Stainless Steel Processor Machines
Used Stainless Steel Processor Equipment
Tank Processors are tanks that are used for processing materials which usually are made of Stainless Steel and are fully jacketed and insulated with agitators and are designed for complete drainage of the products. Processing tanks are usually dished top and bottoms and may have Clean in Place capability. Processing tanks have a variety of agitation for simple mixers to triple motion agitators and full scrapping of the product from the walls and the bottom.
Related Categories
Stainless Steel Processor Equipment In Stock
Feldmeier Tank Processors 3000JKT
- Manufacturer: Feldmeier
- Model Number: 3000JKT
- Frain Number: R37298
Feldmeier, 3000 gallon capacity, stainless steel jacketed and insulated process tank. 304 stainless steel contact parts and 304 stainless steel jacket and exteroir parts. Vessel dimensions: 72" diameter with 166" straight wall. Equipped with dome top, 18" diameter bolt down man way, top mounted 10 Hp side and bottom scrape surface agitation, baffle, (2) CIP spray balls supplied by 2"OD / 1½"ID Tri-clamp fittings and thermowell. Dish bottom has 3½" OD / 3" ID center bottom pneumatic valve discharge with 25" ground clearence. Control panel with push button start / stop and variable speed control. Mounted on (4) legs with foot pads.
Nat’l Brd: 9619
MAWP: 150 PSI @ 350°F (Jacket)
MDMT: -20°F @ 100 PSI (Jacket)
MAWP: 10 PSI @ 165°F (Vessel)
MDMT: -20°F @ 10 PSI (Vessel)
Top Ports:
(1) 6" ID sanitary clamp covered vent
(1) 4¾"OD / 4"ID Tri-Clamp
(3) 2½"OD / 2"ID Tri-Clamp
Jacket Ports:
(8) 1½" NPT
OAD: 80" L x 80" W x 257" H
Get a Free Quote Call: 630-629-9900
Crepaco Tank Processors 700 GALLON
- Manufacturer: Crepaco
- Model Number: 700 GALLON
- Frain Number: R37291
Crepaco, 700 gallon capacity, 304 Stainless Steel jacketed and insulated process tank. Vessel dimensions: 66" diameter with 48" straight wall. Equipped with lift up / clamp down cover, top mounted dixie mixer agitation and (1) CIP spray balls supplied by 2½"OD / 2"ID Tri-clamp fittings. Dish bottom has 2½" OD / 2" ID bottom discharge with 12" ground clearence.
Top Ports:
(3) 2½"OD / 2"ID Tri-Clamp
(1) 3"OD / 2½"ID Tri-Clamp
(1) 2½" open vent
MAWP: 50 PSI
Jacket Ports:
(4) 1½" NPT
OAD: 75" L x 75" W x 125" H
Get a Free Quote Call: 630-629-9900
Hubert Tank Processors 250GAL
- Manufacturer: Hubert
- Model Number: 250GAL
- Frain Number: 5H1327
250 gallon, 304 stainless steel, ¼ low pressure jacketed tank. Vessel dimensions: 45" diameter with 39" straight wall. Equipped with flip up cover and (2) 8" diameter prop style agitator. Slant bottom discharges. Mounted on a stainless steel base.
Top Access:
(2) 2½"OD / 2"ID Tri-Clamp
(1) 2"OD / 1½"ID Tri-Clamp
Jacket Access:
(1) ¾" NPT
(1) ½" NPT
OAD: 64"L x 50"W x 57"H
Get a Free Quote Call: 630-629-9900
APV Crepaco Tank Processors 3000 GAL
- Manufacturer: APV Crepaco
- Model Number: 3000 GAL
- Frain Number: R37531
APV, 3,000 gallon capacity, 304 stainless steel jacketed process tank. Vessel dimensions: 120" diameter x 96" deep with a 53" straight wall and cone bottom. Equipped with a 18" diameter man way with flip bolt down cover, (2) CIP spray balls supplied by a 3½"OD / 3" ID Tri-clamp fitting, 5 / 10 Hp top mounted sweep agitator and 3½" OD / 3" ID Tri-clamp style bottom discharge with 12" ground clearance. Mounted on (5) tube legs.
Top Ports:
(2) 2½" OD / 2" ID Tri-clamp
(1) 3½" OD / 3" ID Tri-clamp
Jacket Ports:
(2) 2" NPT
MAWP: 75 PSI @ 400°F
OAD: 128"L x 130"W x 160"H
Get a Free Quote Call: 630-629-9900
APV Crepaco Tank Processors 3000 GAL
- Manufacturer: APV Crepaco
- Model Number: 3000 GAL
- Frain Number: R37532
APV, 3,000 gallon capacity, 304 stainless steel jacketed process tank. Vessel dimensions: 120" diameter x 96" deep with a 53" straight wall and cone bottom. Equipped with a 18" diameter man way with flip bolt down cover, (2) CIP spray balls supplied by a 3½"OD / 3" ID Tri-clamp fitting, 5 / 10 Hp top mounted sweep agitator and 3½" OD / 3" ID Tri-clamp style bottom discharge with 12" ground clearance. Mounted on (5) tube legs.
Top Ports:
(2) 2½" OD / 2" ID Tri-clamp
(1) 3½" OD / 3" ID Tri-clamp
Jacket Ports:
(2) 2" NPT
MAWP: 75 PSI @ 400°F
OAD: 128"L x 130"W x 173"H
Get a Free Quote Call: 630-629-9900
APV Crepaco Tank Processors 3000 GAL
- Manufacturer: APV Crepaco
- Model Number: 3000 GAL
- Frain Number: R37530
APV, 3,000 gallon capacity, 304 stainless steel jacketed process tank. Vessel dimensions: 120" diameter x 96" deep with a 53" straight wall and cone bottom. Equipped with a 18" diameter man way with flip bolt down cover, (2) CIP spray balls supplied by a 3½"OD / 3" ID Tri-clamp fitting, 5 / 10 Hp top mounted sweep agitator and 3½" OD / 3" ID Tri-clamp style bottom discharge with 12" ground clearance. Mounted on (5) tube legs.
Top Ports:
(2) 2½" OD / 2" ID Tri-clamp
(1) 3½" OD / 3" ID Tri-clamp
Jacket Ports:
(2) 2" NPT
MAWP: 75 PSI @ 400°F
OAD: 128"L x 130"W x 160"H
Get a Free Quote Call: 630-629-9900
DCI Tank Processors 2500 GAL
- Manufacturer: DCI
- Model Number: 2500 GAL
- Frain Number: R37527
DCI, 2,500 gallon capacity, 316 stainless steel jacketed and insulated process tank. Vessel dimensions: 96" diameter, 88" straight wall, with a 18"ID manway. Equipped with lift up / bolt down covers, top mounted 5 / 2½ HP bottom sweep agitation and (2) CIP spray balls supplied by a 3½"OD / 3" ID Tri-Clamp fitting. Slant bottom has 3½" OD / 3" ID bottom discharge with 8" ground clearence.
MAWP: 75 PSI @ 320°F
Top Ports:
(1) 3½"OD / 3"ID Tri-Clamp
Jacket Ports:
(6) 1½" NPT
OAD: 125" L x 110" W x 146" H
Get a Free Quote Call: 630-629-9900
APV Tank Processors 1700 GAL
- Manufacturer: APV
- Model Number: 1700 GAL
- Frain Number: R37521
APV, 1700 gallon capacity, 304 stainless steel jacketed process tank. Vessel dimensions: 84" diameter x 72" deep with a 60" straight wall and dish bottom. Equipped with a 18" diameter man way with flip clamp down cover, (2) CIP spray balls supplied by a 2"OD / 1½" ID Tri-clamp fitting, top mounted sweep agitator and 4" OD / 3½" ID Tri-clamp style bottom discharge with 10" ground clearance. Mounted on (5) tube legs.
Top Ports:
(1) 3" OD / 2½" ID Tri-clamp
Jacket Ports:
(4) 1¾" NPT
MAWP JKT: 50 PSI @ 400°F
OAD: 96"L x 88"W x 135"H
Get a Free Quote Call: 630-629-9900
Feldmeier Tank Processors 7500JKT
- Manufacturer: Feldmeier
- Model Number: 7500JKT
- Frain Number: R37297
Feldmeier, 7500 gallon capacity, stainless steel jacketed and insulated process tank. 304 stainless steel contact parts and 304 stainless steel jacket and exteroir parts. Vessel dimensions: 120" diameter with 144" straight wall. Equipped with dome top, 18" diameter bolt down man way, top mounted 10 Hp side and bottom scrape surface agitation, baffle, (2) CIP spray balls supplied by 2"OD / 1½"ID Tri-clamp fittings and thermowell. Dish bottom has 3½" OD / 3" ID center bottom pneumatic valve discharge with 30" ground clearence. Control panel with push button start / stop and variable speed control. Mounted on (4) legs with foot pads.
Nat’l Brd: 8580
MAWP: 100 PSI @ 350°F (Jacket)
MDMT: -20°F @ 100 PSI (Jacket)
MAWP: 10 PSI @ 165°F (Vessel)
MDMT: -20°F @ 10 PSI (Vessel)
Top Ports:
(1) 6" ID sanitary clamp covered vent
(1) 4¾"OD / 4"ID Tri-Clamp
(4) 2½"OD / 2"ID Tri-Clamp
Jacket Ports:
(4) 1½" NPT
OAD: 130" L x 130" W x 262" H
Get a Free Quote Call: 630-629-9900
Feldmeier Tank Processors 7500JKT
- Manufacturer: Feldmeier
- Model Number: 7500JKT
- Frain Number: R37294
Feldmeier, 7500 gallon capacity, stainless steel jacketed and insulated process tank. 304 stainless steel contact parts and 304 stainless steel jacket and exteroir parts. Vessel dimensions: 120" diameter with 144" straight wall. Equipped with dome top, 18" diameter bolt down man way, top mounted 10 Hp side and bottom scrape surface agitation, baffle, (2) CIP spray balls supplied by 2"OD / 1½"ID Tri-clamp fittings and thermowell. Dish bottom has 3½" OD / 3" ID center bottom pneumatic valve discharge with 30" ground clearence. Control panel with push button start / stop and variable speed control. Mounted on (4) legs with foot pads.
Nat’l Brd: 8613
MAWP: 100 PSI @ 350°F (Jacket)
MDMT: -20°F @ 100 PSI (Jacket)
MAWP: 10 PSI @ 165°F (Vessel)
MDMT: -20°F @ 10 PSI (Vessel)
Top Ports:
(1) 6" ID sanitary clamp covered vent
(1) 4¾"OD / 4"ID Tri-Clamp
(4) 2½"OD / 2"ID Tri-Clamp
Jacket Ports:
(4) 1½" NPT
OAD: 130" L x 130" W x 262" H
Get a Free Quote Call: 630-629-9900
Feldmeier Tank Processors 7500JKT
- Manufacturer: Feldmeier
- Model Number: 7500JKT
- Frain Number: R37295
Feldmeier, 7500 gallon capacity, stainless steel jacketed and insulated process tank. 304 stainless steel contact parts and 304 stainless steel jacket and exteroir parts. Vessel dimensions: 120" diameter with 144" straight wall. Equipped with dome top, 18" diameter bolt down man way, top mounted 10 Hp side and bottom scrape surface agitation, baffle, (2) CIP spray balls supplied by 2"OD / 1½"ID Tri-clamp fittings and thermowell. Dish bottom has 3½" OD / 3" ID center bottom pneumatic valve discharge with 30" ground clearence. Control panel with push button start / stop and variable speed control. Mounted on (4) legs with foot pads.
Nat’l Brd: 9620
MAWP: 150 PSI @ 350°F (Jacket)
MDMT: -20°F @ 150 PSI (Jacket)
MAWP: 10 PSI @ 350°F (Vessel)
MDMT: -20°F @ 10 PSI (Vessel)
3A
Top Ports:
(1) 6" ID sanitary clamp covered vent
(1) 4¾"OD / 4"ID Tri-Clamp
(4) 2½"OD / 2"ID Tri-Clamp
Jacket Ports:
(6) 1½" NPT
OAD: 130" L x 130" W x 262" H
Get a Free Quote Call: 630-629-9900
Mueller Tank Processors 1000 GAL
- Manufacturer: Mueller
- Model Number: 1000 GAL
- Frain Number: 5J0812
Mueller, 1000 gallon capacity, 316 stainless steel jacketed process tank. Vessel dimensions: 57" ID; 97" straight wall. Equipped with lift up covers, 5 Hp top mounted side scrape / bottom sweep agitator, bottom side 3"OD / 2½"ID sanitary discharge with 10" ground clearance.
Jacket Ports:
(4) ½" NPT
(2) 1½" NPT
MAWP: 150 PSI
OAD: 60"L x 60"W x 132"H
Get a Free Quote Call: 630-629-9900