See us at the PMCA Show in Lancaster, PA on 4/15
Home » Stainless Steel Tank » Stainless Steel Processor » Page 8
Tank Processors are tanks that are used for processing materials which usually are made of Stainless Steel and are fully jacketed and insulated with agitators and are designed for complete drainage of the products. Processing tanks are usually dished top and bottoms and may have Clean in Place capability. Processing tanks have a variety of agitation for simple mixers to triple motion agitators and full scrapping of the product from the walls and the bottom.
Stricklin, 180 gallon, 304 stainless steel, jacketed and insulated, internal vacuum tank. Vessel dimensions: 47" diameter x 42" deep with a 36" straight wall. Equipped with flip up covers, bridge mounted sweep agitation and 3"OD / 2½"ID Tri-Clamp style discharge with 41" ground clearance. Mounted on (3) tubular legs.
Jacket Ports: (3) 1" NPT
OAD: 55"L x 52"W x 122"H
Mueller, 500 Liter, 316 stainless steel jacketed process tank. Vessel dimensions: 36" ID x 36" deep with 28" straight wall. Equipped with an 8" diameter bolt down manway with sight glass, (1) thermowell, 5 Hp top mounted scrape agitator and 2½" OD / 2" ID tri-clamp style bottom center discharge with 7" ground clearance. Mounted on a stainless steel (4) leg base with casters and Mettler Toledo load cells.
Top Ports:(3) 2½"OD / 2"ID Tri-Clamp(2) 4½"OD / 4"ID Tri-Clamp
Jacket Ports: (2) 1½" NPT
Jacket:MAWP: 100 PSI/FV @ 250°FMDMT: -20°F @ 100 PSI/FV
Nat’l Brd: 52019
OAD: 55"L x 48"W x 78"H
Nat’l Brd: 52018
Holloway America, 850 Liter, 316L stainless steel jacketed process tank. Vessel dimensions: 45" ID x 36" deep with 32" straight wall. Equipped with an 18" diameter bolt down manway, (2) CIP spray ball supplied by a 2"OD / 1½"ID Tri-Clamp fitting, (1) thermowells, ½ Hp top mounted dual prop agitator and 2" OD / 1½" ID tri-clamp style bottom center discharge with 19" ground clearance. Mounted on (3) leg stainless steel frame.
Top Ports:(1) 3½"OD / 3"ID Tri-Clamp(5) 2"OD / 1½"ID Tri-Clamp
Side Ports:(1) 3½"OD / 3"ID Tri-Clamp
Jacket Ports: (2) ¾" NPT
Vessel:MAWP: 50 PSI @ 300°F MDMT: -20 °F @ 50 PSI
Jacket:MAWP: 100 PSI/FV @ 300°FMDMT: -20°F @ 100 PSI/FV
Nat’l Brd: 497
OAD: 55"L x 52"W x 77"H
Walker, 150 gallon capacity, 316L stainless steel jacketed / insulated process tank, with gallons of product per hour – depending on materials and application. Vessel dimensions: 46" diameter x 32" deep with 24" straight wall. Equipped with 18" diameter bolt down man way, 2 Hp top mounted scrape agitator, Thermowell, 6" wide fixed baffle and 3" OD / 2.5" ID Tri-clamp style bottom discharge with 24" ground clearance. Mounted on (4) stainless steel legs.
Top Ports:(1) 2½"OD / 2"ID Tri-clamp(1) 3"OD / 2½ID Tri-clamp(1) 3½"OD / 3"ID Tri-clampJacket Ports: (4) 2"OD / 1½"ID Tri-clamp
MAWP: 150 PSI @ 338°FMDMT: -20°F @ 150 PSINat’l Brd: 6579
OAD: 51"L x 49"W x 87"H
Feldmeier, 4500 Litre or 1125 gallon capacity, 316 stainless steel 3-zone jacketed process tank. Vessel dimensions: 76" ID x 82" deep with 51" straight wall. Equipped with a dome top, slant bottom, (1) 20" diameter top entry hinged man way, (2) thermowells, 2 Hp top mounted 27" diameter prop agitator and 2½" OD / 2" ID tri-clamp style bottom center discharge with a 12" ground clearance.
Top Ports:(3) 3½"OD / 3"ID Tri-Clamp(2) 2½"OD / 2"ID Tri-Clamp(5) 2"OD / 1½"ID Tri-Clamp
Jacket Ports: (8) ¾" NPT
Vessel:MAWP: 25 PSI @ 176°F MDMT: -22 °F @ 25 PSI
Jacket:MAWP: 50 PSI/FV @ 176°FMDMT: -22°F @ 50 PSI/FV
Nat’l Brd: 2684
OAD: 88"L x 82"W x 120"H
Feldmeier, 4500 Litre or 1125 gallon capacity, 316 stainless steel 3-zone jacketed process tank. Vessel dimensions: 76" ID x 82" deep with 51" straight wall. Equipped with a dome top, dish bottom, (1) 20" diameter top entry hinged man way, (2) thermowells, 3 Hp top mounted 27" diameter prop agitator and 2½" OD / 2" ID tri-clamp style bottom center discharge with 12" ground clearance.
Nat’l Brd: 2687
Walker, 150 gallon capacity, 316L stainless steel jacketed / insulated process tank, with gallons of product per hour – depending on materials and application. Vessel dimensions: 46" diameter x 32" deep with 24" straight wall. Equipped with 18" diameter bolt down man way, 2 Hp top mounted scrape agitator, Thermowell, 6" wide fixed baffle and 3" OD / 2.5" ID Tri-clamp style bottom discharge with 24" ground clearance.
Top Ports:(1) 3½"OD / 3"ID Tri-clamp(1) 3"OD / 2½"ID Tri-clamp(1) 2½"OD / 2"ID Tri-clamp
Jacket Ports:(4) 2"OD / 1½"ID Tri-clamp
MAWP: 150 PSI @ 338°FMDMT: -20°F @ 150 PSINational Board: 6578
Highland, 100 gallon, 316 stainless steel full jacketed mixing tank. Vessel Dimensions: 32" diameter x 32" deep. Equipped with a bridge mounted side and bottom scrape surface agitator powered by 3 Hp drive, flush mounted sensor and 3" OD / 2½"ID center bottom discharge with15" ground clearance. Mounted on (4) stainless steel tubular legs.
Top Fittings:(2) 3"OD / 2½"ID Tri-Clamp
Jacket Fittings:(2) 1" NPT
MAWP: 55 PSI @ 300° F
OAD: 38" L x 35" W x 80" H
Stainless & Steel Products Co., 50 gallon capacity, 304 stainless steel jacketed process tank. Vessel dimensions: 17¾" diameter with 48" straight wall. Equipped with (4) 1½" wide x 30" long fixed baffles, (1) thermowell, bottom liquid injection ring supplied by a ½" npt connection and top mounted high shear emulsifier.Ross, Model ME 510, stainless steel, high shear emulsifier. Equipped with a top mounted 10 hp / 3500 rpm drive, (7/8)" slotted disintegrating head and optional downthrust shaft propeller.Vessel and mixer mounted on a base with a 2" NPT bottom drain and 22" ground clearance.
Top Side Ports:(1) ¾" NPT(1) ½" NPT(1) ¼" NPT
Bottom Side Ports:(1) 1¼" NPT(1) ½" NPT
Jacket Ports: (3) ¾" NPT
MAWP: 40PSI / FV (Vessel)MAWP: 50 PSI @ 300°F (Jacket)
OAD: 56"L x 36"W x 106"H
Walker, 200 gallon capacity, 304 stainless steel 3-zone jacketed process tank. Vessel dimensions: 54" diameter with 21" straight wall. Equipped with lift up covers, cone bottom, (2) thermowells, 3/1½ Hp top mounted scrape agitator and 3½" OD / 2¾" ID tri-clamp style bottom discharge with 15" ground clearance.
Top Ports:(2) 2½"OD / 2"ID Tri-Clamp(1) 1½" NPT
Jacket Ports: (6) 1½" NPT
MAWP: 75 PSI @ 250°FMDMT: -20°F @ 75 PSINat’l Brd: 2892
OAD: 64"L x 52"W x 72"H
Crepaco, 2,000 gallon capacity, 304 stainless steel jacketed mixing tank. Vessel dimensions: 84" Diameter; 90" Straight Wall. Equipped with dome top,18" diameter top manway with flip up cover, (2) thermowells, 3 Hp bridge mounted sweep agitator and slant bottom with 2½" OD / 2" ID Tri-clamp side bottom discharge with 9" floor clearance.
MAWP: 50 PSI
Jacket Ports: (2) 2" NPT
Top Ports:(1) 5"OD / 4"ID Tri-Clamp(1) 3"OD / 2¼"ID Seated Bevel(1) 2½"OD / 1¾"ID Seated Bevel(3) 2"OD / 1¼"ID Seated Bevel(1) 2" Open Vent(2) 2" NPT
OAD: 96"L x 96"W x 145"H
Sign up for our newsletter to receive the latest in packaging tips, case studies and more.