See us at PACK EXPO International in Chicago, IL Nov. 3-6
Home » Stainless Steel Tank » Page 5
Frain Industries carries hundreds of used, stainless steel storage and processing tanks. Tanks vary greatly in their shape, size, and application. Frain stocks tanks ranging from 5 gallons to 10,000 gallons in many different configurations including: jacketed, single wall, vertical, horizontal, cone bottom, dish bottom, insulated, with or without agitation, CIP (clean in place), and many others. Additionally tanks can be made of multiple grades of stainless steel (typically 304 or 316/316L) with different levels of corrosion resistance.
Types of agitation available include: prop agitation, high sheer agitation, sweep agitation, dual agitation, emulsification, turbines, impellers, cage beaters, anchor paddles, gate paddles, and many others.
Jacket types include: conventional jackets, high pressure jackets, half-pipe coil jackets, multiple zone jackets, dimple jackets, and plate coils.
The Frain Industries engineering team can place you into a storage or processing tank solution for your application. If you are looking for a single tank or an integrated solution with automated fill and discharge options Frain has the equipment for your needs.
Frain Industries carries used tanks from many OEM’s including A&B Processing, Abec, Ace, Alfa Laval, Allegheny, American Process Systems, Apache, APV, APV Crepaco, B&G, CE Howard, Chem Tek, Cherry Burrell, Chester Jenson, Cream City, Crepaco, Dairy Craft, Damrow, DCI, Dover, Feldmeier, Groen, Highland, Howard, Langsenkamp, Lee, Letsch, Mueller, New Brunswick, Northland Stainless, Nova, Perma San, Perry, Pfaulder, Precision, Precision Stainless, Seitz Stainless, Walker, Willflow, and many others.
Quality Tank Solutions, 3,775 Gallon, 304 stainless steel, jacketed and insulated tank. Vessel Dimensions: 80" diameter x 168" straight wall. Equipped with a dome top, dish bottom, 18" x 22" side manway with bolt down cover, top 24" diameter manway with bolt down cover with full face sight glass, (1) thermowell, CIP spray ball supplied by a 3"OD / 2½"ID Tri-Clamp fitting and 3"OD / 2½"ID Tri-clamp style bottom discharge with 12" ground clearance.
Jacket Access:(5) 1½" NPT(3) ¾" NPT
Top Ports:(4) 3½" OD / 3" ID
MAWP: 50 PSI @ 200°F
OAD: 94"L x 87"W x 220"H
Stainless Fabrication Inc, 100 Gallon Dual Compartment, 316 stainless steel, insulated flavor tank. Each chamber is 100 gallons with inner dimension of 28" x 34" x 33" Deep. Equipped with lift up covers, 16" diameter manway, top mounted prop agitation powered by ½ Hp motor drive and CIP spray balls supplied by 2½"OD / 2"ID Tri-Clamp fittings. Slant bottom has 2½" OD / 2" ID Tri-Clamp side bottom discharge with 8" floor clearance. Rectangle construction provides maximum capacity in small floor area.
Top Access Ports (Left Compartment)(1) 4½"OD / 4"ID Tri-Clamp(1) 3"OD / 2½"ID Tri-Clamp(2) 2½"OD / 2"ID Tri-Clamp(1) 2"OD / 1½"ID Tri-Clamp
Top Access Ports (Right Compartment)(2) 4½"OD / 4"ID Tri-Clamp(1) 3"OD / 2½"ID Tri-Clamp(1) 2½"OD / 2"ID Tri-Clamp(1) 2"OD / 1½"ID Tri-Clamp
OAD: 81"L x 48"W x 81"H
Cherry Burrell, model BC, 3- Compartment, 304 stainless steel, low pressure jacketed and insulated flavor tank. Each chamber is 150 gallons with inner dimension of 28" x 34" x 39" Deep. Equipped with lift up covers, 28" x 12" manway, top mounted prop agitation powered by ½ Hp motor drive. Slant bottom has 2" OD / 1½" ID Tri-Clamp side bottom discharge with 10½" floor clearance. Rectangle construction provides maximum capacity in small floor area.
Top Access Ports (each compartment)(1) 2½"OD / 2"ID Tri-Clamp(1) 2"OD / 1½"ID Tri-Clamp
Jacket Ports(2) ¾" NPT
OAD: 97"L x 41"W x 75"H
Cherry Burrell, model BC, 2-Compartment, 304 stainless steel, low pressure jacketed and insulated flavor tank. Left chamber is 100 gallons with inner dimension of 24" x 29" x 39" Deep. Right chamber is 200 gallons with inner dimension of 44" x 29" x 39" Deep. Equipped with lift up covers, top mounted prop agitation powered by ¾ Hp motor drive. Slant bottom has 2½" OD / 2" ID Tri-Clamp side bottom discharge with 13½" floor clearance. Rectangle construction provides maximum capacity in small floor area.
Top Access Ports (each compartment)(2) 2½"OD / 2"ID Tri-Clamp(1) 2"OD / 1½"ID Tri-Clamp
OAD: 78"L x 38"W x 65"H
Feldmeier, 7500 gallon capacity, stainless steel jacketed and insulated process tank. 304 stainless steel contact parts and 304 stainless steel jacket and exterior parts. Vessel dimensions: 120" diameter with 144" straight wall. Equipped with dome top, 18" diameter bolt down man way, top mounted 10 Hp side and bottom scrape surface agitation, baffle, (2) CIP spray balls supplied by 2"OD / 1½"ID Tri-clamp fittings and thermowell. Dish bottom has 3½" OD / 3" ID center bottom pneumatic valve discharge with 30" ground clearence. Control panel with push button start / stop and variable speed control. Mounted on (4) legs with foot pads.
Nat’l Brd: 8616MAWP: 100 PSI @ 350°F (Jacket)MDMT: -20°F @ 100 PSI (Jacket)
MAWP: 10 PSI @ 165°F (Vessel)MDMT: -20°F @ 10 PSI (Vessel)
Top Ports:(1) 6" ID sanitary clamp covered vent(1) 4¾"OD / 4"ID Tri-Clamp(4) 2½"OD / 2"ID Tri-Clamp
Jacket Ports:(4) 1½" NPT
OAD: 130" L x 130" W x 262" H
SXR, 500 gallon, jacketed mixing tank. 63" diameter x 90" straight wall, domed top, with 21" L x 17" W manway and top mounted prop agitator, has two 3" diameter top inlets with 2-3/4" flange, two 2" diameter top inlet with 3/4" flange and two 1" diameter top inlet with 2" flange. 304 stainless steel shell, full vacuum rated at 200psi @ 300F and carbom steel Jacket rated at 40psi @ 300F. Dish bottom with 3" diameter threaded center bottom discharge with 2-1/4" flange and 20" ground clearance and mounted on four legs.
OAD: 81"L x 81"W x 160"H
SXR, 500 gallon, jacketed mixing tank. 63" diameter x 90" straight wall, domed top, with 21" L x 17" W manway and top mounted prop agitator, has two 3" diameter top inlets with 2¾" flange, two 2" diameter top inlet with ¾" flange and two 1" diameter top inlet with 2" flange. 304 stainless steel shell, full vacuum rated at 200psi @ 300°F and carbon steel Jacket rated at 40psi @ 300°F. Dish bottom with 3" diameter threaded center bottom discharge with 2¼" flange and 20" ground clearance and mounted on four legs.
OAD: 81" L x 81" W x 160" H
Feldmeier, 7500 gallon capacity, stainless steel jacketed and insulated process tank. 304 stainless steel contact parts and 304 stainless steel jacket and exteroir parts. Vessel dimensions: 120" diameter with 144" straight wall. Equipped with dome top, 18" diameter bolt down man way, top mounted 10 Hp side and bottom scrape surface agitation, baffle, (2) CIP spray balls supplied by 2"OD / 1½"ID Tri-clamp fittings and thermowell. Dish bottom has 3½" OD / 3" ID center bottom pneumatic valve discharge with 30" ground clearence. Control panel with push button start / stop and variable speed control. Mounted on (4) legs with foot pads.
Nat’l Brd: 8617MAWP: 100 PSI @ 350°F (Jacket)MDMT: -20°F @ 100 PSI (Jacket)
DCI, 7,000 Gallon, 316 stainless steel, jacketed and insulated tank. Vessel Dimensions: 107" diameter x 184" straight wall. Equipped with dome top, slant bottom with bottom prop agitation powered by 2 Hp motor drive, 16" x 20" side manway with bolt down cover, (2) thermowells, CIP spray ball supplied by a 2½" OD / 2" ID Tri-Clamp, 3" OD vent line, 3" OD / 2½" ID Tri-clamp style bottom side inlet and bottom side discharge.
Jacket Access:(2) 2" SW Union Flange
MAWP: 150 PSI @ 100°FMDMT: -20°F @ 150 PSI
OAD: 138" L x 115" W x 242" H
DCI, 7,000 Gallon, 316L stainless steel, jacketed and insulated vessel. Vessel Dimensions: 107" ID / 114" OD: 184" straight wall. Equipped with dome top, 16" x 20" side bottom manway, side bottom prop agitation and slant bottom. Additionally features (2) thermowells, CIP spray ball supplied by a 2½" OD / 2" ID Tri-Clamp, 3" OD vent line, 3" OD / 2½" ID Tri-clamp style bottom side inlet and bottom side discharge.
Walker, 3,500 gallon capacity, 304 stainless steel jacketed process tank. Vessel dimensions: 82" diameter, 162" straight wall, with 14" x 20" manway. Equipped with side bolt down covers, top mounted 5 Hp sweep agitation, (2) thermo wells, (1) flush mounted sensor and (2) CIP spray balls supplied by a 3½"OD / 3" ID Tri-Clamp fitting. Slant bottom has 3" OD / 2½" ID bottom discharge with 30" ground clearence.
JacketMAWP: 100 PSI @ 250°FMDMT: -20°F @ 100 PSI
Top Ports:(1) 4½"OD / 4"ID Tri-Clamp(1) 3"OD / 3½"ID Tri-Clamp(1) 2"OD / 1½"ID Tri-Clamp
Jacket Ports:(8) 2" NPT
OAD: 188" L x 72" W x 226" H
Sign up for our newsletter to receive the latest in packaging tips, case studies and more.