Stainless Steel Tank Machines

Waukesha Tank SS Single Wall 50O GAL

• Manufacturer: Waukesha
• Model Number: 50O GAL
• Frain Number: 5D7467

Waukesha, 600 gallon 304 S/S, supply tank, and pump system. Tank has 56" dia x 60" straight wall, flat top with cover, dish bottom with 2½" ID triclover center bottom discharge and 14" clearance. 4 leg unit mounted on a (48"L x 48"W) platform. Pump system consists of (3) Waukesha pumps (2) model 30, 30 gpm and (1) model 15, 15 gpm pumps all 316 S/S contact parts. Model 30’s have ¾ HP Baldor motor, 2" OD triclover inlet/outlets, and twin wing rotors, and O-Ring seals. Model15 has ½ HP Baldor motor, 1" OD triclover inlet/outets, twin wing rotors, and O-Ring seals. Pumps mounted on a S/S frame below tank. System would be ideally suited as supply tank to a time/pressure filler. Last used for metering product to MRM Versa filler.

OAD: 92"(L) x 48"(W) x 146"(H)

Waukesha Tank SS Single Wall 500 GAL

• Manufacturer: Waukesha
• Model Number: 500 GAL
• Frain Number: 5D7462

Waukesha, Supply tank and pump system consisting of a 500 gallon S/S tank and (3) Waukesha pumps (2) model 30 pumps and (1) model 15 pump). Tank is 43" ID x 46" straight wall, ½ HP Lightnin mixer (54"L x 1" dia) shaft and 3" dia. impeller. 2½" ID triclover center bottom discharge with 14" floor clearance. mounted on a (48"L x 48"W x 50"H) platform on casters for mobility. Model 30 pumps are 316 S/S positive displacement pumps capable of up to 30 GPM. Equipped with 3/4 HP Baldor motor, 2" OD triclover inlet/outlets, and twin wing rotors, and O-Ring seals. Model 015 pump is 316 S/S positive displacement pump capable of up to 15 GPM. Equipped with ½ HP Baldor motor, 1" OD triclover inlet/outets, twin wing rotors, and O-Ring seals. Pumps mounted on a S/S frame. System ideally suited as supply tank to a time/pressure filler.

OAD: 92"(L) x 48"(W) x 92"(H)

New Brunswick Tank Fermentor 1.85 GAL

• Manufacturer: New Brunswick
• Model Number: 1.85 GAL
• Frain Number: 5D7441

New Brunswick, model SF116 316 stainless steel, benchtop sterilize-in-place fermentor with a 7 liter vessel. Features an integral heating system to automatically sterilize the system, quick heat-up and cool-down, two-gas mixing, a sampling port, pH probe, dissolved oxygen probe, a galvanic probe, a polargraphic probe, agitation, sparger, recorder, dissolved oxygen controller, pH controller, and pump module. Equipped with illuminated 2 1/4"W by 11 1/2"H sight glass, 1 1/2" threaded O.D. port, and controls for agitation (on/off), vessel view lamp (on/off) agitation control, temperature set point (on/off), temperature control, sterilization temp control (on/off), main sparger, sparger steam, inlet filter condensate, drain steam, exhaust condensate, rapid cooling, main water, and cooling control. Veseel has a national board number of 158, and a max allowable working pressure of 35psi at 300F.

OAD: 30"L x 25"W x 33"H

Abec Tank Fermentor 132 GAL

• Manufacturer: Abec
• Model Number: 132 GAL
• Frain Number: 5D8051

Abec, 500 liter, 316 stainless steel, bioreactor / fermentor. Has 36" diameter x 36" side wall vessel rated to 40psig @ 280F, dimpled jacket rated at 50psig @ 350F, and S/S control panel with Valley Instrument controls. Vessel has .135" shell / head thickness, 32" head disc radius, shell made of 15 guage 304 S/S, 2 1/4" top sight glass, 2 1/4" side sight glass, side baffles, center bottom propeller agitation powered by Flender 8.31hp drive, urethane insulation, and tank mounted on four load cells with push buttonTranscell weight controller with LED display. Control panel has Seco DC drive controller; E-stop; control modules for air, O2 flow, pO2, speed, pH, and temperature; push button LED display; data recorder; pressure guages for backpressure, steam, air, O2, and cooling; and controls for cooling water, air, sparge, sparge condensate, temperature control steam, jacket steam, vessel backpressure, back pressure condensate, and jacket condensate. Mounted on stainless steel frame with height adjustable legs.

OAD: Vessel: 36"L x 36"W x 71"H
Control Panel: 72"L x 34"W x 86"H

Tank SS Single Wall 2000 GAL

• Model Number: 2000 GAL
• Frain Number: 5H3882

Ambesco Stainless Steel, 2000 Gallon, 304 stainless steel, single wall mixing tank. Vessel Dimensions: 78" diameter x 110" straight wall. Equipped with bridge mounted prop agitation powered by a 5 hp drive, flip up covers, (4) 6" wide fixed baffles and 2½"OD / 2"ID Tri-clamp style bottom discharge with 10" ground clearance, discharge connects to tank via a 2½" NPT with 15½" ground clearance.

Top Access:
(3) 3½"OD / 3"ID Tri-Clamp
(1) 2½"OD / 2"ID Tri-Clamp
(1) 2"OD / 1½"ID Tri-Clamp

OAD: 86"L x 84"W x 148"H

Walker Tank Processors HHT

• Manufacturer: Walker
• Model Number: HHT
• Frain Number: 5J1471

Walker, Model HHT, 6000 Gallon, 316L Stainless steel, horizontal, jacketed, processing tank. Has vessel Dimensions of: 106" in Diameter; x 180" Straight wall. Equipped with 19" x 16" manway with bolt down cover, 3½"OD / 3" ID Tri-Clamp side inlet, top mounted (2) 3 Hp prop agitation and (3) CIP spray balls supplied by a 2"OD / 1½" ID Tri-Clamp fitting, 4" observation opening, thermowell, (2) top mounted paddle mixers and 3½"OD / 3" ID side discharge with 19" ground clearence. Mounted on (6) stainless steel legs and access ladder.

Jacket
MAWP: 150 psi @ 300°F
MDMT: -20°F @ 150

Side Access:
(2) 1¼" NPT
(1) 2" NPT

Nat’l Brd: 1421

OAD: 264" L x 120" W x 128" H

Walker Tank SS JKT HHT

• Manufacturer: Walker
• Model Number: HHT
• Frain Number: 5J1470

Walker, Model HHT, 6000 Gallon, 316L Stainless steel, horizontal, jacketed, processing tank. Has vessel Dimensions of: 106" in Diameter; x 180" Straight wall. Equipped with 19" x 16" manway with bolt down cover, 3½"OD / 3" ID Tri-Clamp side inlet, top mounted (2) 3 Hp prop agitation and (3) CIP spray balls supplied by a 2"OD / 1½" ID Tri-Clamp fitting, 4" observation opening, thermowell, (2) top mounted paddle mixers and 3½"OD / 3" ID discharge side with 19"ground clearence. Mounted on (6) stainless steel legs and access ladder.

Jacket
MAWP: 150 psi @ 300°F
MDMT: -20°F @ 150

Side Access:
(2) 1¼" NPT
(1) 2" NPT

Nat’l Brd: 1422

OAD: 264" L x 120" W x 128" H

Mueller Tank Processors 550 GAL

• Manufacturer: Mueller
• Model Number: 550 GAL
• Frain Number: 5D3775

Mueller, 550 gallon 304 stainless steel jacketed dual agitation internal pressure rating of 20 psi @ 350F and 60psi @ 350F for the jacket. Features dome top with 20" manway, five 2" O.D. top ports for the vessel, and 2-1/2" sanitary center bottom discharge 2" above the ground. Jacket has (9) 3/4" threaded I.D. side ports, (2) 1" threaded O.D. threaded side ports. Mounted on 4 legs. Nation Board # 2046.

OAD: 60"L x 60"W x 96"H

Mueller Tank Processors 550 GAL

• Manufacturer: Mueller
• Model Number: 550 GAL
• Frain Number: 5D3773

Mueller, 550 gallon 304 stainless steel jacketed dual agitation internal pressure rating of 20 psi @ 350°F and 60psi @ 350°F for the jacket. Dual prop agitation. Dome top with 20" man way , 52" sidewall, 57" ID, multipile 2" inlet/outlets on top of vessel. Dish bottom with 2½" sanitary center bottom discharge 2½" above the ground. Mounted on 4 legs for stability.

Nat’l Brd: 2044

OAD: 96" H x 60" diameter

Crepaco Tank Processors 300 GAL

• Manufacturer: Crepaco
• Model Number: 300 GAL
• Frain Number: 5D3272

Crepaco, 300 gallon 316 stainless steel jacketed mix tank. 50" ID x 39" straight wall. Dome top has a 18"diameter man way.with sweep agitation, side baffle and CIP spray ball. Fully dimpled side / bottom low pressure jacket. Cone bottom with 3" center bottom discharge equipped with manual ball valve, and a 34½" discharge height. Mounted on (4) stainless steel legs. Equipped with Dodge Hydraulic Motor.

OAD: 54" L x 54" W x 130" H

Pfaudler Robbins Meyers Tank Reactor SS 20 GAL

• Manufacturer: Pfaudler Robbins Meyers
• Model Number: 20 GAL
• Frain Number: 5D3150

Pfaudler, 20 gallon, 316 S/S reactor, 20" diameter x 20" straight wall. Dome top, with ¾ hp top mounted anchor style agitator. Internal working pressure 30 psi @ 700°F and Full jacket working pressure of 25 psi. @ 650°F with vacuum pressure gauge up to 29 HG. with (1) 1-3/4" inlet, 4" diameter sight glass on top of vessel, (1) ¾" in / outlet port on the side and (1) ¾" bottom in / outlets for jacket. Dish bottom has 3" diameter center bottom discharge with 10" floor clearance and bottom thermocouple.

OAD: 62" H x 36" W x 34" L

Pfaudler Robbins Meyers Tank Reactor GL 30 GAL

• Manufacturer: Pfaudler Robbins Meyers
• Model Number: 30 GAL
• Frain Number: 5D4592

Pfaudler, 30 Gallon glass lined tank. Features 316 S/S with a MAWP of 25 psi/FV. Equipped with four top inlets of 1½", (2) 4" sight ports and 2" sanitary bottom discharge measuring 14" from floor. Mounted on casters. MODEL PC-20-30-25

Nat’l Brd: 47937

OAD: 38" L x 36" W x 56" H