Capping Machines

New Jersey Capper Quill BT-IC

• Manufacturer: New Jersey
• Model Number: BT-IC
• Frain Number: R31163

NJM / Beltorque Model BT-IC Inline, stainless steel, belt style cap tightener, with cap feeder rated from 30 to 300 containers per minute – depending on material and application. Cap size range: 0.9" to 4-3/4" OD, Container size range: 0.5" to 7" OD and container height range: 2" to 12". Equipped with 30" long x 1/2" wide double container gripper belts and (2) sets of 6" long x 1/2" wide cap tightner belts each side. Control panel has A/B controller with panel view and touch pad controller with digital readout, vari speed controls, statis light bar and e-stop. Mounted on "H" style stainless steel frame with leveling legs.

NJM Cleated cap feeder with 36" long x 24" wide x 21" deep stainless steel cap hopper with flip top cover, 80" long x 12" wide cleated belt conveyor with 7/8" high cleats set on 3" centers and 80" discharge height. Mounted on stainless steel frame with leveling legs.

OAD: 44" L x 36" W x 72" H Capper
48" L x 36" W x 97" H Feeder

Axon Capper Neck Bander EZ130

• Manufacturer: Axon
• Model Number: EZ130
• Frain Number: 5H7219

Axon, Model EZ-130 automatic, tamper evident shrink neck bander or sleeve label applicator with Model EZ-36 shrink tunnel. Rated from 30 to 150 containers per minute – depending on materials, application and machine configuration. Layflat: 15mm to 130mm. Film thickness: 40 to 70 microns (1.5 to 3 mil). Equipped with photo eyes for machine activation, low roll sensor, knife film cut off, stepper drive film feed system, vertical perf and tamp. Touch pad controller with LED display. Film specifications: up to 16" OD roll. Mounted on a height adjustable stainless steel frame.

OAD: 53"L x 48"W x 84"H

SureKap Capper Quill SK6000-BF6XP

• Manufacturer: SureKap
• Model Number: SK6000-BF6XP
• Frain Number: R32913

SureKap Model SK6000 BF6-70, automatic, inline, stainless steel, 3 station, 6 spindle roll over conveyor capper and cap feeder with number of containers per minute – depending on materials and application Cap size range: 22mm to 70mm. Equipped with 120" long x 4-1/2" wide stainless steel container conveyor, 21" long x 25" wide x 18" deep (4 ft³) cap hopper, 77" long x 6" wide elevator with 2½" high cleats on 6" centers, 46" long x 5½" wide cap feeding / sorting belt, adjustable cap chute, with 24" long x 1" wide single container gripper belts, (3) hand crank adjustable (6) spindle stations (2) sets of mechanical clutches for increased torque control. Control panel with spindle and gripper control dials, start and e-stop buttons. Mounted on heavy duty stainless steel frame with casters.

OAD: 120" L x 40" W x 63" H

SureKap Capper Quill SK6000-BF6XP

• Manufacturer: SureKap
• Model Number: SK6000-BF6XP
• Frain Number: R32914

SureKap Model SK6000 BF6-70, automatic, inline, stainless steel, 3 station, 6 spindle roll over conveyor capper and cap feeder with number of containers per minute – depending on materials and application Cap size range: 22mm to 70mm. Equipped with 120" long x 4-1/2" wide stainless steel container conveyor, 21" long x 25" wide x 18" deep (4 ft³) cap hopper, 77" long x 6" wide elevator with 2½" high cleats on 6" centers, 46" long x 5½" wide cap feeding / sorting belt, adjustable cap chute, with 24" long x 1" wide single container gripper belts, (3) hand crank adjustable (6) spindle stations (2) sets of mechanical clutches for increased torque control. Control panel with spindle and gripper control dials, start and e-stop buttons. Mounted on heavy duty stainless steel frame with casters.

OAD: 120" L x 40" W x 63" H

Pillar Capper Induction Sealer 2.25 KW

• Manufacturer: Pillar
• Model Number: 2.25 KW
• Frain Number: R33060

Pillar, Model D2P1002000000, 2.25Kw ifoiler, compact, air cooled, induction sealier. Rated from 10 to 120 feet per minute with number of products – depending on materials and application. Equipped with 25" long flat bar sealing head and capable of sealing up to 150mm caps. Microprocessor controller has touch pad controls with digital readout and detection / customer connection ports with lockable disconnect, hand crank adjustabe and has maximum ambient operating temperature of 122 Deg F. humidity of 20% to 90% non – condensing. Mounted on unitized portable stand with casters and leveling legs ment to roll over existing conveyor.

OAD: 34" L x 30" W x 54" H

Pillar Capper Induction Sealer 2.25 KW

• Manufacturer: Pillar
• Model Number: 2.25 KW
• Frain Number: R32990

Pillar, Model D2P1002000000, 2.25Kw ifoiler, compact, air cooled, induction sealier. Rated from 10 to 120 feet per minute with number of products – depending on materials and application. Equipped with 25" long flat bar sealing head and capable of sealing up to 150mm caps. Microprocessor controller has touch pad controls with digital readout and detection / customer connection ports with lockable disconnect, hand crank adjustabe and has maximum ambient operating temperature of 122 Deg F. humidity of 20% to 90% non – condensing. Mounted on unitized portable stand with casters and leveling legs ment to roll over existing conveyor.

OAD: 34" L x 30" W x 54" H

Pillar Capper Induction Sealer 2.25 KW

• Manufacturer: Pillar
• Model Number: 2.25 KW
• Frain Number: R32800

Pillar, Model D2P1002000000, 2.25Kw ifoiler, compact, air cooled, induction sealier. Rated from 10 to 120 feet per minute with number of products – depending on materials and application. Equipped with 25" long flat bar sealing head and capable of sealing up to 150mm caps. Microprocessor controller has touch pad controls with digital readout and detection / customer connection ports with lockable disconnect, hand crank adjustabe and has maximum ambient operating temperature of 122 Deg F. humidity of 20% to 90% non – condensing. Mounted on unitized portable stand with casters and leveling legs ment to roll over existing conveyor.

OAD: 34" L x 30" W x 54" H

Anchor Hocking Glass / Oneida Capper Quill 4 RH

• Manufacturer: Anchor Hocking Glass / Oneida
• Model Number: 4 RH
• Frain Number: 5H6420

Anchor Hocking, AHP Series 4-RH, Automatic, steam flow, lug capper with number of containers per minute – depending on materials and application Cap size range: 27mm to 110mm. Container OD size range: 1-1/2" to 6-5/8". Both cap and jar size ranges per application with proper change parts. Equipped with 132" long x 4-1/2" wide Delran stainless steel container conveyor with no-container / no-cap senser, 36" long x 16" deep cap hopper magnetic star, cap selector and adjustable cap chute with cap detector and 7" wide x 4-1/2" high aperture x 60" long steam cap closure chamber has 75 lbs per square inch dry steam requirements, 3/4 gallon per minute at 50 psi water requirements, with container stabilizing side belts. Control panel has speed, exhaust and hopper control switches with start, stop / reset / e-stop push buttons. Mounted on heavy duty frame with height adjustable leveling legs.

Operation:
Bottles or containers are stabilized through the capping machine by using side belts, simultaneously dual belts apply significant down pressure on the cap, these belts travel at different rates which is what actually applies torque to the lug cap from introduction of the cap to the discharge of the capped product, tunnel is consistently flooded with steam. upon discharge this steam condenses which pulls a vacuum in the head space of the container.

OAD: 132" L x 50" W x 78" H

Fill-Tech Solutions Inc. Capper Over Lidder OC

• Manufacturer: Fill-Tech Solutions Inc.
• Model Number: OC
• Frain Number: R31790

Fill-Tech Solutions, Model OC, automatic, servo driven, stainless steel, inline overlidder. Rated from 20 to 200 containers per minute – depending on materials, application and machine configuration. Equipped with 167" long x 4½" wide plastic Delrin conveyor with adjustable guide rails, 36" long worm screw infeed, 48" long lugged chain container handling conveyor with container grippers pockets, 60" long powered spinning roller lid magazine and 7" long roller compression section. Control panel has A/B controller with A/B PanelView touch screen HMI and statis light bar. Mounted on multi-leg base frame.

OAD: 180"L x 60"W x 89

New England Capper HECS10

• Manufacturer: New England
• Model Number: HECS10
• Frain Number: 5H5642

New England, Model H/ECS-10, automatic, stainless steel, water fall style cap elevator / feeder and sorter. Rated from 50 to 300 caps per minute – depending on materials and application. Capable of handling screw, snap or childproof caps (with proper change parts). Equipped with 38" wide x 26" long x 18" deep (3½ ft³) cap hopper, 18" wide x 84" long cleated cap conveyor belt with ¼" high cleats on 6¼" centers, discharge chute with 85" discharge height. Mounted on a stainless steel base frame with leveling legs.

OAD: 48"L x 38"W x 110"H

Kaps All Capper Semi Auto (Capper) FE4

• Manufacturer: Kaps All
• Model Number: FE4
• Frain Number: R31170

Kaps All Model FE4, semi-automatic, 2 station, 4 spindle, stainless steel, cap retorquer. Cap size range: 13mm to 70mm. Equipped with 4-1/2" wide x 109" long Delrin conveyor, pair of 1" wide single container gripper belts, (2) station (4 spindle) retorquing section with adjustable torque clutches and safety guarding. Control panel has spindle and gripper on / off switches with speed control dials, raise / lower switch, pressure gauges and start / e-stop push buttons. Mounted on leveling legs. Speed dependent on materials, application and machine configuration.

OAD: 117" L x 36" W x 74" H

SureKap Capper Quill SK6000-BF6

• Manufacturer: SureKap
• Model Number: SK6000-BF6
• Frain Number: R30950

SureKap Model SK6000 BF6-70, automatic, inline, stainless steel, 3 station, 6 spindle roll capper.
Cap size range: 22mm to 70mm. Equipped with 120" long x 4-1/2" wide conveyor, 4 ft³ cap hopper, 46" long x 5½" wide cap feeding / sorting belt, adjustable cap chute, with 24" long x 1" wide single container gripper belts, (3) adjustable (6) spindle stations with (2) sets of mechanical clutches for increased torque control. Control panel with spindle and gripper control, start and e-stop buttons. Mounted on casters. Speed dependent on materials, application and machine configuration.

OAD: 96"L x 68"W x 102"H