See us at the PMCA Show in Lancaster, PA on 4/15
Home » Stainless Steel Tank » Stainless Steel Single Wall » Page 2
Tank SS Single Wall is a classification of tanks fabricated from stainless steel but lack no insulation or jackets for heat transfer. SS single wall tanks may have agitators and these can be from simple propellers to fully scraped or bottom swept agitators.
DCI Stainless, 5,000 Gallon, 316L stainless steel, single wall tank. Vessel Dimensions: 107" diameter x 166" deep with a 124" straight wall. Equipped with dome top, 3½"OD / 3"ID Tri-Clamp infeed, 6"OD vent, 18½" ID top latch down manway / 16" x 20" side bolt down manway and 3½"OD / 3"ID Tri-clamp fitting discharge with 18" ground clearance.
Top Access:(1) 2"OD / 1½"ID Tri-clamp (1) 2½"OD / 2"ID Tri-Clamp
OAD: 115"L x 115"W x 180"H
390 gallon, 304 stainless steel tank. Vessel Dimensions: 66" diameter with a 38" straight wall. Equipped with a 20" diameter manway, sweep agitation powered by a 1 hp drive, (1) CIP spray ball supplied by a 2½"OD / 2"ID Tri-Clamp fitting and 2½"OD / 2"ID Tri-Clamp bottom discharge with 12" ground clearance.
Top Access:(2) 2½"OD / 2"ID Seated Bevel(1) 2½"OD / 2"ID Tri-Clamp
OAD: 73"L x 70"W x 84"H
390 gallon, 304 stainless steel tank. Vessel Dimensions: 66" diameter with a 38" straight wall. Equipped with a 20" diameter manway, sweep agitation powered by a 1 hp drive, (1) CIP spray ball supplied by a 2½"OD / 2"ID Tri-Clamp fitting and 2½"OD / 2"ID Tri-Clamp bottom discharge with 9" ground clearance.
Top Access:(3) 2½"OD / 2"ID Seated Bevel
OAD: 73"L x 70"W x 78"H
Waukesha, 600 gallon 304 S/S, supply tank, and pump system. Tank has 56" dia x 60" straight wall, flat top with cover, dish bottom with 2½" ID triclover center bottom discharge and 14" clearance. 4 leg unit mounted on a (48"L x 48"W) platform. Pump system consists of (3) Waukesha pumps (2) model 30, 30 gpm and (1) model 15, 15 gpm pumps all 316 S/S contact parts. Model 30’s have ¾ HP Baldor motor, 2" OD triclover inlet/outlets, and twin wing rotors, and O-Ring seals. Model15 has ½ HP Baldor motor, 1" OD triclover inlet/outets, twin wing rotors, and O-Ring seals. Pumps mounted on a S/S frame below tank. System would be ideally suited as supply tank to a time/pressure filler. Last used for metering product to MRM Versa filler.
OAD: 92"(L) x 48"(W) x 146"(H)
Waukesha, Supply tank and pump system consisting of a 500 gallon S/S tank and (3) Waukesha pumps (2) model 30 pumps and (1) model 15 pump). Tank is 43" ID x 46" straight wall, ½ HP Lightnin mixer (54"L x 1" dia) shaft and 3" dia. impeller. 2½" ID triclover center bottom discharge with 14" floor clearance. mounted on a (48"L x 48"W x 50"H) platform on casters for mobility. Model 30 pumps are 316 S/S positive displacement pumps capable of up to 30 GPM. Equipped with 3/4 HP Baldor motor, 2" OD triclover inlet/outlets, and twin wing rotors, and O-Ring seals. Model 015 pump is 316 S/S positive displacement pump capable of up to 15 GPM. Equipped with ½ HP Baldor motor, 1" OD triclover inlet/outets, twin wing rotors, and O-Ring seals. Pumps mounted on a S/S frame. System ideally suited as supply tank to a time/pressure filler.
OAD: 92"(L) x 48"(W) x 92"(H)
Ambesco Stainless Steel, 2000 Gallon, 304 stainless steel, single wall mixing tank. Vessel Dimensions: 78" diameter x 110" straight wall. Equipped with bridge mounted prop agitation powered by a 5 hp drive, flip up covers, (4) 6" wide fixed baffles and 2½"OD / 2"ID Tri-clamp style bottom discharge with 10" ground clearance.
Top Access:(3) 3½"OD / 3"ID Tri-Clamp(1) 2½"OD / 2"ID Tri-Clamp(1) 2"OD / 1½"ID Tri-Clamp
OAD: 86"L x 84"W x 148"H
Dairy Craft, 1500 gallon, 304 S/S, single wall insulated tank. 72" dia x 99" straight wall, dome top with 0.6 hp prop agitation and (1) 2" (1) 4" dia top ports. Single wall with full side insulation, and side bottom 19" L x 16" W ID man way with flip out bolt down cover, and temp gauge from 0 -240 deg f. Slant bottom with a 2 1/2" OD end bottom discharge with butterfly valve and 12" floor clearance, and a 3 1/2" OD side bottom access port, and is mounted on 4 S/S legs.
OAD: 82" L x 72" W x 138" H
Feldmeier, 75 gallon capacity, 316 stainless steel single wall tank. Vessel dimensions: 30" diameter x 28" deep with 24" straight wall. Equipped with dome top, 16" man way with flip up / clamp down cover, CIP spray ball supplied by a 2"OD / 1½"ID Tri-Clamp fitting, (1) level sensor port, (1) temp probe port and (1) flush mount sensor port. Slant bottom has 2½" OD / 2" ID Tri-Clamp style bottom discharge with 11" ground clearance. (Level Sensor, temperature probe and flush mount sensor not included)
Top Access:(2) 2½"OD /2"ID Tri-Clamp(1) 4" ID Open Vent
Side Access:(1) 2"OD / 1½"ID Tri-Clamp
3-A Standard #: 32-02
OAD: 35"L x 32"W x 52"H
Cherry Burrell, 5,000 Gallon, 304 stainless steel tank. Vessel Dimensions: 106" diameter x 110" straight wall. Equipped with a dome top, dish bottom, 16" x 20" side manway with bolt down cover, 6½"OD / 6"ID Tri-clamp style bottom discharge with 50" ground clearance.
Bottom Access:(1) 2¼" NPT
Top Ports:(3) 4½" OD / 4" ID Tri-clamp
OAD: 126"L x 120"W x 156"H
Chem Tek, 226 gallon, 304 stainless steel, single wall tank. Vessel Dimensions: 38" diameter x 47" straight wall. Equipped with a lift up lid, 7" diameter side bottom prop style mixer powered by a ¾ hp drive and slant bottom with a 2" OD / 1½"ID seated beval style bottom discharge and 15" floor clearance. Mounted on (3) hip and socket legs.
OAD: 44" L x 40" W x 65" H
Sign up for our newsletter to receive the latest in packaging tips, case studies and more.