Horizontal Machines

Goodway Mixer Paste Horizontal CM35

• Manufacturer: Goodway
• Model Number: CM35
• Frain Number: 5H1269

Goodway Model CM35, compact, stainless steel, continuous, high shear, rotar, stator, aerator, mixer rated from 250 to 4800 pounds of product per hour – depending on materials and application. Equipped with double wall mixing chamber for cooliant circulation with 16" OD / 13" ID pyramid shaped mixing head has raidial flow disc with high shear action consisting of front and rear rotor and stator with 2-1/2" OD threaded center finished product outlet port and sanitary seal drive shaft rated from 150psi standard up to 450psi on the CM35. Control panel has mixer / pump speed controls air suipply, head pressuree rergulator, and head presasure gaugesa flow and hour meters. Mounted on a stainless steel common base frame. Continuous mixer aerates cake batter, creme fillings, marshmallow, icings, whipped creme, butter and many others.

145 gallon, 304 stainless steel, single wall storage tank. Vessel Dimensions: 29" in Diameter; 66" straight wall. Equipped with a slant bottom and a 4.5" OD side discharge with 16" of floor clearance. Mounted on three steel legs.

OAD: 66" L x 35" W x 78" H (Mixer)
OAD: 33" L x 33" W x 84" H (Tank)

American Process Systems Mixer Paste Horizontal DRB40

• Manufacturer: American Process Systems
• Model Number: DRB40
• Frain Number: 5H1723

American Process Systems, 40 ft³, 316 stainless steel low pressure jacketed, variable speed, ribbon and paddle mixer. Inner mixing chamber dimensions of: 78" in Length; 32" in Width; 35" in Depth. Equipped with flip up bolt down covers, lift out safety grate, thermowell, 3" diameter mixing shaft with (2) 2" wide x (3/8)" thick outer stainless steel ribbons, scrapper blades and inner paddles powered by a 5 hp drive. Bottom end discharge with 3½"OD / 3"ID Tri-clamp connection, pneumatic flow valve and 10" ground clearance.

Vessel Access:
(1) 3¾"OD / 3"ID Tri-Clamp
(2) 2½"OD / 2"ID Tri-Clamp
(1) 1" NPT

Jacket Access:
(4) 1¼" NPT

OAD: 128"L x 42"W x 78"H

Oakes Mixer Paste Horizontal 14MC10

• Manufacturer: Oakes
• Model Number: 14MC10
• Frain Number: 5G9514

Oakes Model 14MC10, high shear, continuous, rotor and stator, pin mill rrated up to 4000 lb per hour – depending on materials and application. Equipped with 16" OD 14" ID mixing head, 2" OD center product port, radial flow disc, with high shear action consisting of front / rear stator and rotor with drive shaft, rated to ___ rpm. has __ Hp main motor, drive, with Waukeshaw PD pump with 2" OD / 1-1/2" ID pump inlet / outlets Control Panel with start, stop and e-stop controls. Mounted on (4) leg stainless steel base frame.

OAD: 56" L x 28" W x 82" H

Trefa Mixer Paste Horizontal T2000

• Manufacturer: Trefa
• Model Number: T2000
• Frain Number: 5G6430

Trefa Model 2000, dual head, stainless steel, continuous, mixing / aerating system rated from 100 to 2000 kg per hour, per head – depending on materials and application. Equipped with 15-1/2" long x 10" ID dual, jacketed pin style rotor / stator closed production mixing heads used for higher degree of sanitation and has 1-1/2" OD inlet, 2-1/2" OD outlet with bolt down removable covers. A/B controller has touch pad controls with read out and vari speed controllers, with (2) pressure gauges and e-stop. Mounted on stainless steel frame with casters. Continuous mixers provide homogenous mixing resulting in consistent final densities and modular design is easy to integrate into existing lines.

OAD: 96" L x 42" W x 72" H

Tanis Food Tech BV Mixer Paste Horizontal ROTOPLUS

• Manufacturer: Tanis Food Tech BV
• Model Number: ROTOPLUS
• Frain Number: 5G9916

Tanis Food Tec, stainless steel, high shear, continuous motion, rotor / stator, mixer. Rated from 600 to 4,000 lb of product per hour – depending on materials, application and machine configuration. Equipped with 12" OD mixing head, bolt down cover, 2½"OD / 2"ID Tri-clamp style charge port and 2½"OD / 1½"ID seated bevel style discharge with 33" ground clearance. Rotor powered by a 14¾ hp drive. Control panel with on / off switch, variable speed dial, air flow control dial and mixing head rpm display.

OAD: 70"L x 38"W x 94"H

Automated Food Systems Mixer Paste Horizontal 5 FT³

• Manufacturer: Automated Food Systems
• Model Number: 5 FT³
• Frain Number: 5H0440

Automated Food Systems, 5 ft³, 304 stainless steel, paddle mixer with number of product per hour – depending on materials, application and machine configuration. Inner mixing chamber dimensions: 24" in Length; 24" in Width; 28" in Depth. Equipped with flip up cover, 1½" OD mixing shaft with (4) wire beater paddles, (2) 1½" OD charge ports, 3½"OD / 3" ID Tri-clamp style center bottom discharge with butterfly valve and 11" floor clearence. Powered by a 5 Hp. Control panel with an AB controller, push button start / stop and timer indicator. Mounted on a stainless steel frame base with leveling legs.

OAD: 55"L x 35"W x 71"H

Colton Mixer Paste Horizontal 6 FT³

• Manufacturer: Colton
• Model Number: 6 FT³
• Frain Number: 5G7635

7 ft³ ( 5.7 ft³ workable), paddle mixer with stainless steel contact parts. Inner mixing chamber dimensions: 26" in Length; 19" in Width; 23" in Depth. Equipped with a 1½" diameter motor shaft, 1½" diameter mixing shaft with 1½" x 8" stainless steel paddles powered by a 2 Hp drive with variable speed control, Waukesha model 60 positive displacement pump powered by a 2 hp drive with a variable speed gearbox and 3" OD / 2½" ID Tri-clamp style discharge with 9" ground clearance. Mounted on stainless steel base frame with casters.

OAD: 48" L x 28" W x 55" H

Oakes Mixer Paste Horizontal 14MF20I

• Manufacturer: Oakes
• Model Number: 14MF20I
• Frain Number: R26850

Oakes Model 14MF, stainless steel, high shear, continuous rotor / stator, pin mill mixer rated up to 4,000 lbs per hour – depending on materials, application and machine configeration. Equipped with 14" diameter jacketed mixing head with 2-1/2" OD product inlet, radial flow disc with high shear action consisting of front / rear stator and 15 Hp motor. Waukesha Model 30 feed pump geared to 245 gallons per hour. Control panel with start / stop controls, counters and dual variable speed drives (mix head and pump). Mounted on heavy duty base frame.

OAD: 70" L x 36" W x 62" H

Cornell Mixer Paste Horizontal D26

• Manufacturer: Cornell
• Model Number: D26
• Frain Number: 5G6921

Cornell Model D26, "Versator", deaerator, with vacuum system rated from 5 to 125 gallons and 1000 to 3200 rpm per minute – depending on materials, application and machine configuration. Equipped with a 26" diameter product rotating disc, (2) 2" NPT side chamber product charge and discharge ports, (1) 1½" NPT top vacuum port, pressure gauge and 2" NPT bottom drain. Swing open bolt down door has (2) 7¼" OD / 3½" ID front flanged sight ports, 15 Hp (4) belt to motor main drive with safety guarding and Stokes Model 148H-9 2 hp vacuum system with (2) 1¾" NPT fittings. Mounted on a 62" long x 49" wide base platform frame.

Operation: Product flows thru film forming ring out and then over the surface of rotating disc where the dispersion and deaeration action occurs, used in food, cosmetic, pharmaceutical and chemical applications.

OAD: 62"L x 50"W x 72"H

RMF Companies Mixer Paste Horizontal 28-0750

• Manufacturer: RMF Companies
• Model Number: 28-0750
• Frain Number: R27070

RMF, Model 28-0750, 22 ft³ total (15 ft³ workable), dual paddle mixer with 304 stainless steel contact parts. Inner mixing chamber dimensions: 45" in Length; 36" in Width; 26" in Depth. Equipped with flip up grated covers, (2) 2¼" diameter motor shafts / 3½" diameter mixing shafts with 7" x 5" stainless steel paddles independently powered by 3 Hp drives, (2) 15" wide x 5" high end discharges with pneumatic covers and 50" ground clearance, (4) internal liquid spray nozzles supplied by (1) 2" NPT fitting. Mounted on mild steel (4) leg base frame.

OAD: 115" L x 60" W x 80" H

Cornell Mixer Paste Horizontal D26

• Manufacturer: Cornell
• Model Number: D26
• Frain Number: 5G6860

Cornell Model D26, "Versator", deaerator, with vacuum system rated from 5 to 125 gallons and 1000 to 3200 rpm per minute – depending on materials and application. Equipped with 26" OD product rotating disc, (2) 2" NPT side chamber product charge and discharge ports, (1) 1½" NPT top vacuum port, pressure gauge, flow rate gage and 2" NPT bottom drain. Swing open bolt down door has (2) 7¼" OD / 4" ID front flanged sight ports, 15 Hp (4) belt to motor main drive with safety guarding and Stokes Model 48H10 vacuum system with (2) 1½" NPT fittings. Mounted on 72" long x 49" wide base platform frame.

Operation: Product flows thru film forming ring out and then over the surface of rotating disc where the dispersion and deaeration action occurs, used in food, cosmetic, pharmaceutical and chemical applications.

OAD: 76"L x 69"W x 73"H

Cornell Mixer Paste Horizontal D26

• Manufacturer: Cornell
• Model Number: D26
• Frain Number: R25920

Cornell Model D26, "Versator", deaerator, with vacuum system rated from 5 to 125 gallons per minute – depending on materials, application and machine configuration. Equipped with all 316 stainless steel contact parts, 26" ID product rotating disc, with (2) 3"OD / 2¼"ID Tri-Clamp side chamber in feed and discharge product ports with 61" ground clearance, (1) 3-1/2" OD threaded top vacuum port, with pressure gauge and 4" OD threaded bottom drain. Swing open, bolt down door has (2) 7" OD, 3-1/2" ID front flanged sight ports with drip pan, 25 Hp (4) belt to motor main drive with safety guarding and SIHI Model LPHD liquid ring vacuum system has (4) 5" OD, 2" ID flanged ports and 10 Hp motor drive. Mounted on 78" long x 48" wide painted base platform frame.
Operation: Product flows thru film forming ring out and then over the surface of rotating disc where the dispersion and deaeration action occurs, used in food, cosmetic, pharmaceutical and chemical applications.

OAD: 78" L x 52" W x 87" H