Stay up to date with new inventory & industry news
Home » Stainless Steel Tank » Page 4
Frain Industries carries hundreds of used, stainless steel storage and processing tanks. Tanks vary greatly in their shape, size, and application. Frain stocks tanks ranging from 5 gallons to 10,000 gallons in many different configurations including: jacketed, single wall, vertical, horizontal, cone bottom, dish bottom, insulated, with or without agitation, CIP (clean in place), and many others. Additionally tanks can be made of multiple grades of stainless steel (typically 304 or 316/316L) with different levels of corrosion resistance.
Types of agitation available include: prop agitation, high sheer agitation, sweep agitation, dual agitation, emulsification, turbines, impellers, cage beaters, anchor paddles, gate paddles, and many others.
Jacket types include: conventional jackets, high pressure jackets, half-pipe coil jackets, multiple zone jackets, dimple jackets, and plate coils.
The Frain Industries engineering team can place you into a storage or processing tank solution for your application. If you are looking for a single tank or an integrated solution with automated fill and discharge options Frain has the equipment for your needs.
Frain Industries carries used tanks from many OEM’s including A&B Processing, Abec, Ace, Alfa Laval, Allegheny, American Process Systems, Apache, APV, APV Crepaco, B&G, CE Howard, Chem Tek, Cherry Burrell, Chester Jenson, Cream City, Crepaco, Dairy Craft, Damrow, DCI, Dover, Feldmeier, Groen, Highland, Howard, Langsenkamp, Lee, Letsch, Mueller, New Brunswick, Northland Stainless, Nova, Perma San, Perry, Pfaulder, Precision, Precision Stainless, Seitz Stainless, Walker, Willflow, and many others.
Walker, 3,500 gallon capacity, 304 stainless steel jacketed process tank. Vessel dimensions: 82" diameter, 162" straight wall, with 14" x 20" manway. Equipped with side bolt down covers, top mounted 5 Hp sweep agitation, (2) thermo wells, (1) flush mounted sensor and (2) CIP spray balls supplied by a 3½"OD / 3" ID Tri-Clamp fitting. Slant bottom has 3" OD / 2½" ID bottom discharge with 30" ground clearence.
JacketMAWP: 100 PSI @ 250°FMDMT: -20°F @ 100 PSI
Top Ports:(1) 4½"OD / 4"ID Tri-Clamp(1) 3"OD / 3½"ID Tri-Clamp(1) 2"OD / 1½"ID Tri-Clamp
Jacket Ports:(8) 2" NPT
OAD: 188" L x 72" W x 226" H
Nat’l Brd: 7525
Top Ports:(1) 4½"OD / 4"ID Tri-Clamp(1) 3"OD / 3½"ID Tri-Clamp(1) 2"OD / 1½"ID Tri-Clamp(1) 3" Top Side Vent(1) 3" Top Vent
Nat’l Brd: 7524
Waukesha, 600 gallon 304 S/S, supply tank, and pump system. Tank has 56" dia x 60" straight wall, flat top with cover, dish bottom with 2½" ID triclover center bottom discharge and 14" clearance. 4 leg unit mounted on a (48"L x 48"W) platform. Pump system consists of (3) Waukesha pumps (2) model 30, 30 gpm and (1) model 15, 15 gpm pumps all 316 S/S contact parts. Model 30’s have ¾ HP Baldor motor, 2" OD triclover inlet/outlets, and twin wing rotors, and O-Ring seals. Model15 has ½ HP Baldor motor, 1" OD triclover inlet/outets, twin wing rotors, and O-Ring seals. Pumps mounted on a S/S frame below tank. System would be ideally suited as supply tank to a time/pressure filler. Last used for metering product to MRM Versa filler.
OAD: 92"(L) x 48"(W) x 146"(H)
Waukesha, Supply tank and pump system consisting of a 500 gallon S/S tank and (3) Waukesha pumps (2) model 30 pumps and (1) model 15 pump). Tank is 43" ID x 46" straight wall, ½ HP Lightnin mixer (54"L x 1" dia) shaft and 3" dia. impeller. 2½" ID triclover center bottom discharge with 14" floor clearance. mounted on a (48"L x 48"W x 50"H) platform on casters for mobility. Model 30 pumps are 316 S/S positive displacement pumps capable of up to 30 GPM. Equipped with 3/4 HP Baldor motor, 2" OD triclover inlet/outlets, and twin wing rotors, and O-Ring seals. Model 015 pump is 316 S/S positive displacement pump capable of up to 15 GPM. Equipped with ½ HP Baldor motor, 1" OD triclover inlet/outets, twin wing rotors, and O-Ring seals. Pumps mounted on a S/S frame. System ideally suited as supply tank to a time/pressure filler.
OAD: 92"(L) x 48"(W) x 92"(H)
New Brunswick, model SF116 316 stainless steel, benchtop sterilize-in-place fermentor with a 7 liter vessel. Features an integral heating system to automatically sterilize the system, quick heat-up and cool-down, two-gas mixing, a sampling port, pH probe, dissolved oxygen probe, a galvanic probe, a polargraphic probe, agitation, sparger, recorder, dissolved oxygen controller, pH controller, and pump module. Equipped with illuminated 2 1/4"W by 11 1/2"H sight glass, 1 1/2" threaded O.D. port, and controls for agitation (on/off), vessel view lamp (on/off) agitation control, temperature set point (on/off), temperature control, sterilization temp control (on/off), main sparger, sparger steam, inlet filter condensate, drain steam, exhaust condensate, rapid cooling, main water, and cooling control. Veseel has a national board number of 158, and a max allowable working pressure of 35psi at 300F.
OAD: 30"L x 25"W x 33"H
Abec, 500 liter, 316 stainless steel, bioreactor / fermentor. Has 36" diameter x 36" side wall vessel rated to 40psig @ 280F, dimpled jacket rated at 50psig @ 350F, and S/S control panel with Valley Instrument controls. Vessel has .135" shell / head thickness, 32" head disc radius, shell made of 15 guage 304 S/S, 2 1/4" top sight glass, 2 1/4" side sight glass, side baffles, center bottom propeller agitation powered by Flender 8.31hp drive, urethane insulation, and tank mounted on four load cells with push buttonTranscell weight controller with LED display. Control panel has Seco DC drive controller; E-stop; control modules for air, O2 flow, pO2, speed, pH, and temperature; push button LED display; data recorder; pressure guages for backpressure, steam, air, O2, and cooling; and controls for cooling water, air, sparge, sparge condensate, temperature control steam, jacket steam, vessel backpressure, back pressure condensate, and jacket condensate. Mounted on stainless steel frame with height adjustable legs.
OAD: Vessel: 36"L x 36"W x 71"H Control Panel: 72"L x 34"W x 86"H
Ambesco Stainless Steel, 2000 Gallon, 304 stainless steel, single wall mixing tank. Vessel Dimensions: 78" diameter x 110" straight wall. Equipped with bridge mounted prop agitation powered by a 5 hp drive, flip up covers, (4) 6" wide fixed baffles and 2½"OD / 2"ID Tri-clamp style bottom discharge with 10" ground clearance.
Top Access:(3) 3½"OD / 3"ID Tri-Clamp(1) 2½"OD / 2"ID Tri-Clamp(1) 2"OD / 1½"ID Tri-Clamp
OAD: 86"L x 84"W x 148"H
Walker, Model HHT, 6000 Gallon, 316L Stainless steel, horizontal, jacketed, processing tank. Has vessel Dimensions of: 106" in Diameter; x 180" Straight wall. Equipped with 19" x 16" manway with bolt down cover, 3½"OD / 3" ID Tri-Clamp side inlet, top mounted (2) 3 Hp prop agitation and (3) CIP spray balls supplied by a 2"OD / 1½" ID Tri-Clamp fitting, 4" observation opening, thermowell, (2) top mounted paddle mixers and 3½"OD / 3" ID side discharge with 19" ground clearence. Mounted on (6) stainless steel legs and access ladder.
Jacket MAWP: 150 psi @ 300°FMDMT: -20°F @ 150
Side Access:(2) 1¼" NPT(1) 2" NPT
Nat’l Brd: 1421
OAD: 264" L x 120" W x 128" H
Walker, Model HHT, 6000 Gallon, 316L Stainless steel, horizontal, jacketed, processing tank. Has vessel Dimensions of: 106" in Diameter; x 180" Straight wall. Equipped with 19" x 16" manway with bolt down cover, 3½"OD / 3" ID Tri-Clamp side inlet, top mounted (2) 3 Hp prop agitation and (3) CIP spray balls supplied by a 2"OD / 1½" ID Tri-Clamp fitting, 4" observation opening, thermowell, (2) top mounted paddle mixers and 3½"OD / 3" ID discharge side with 19"ground clearence. Mounted on (6) stainless steel legs and access ladder.
Nat’l Brd: 1422
Mueller, 550 gallon 304 stainless steel jacketed dual agitation internal pressure rating of 20 psi @ 350F and 60psi @ 350F for the jacket. Features dome top with 20" manway, five 2" O.D. top ports for the vessel, and 2-1/2" sanitary center bottom discharge 2" above the ground. Jacket has (9) 3/4" threaded I.D. side ports, (2) 1" threaded O.D. threaded side ports. Mounted on 4 legs. Nation Board # 2046.
OAD: 60"L x 60"W x 96"H
Mueller, 550 gallon 304 stainless steel jacketed dual agitation internal pressure rating of 20 psi @ 350°F and 60psi @ 350°F for the jacket. Dual prop agitation. Dome top with 20" man way , 52" sidewall, 57" ID, multipile 2" inlet/outlets on top of vessel. Dish bottom with 2½" sanitary center bottom discharge 2½" above the ground. Mounted on 4 legs for stability.
Nat’l Brd: 2044
OAD: 96" H x 60" diameter
Sign up for our newsletter to receive the latest in packaging tips, case studies and more.