others.
316 stainless steel 42 cu ft (2,650 lb or 320 gallons) USDA jacketed blender / cooker. Designed for gentle mixing and blending of delicate food products with the ability to heat or cool and direct pump out. Mixing chamber dimmensions of: 59" Long x 47" Wide x 47" Deep with a filp up counter balanced cover for easy opening and closing. 6" and 1-1/2" Diameter sanitary threaded top inlets and (2) side 2" dia tri clamp inlets and a 3" Diameter tri clamp sanitary center bottom discharge. Vessel can be used for batch processing or incorporated into continuous process system. Last used in the food industry.
OAD: 80" H x 60" W x 87" L Aprox Shipping weight 1500 lbs
Amfec, Model 510, 14 ft³ (10 ft³ working capacity), 304 stainless steel dual trough paddle mixer with pounds of product per hour – depending on materials and application. Dual mixing troughs with inner dimensions of: 41" in Length; 31" in Width; 25" in Depth. Equipped with lift up safety grate and dual flip top covers. 11½" wide x 5" high x ¼" thick stainless steel paddles on 2" OD shaft, (2) 2 Hp motor drives and dual discharge gates with safety guarding and 31" ground clearance. Control panel has push button start / stop, digital timer and switches for mix / reverse, timer on / off, door open / close, and run / jog. Mounted on a stainless steel frame with leveling legs.
OAD: 82"L x 48"W x 56"H
Amfec, Model 510, 14 ft³ (10 ft³ working capacity), 304 stainless steel dual trough paddle mixer with pounds of product per hour – depending on materials and application. Dual mixing troughs with inner dimensions of: 41" in Length; 30½" in Width; 21½" in Depth. Equipped with lift up safety grate and dual flip up covers, 9" wide x 5" high stainless steel paddles on 2" OD shaft, (2) 2 Hp motor drives and dual discharge gates with safety guarding and 32" ground clearance. Control panel push button start / stop, digital timer and switches for mix / reverse, timer on / off, door open / close, and run / jog. Mounted on a stainless steel frame with leveling legs.
OAD: 84"L x 48"W x 83"H
Wolfking, Model TSMV-3250L, Stainless steel, dual trough, vacuum paddle blender with amount of product per hour – depending on materials and application. Capacity: 160 ft³ (114 ft³ working). Dual trough dimensions: 68" in Length; 40" in Width; 55" in Depth each trough. Equipped with lift up top cover, dual pneumatic gate end discharges with 58" ground clearance. Powered by (2) 20 Hp motor drives. Mounted on heavy duty frame.
OAD: 124" L x 96" W x 142" H
Mepaco, Model 170, stainless steel dual trough, ribbon blender. Capacity: 25ft³ (15 ft³ working) (750 Lbs.). Dual Trough dimensions: 52" in Length; 33" in Width; 26" in Depth; 20" Straight Wall. Equipped with pneumatic lift up top cover, (6) injection ports with individual pneumatic valves, 1" wide x ½" thick ribbons, 3" diameter motor shafts and (2) 5" x 19½" pneumatic flush mount bottom gate discharges with 30" ground clearance. Powered by (2) 7½ Hp motor drive. AB touch screen HMI. Pounds of product per hour – depending on materials and application
OAD: 100" L x 50" W x 82"H
Mepaco, Model 170, stainless steel dual trough, ribbon blender. Pounds of product per hour – depending on materials and application. Capacity: 25ft³ (15 ft³ working) (750 Lbs). Dual Trough dimesions: 52" in Length; 17" in Width; 26" in Depth; 20" Straight Wall. Equipped with pneumatic lift up top cover, (6) injection ports, 1" wide x ½" thick ribbons, 3" diameter motor shafts and (2) 5" x 19½" pneumatic flush mount bottom gate discharges with 30" ground clearance. Powered by (2) 7½ Hp motor drive. Control panel has AB Controller and touch screen HMI. Mounted on heavy duty base frame with casters.
Rietz, 4½ ft³ (3 ft³ working capacity) 304 stainless steel jacketed, dual trough mixer with single ribbons and amount of product per hour – depending on materials and application. Jacketed mixing chamber dimensions of: 28" in Length; 20" in Width; 16" in Depth. Equipped with open top and has 3" OD dual mixing shafts with 1½" wide x ½" thick stainless steel ribbons powered by (2) 5 Hp motor drives and has (2) 8½" wide x 3½" high end discharge ports has dual pneumatic flip up covers with 38" ground clearence. Control panel has run, forward / reverse, start and stop controls. Mounted on stainless steel frame with casters.
MAWP: 45 PSI @ 292°F (Jacket)
OAD: 68" L x 48" W x 78" H
Cornell, Model D16, Variable speed "Versator" rated from 1 to 20 gallons per minute – depending on materials, application and machine configuration. 316 stainless steel contact parts (No. 4 Polish). Equipped with 16" ID disc, rotation rated from 1200 to 3220 rpm, with 2" OD / 1½" ID Tri-Clamp side chamber in feed and discharge product ports, 2½" OD / 2" ID Tri-Clamp top vacuum port, pressure gauge and 2" OD / 1½" ID Tri-Clamp bottom drain. Clamp down cover with 4" ID sight ports and 7½ Hp motor drive with variable speed gear reducer and pressure guage. Mounted on a heavy duty base.
Product flows thru a film forming ring out and then over the surface of rotating disc where the dispersion and deaeration action occurs, used for despersion and deaeration of food, cosmetic, pharmaceutical and chemical products.
OAD: 72" L x 48" W x 60" H
Cornell Model D26, "Versator", deaerator, with vacuum system rated from 5 to 125 gallons and 1000 to 3200 rpm per minute – depending on materials, application and machine configuration. Equipped with a 26" diameter product rotating disc, (2) 2" NPT side chamber product charge and discharge ports, (1) 1½" NPT top vacuum port, pressure gauge and 2" NPT bottom drain. Swing open bolt down door has (2) 7¼" OD / 3½" ID front flanged sight ports, 15 Hp (4) belt to motor main drive with safety guarding and Stokes Model 148H-9 2 hp vacuum system with (2) 1¾" NPT fittings. Mounted on a 72" long x 49" wide base platform frame.
Operation: Product flows thru film forming ring out and then over the surface of rotating disc where the dispersion and deaeration action occurs, used in food, cosmetic, pharmaceutical and chemical applications.
OAD: 72"L x 52"W x 75"H
Oakes Model 60SMV751, Stainless steel, continous motion, slurry mixer and transfer system rated up to 440 gallons or 2,000 lbs of product per load with 15 minutes or less mix times – depending on materials, application and machine configuration. Equipped with 60" ID x 36" straight wall stainless steel product mix tank with pnuematic flip up cover and magnetic safety switch with (2) stationary pull out stator assemblies one each side and inner rotating mixing blades with bottom platform mounted motor drive. Waukesha Model 200U1PD transfer pump has 4½" OD / 4" ID inlet / outlets ports with twin wing rotors, O-Ring seals, 10 Hp motor drive to ensure quick and total transfer of product and now mixer is ready to receive another batch. Control panel has A/B controller and panel view with digital readout, rotor, pump and e-stop push button controls. A/C starter package and A/B poweflex VFD. Mounted on 102" long x 79" wide stainless steel platform with legs.Ideal for icing, frosting, slurries and more.
OAD: 104" L x 79" W x 108" H
Hobart, Model HL1400 mixer. Rated up to 140 quart maximum capacity, per batch with pounds of product per hour – depending on materials, application and operator dexterity. Equipped with stainless steel contact parts, 4-speed controls, 5 Hp motor drive with gear driven transmission, digital timer, power bowl lift, stainless steel 140 quart bowl with bowl guard and bowl trolley with casters. Controller has push button start, stop and hydraulic bowl lift controls with Metallic Gray hybrid powder coat finish. Mounted on base frame.
OAD: 48"L x 32"W x 68"H
Hobart, Model HL600, planetary floor mixer, rated up to 60 quart maximum capacity, per batch with pounds of product per hour – depending on materials, application and operator dexterity. Equipped with stainless steel contact parts, 4-speed, 2.7 Hp motor drive with gear driven transmission and smart timer, electric power bowl lift, stainless steel 60 quart bowl with type "B" beater bar and mixer bowl splash cover with bowl guard and bowl trolley with casters. Controller has push button start, stop and bowl lift controls with Metallic Gray hybrid powder coat finish. Mounted on (4) leg frame.
OAD: 42"L x 24"W x 62"H
Sign up for our newsletter to receive the latest in packaging tips, case studies and more.