Form Fill Seal Machines

Multivac Form & Fill Thermoform R5200

• Manufacturer: Multivac
• Model Number: R5200
• Frain Number: 5H1611

Multivac Model R5200, inline, intermittent motion, roll-stock, form, fill and seal thermoformer with cycles and number of product per minute – depending on materials and application. Film width from 320mm to 620mm, with a maximum depth of 130mm and maximum cut-off length of 600mm. (Tooling is a change part required per application). Equipped with 28" long bottom film rolls on 2-1/2" OD cores with top and bottom flexable film forming dies, 112" long product load area with gas flush and stepper top driven dancer bars with 24" long film rolls on 2-1/2" OD cores, top and bottom seal dies with 24" long cross cut knifes and (2) sets of longital rotary sliters. Control panel has PLC controller with swing arm touch pad controls, panel view and start, stop, e-stop push buttons with Bellmark printers and Neslab refrigeration water cooler. Mounted on heavy duty frame with leveling legs.

OAD: 300" L x 48" W x 72" H

Cloud Packaging Form & Fill Volumetric SC24

• Manufacturer: Cloud Packaging Equipment
• Model Number: SC24
• Frain Number: 5G7846

Cloud, Model SC24, Horizontal, stainless steel, continuous motion, form / fill / seal machine. Rated from 100 to 800 pouches per minute – depending on materials and application. Set on 2-(7/8)" fixed centers film rollers. Pouches are made from roll stock called a web which is pulled from the rollers thru a forming plow that folds web lengthwise to form a pouch web strip which is then wrapped 180 Deg around a heated rotary drum sealer currently set on 2-(7/8)" centers to vertically heat seal web strip, vacuum transfer wheel takes web strip to the 24-station rotary powder or granular filler, the filled web strip is then pulled thru 9" long top heat sealing bar, to rotary knife wheel that cuts the web strip into individual pouches and a 8" wide x 50" long discharge conveyor.

OAD: 140"L x 49"W x 61"H

Inever Group / Matrix Form & Fill Liquid/Paste MLS6/10

• Manufacturer: Inever Group / Matrix
• Model Number: MLS6/10
• Frain Number: 5H4970

Inever Pack / Matrix Model MLS6/10, stainless steel, 10 head, vertical, stick pack, form / fill / seal machine rated 50 to 450 packets per minute – depending on materials and application. Minimum / Maximum packet size range: 17mm to 25mm in Width; 60mm to 200mm in Length. Equipped with stainless steel pressurized product hopper has sanitary pistons with liquid dosers and servo drives, both mounted above stick pack machine with CIP and ultrasonic level controls. Film slitters and forming tubes, with (10) 1" OD filling nozzles set on 2-1/2" centers, and 1" long vertical lap sealer with 25" wide cross-cut seal bars. Maximum film reel diameter of 600mm and maximum reel width of 600mm and has film registaration with 120" long x 2-1/4" wide incline cleated discharge conveyor with 3/4" wide x 3/4" high cleats set on 2-1/4" centers. Control panel has PLC controller with touch pad controls and readout, servo drives with vari-speed controller and start, stop, reset, e-stop push buttons and hand held controller. Stick Pack machine mounted on stainless steel base frame with interlock safety doors and statis light.

OAD: 80" L x 84" W x 89" H Stick Pack
120" L x 27" W x 56" H Inclined Conveyor

Circle Form & Fill Towelette V6B2

• Manufacturer: Circle
• Model Number: V6B2
• Frain Number: 5H4261

Circle, Model V6B2, vertical, 2-up, form fill and seal machine. Rated from 10 to 60 cycles per minute – depending on materials and application. Pouch size range: 2¼" to Unlimited in Length; 1" to 7" in Width. Equipped with film slitter, registration, tension assist, film assist pull wheels, 2-up towelette inserter, liquid filling system, tear notch punch, (4) lobe horizontal cross seal arbors, side sealers, cross cut knife. Control panel with visual display. Film specifications: up to 16" in Width; up to 14" in diameter; 3" core. Mounted on height adjustable base frame.

OAD: 70"L x 60"W x 85"H

Bartelt Form & Fill Auger IM714

• Manufacturer: Bartelt
• Model Number: IM714
• Frain Number: R29640

Bartelt Model IM714, Fully automatic intermittent motion form, fill, seal, machine rated from 10 to 100 pouches per minute – depending on materials and application. Pouch size range: 2" to 9-1/2" in Height 2" to 5-3/4" in Width and 2" thick. Equipped with 14 stations on 7" centers, double auger fillers with product settlers and pouch shaker stop, cleaning and sealing stations with vacuum pick-off. Controller has PLS 5000 Electro cam controls. Mounted on heavy duty frame with interlock safety guarding. Last running instant Oatmeal.

Emboss coder in seal available.

OAD: 216" L x 50" W x 100" H

AMI / Zippak Form & Fill Zipper Attachment D2500025

• Manufacturer: AMI / Zippak
• Model Number: D2500025
• Frain Number: 5G9757

AMI / Zippak, Model D-25000-25, Top zipper applicator. Rated from 10 to 60 cycles per minute – with number of pouch per minute – depending on materials, application and machine configuration. Used to apply a zipper closure to most vertical form, fill and seal machines. Equipped with 18" diameter zipper spool on a 1½" core and 27" wide film roll holder, Branson 900 BCA Advanced Unltrasonic end seal with 11" Seal bar and has control panel with touch pad interface controls. Mounted on a stainless steel frame with leveling legs.

OAD: 68"L x 50"W x 82"H

Circle Form & Fill No Filling Head H18P15D

• Manufacturer: Circle
• Model Number: H18P15D
• Frain Number: 5H0063

Circle Packaging, Model H18P15D, horizontal servo driven form, fill and seal machine. Rated from 10 to 60 cycles per minute with number of product – depending on materials, application and machine configuration. Film Specifications: up to 36" wide on 3" core. Equipped with 18" wide x 72" long transfer conveyor into sealing machine. Sealing head set with (15) lanes, (5/16") wide side seals, 18" wide (4) lobe end seal, tear notch station, slitters and knife cut off. Includes (2) stainless steel film roll carts. Control panel for the Circle has an AB controller and an AB PanelView 1000 touch screen display. Mounted on heavy duty frame.

** Available for and additional cost**

24" wide x 60" long infeed conveyor with adjustable lanes and (2) Branson, Model 2000, Ultra Sonic cutting heads mounted on a walking beam.

OAD: 135"L x 93"W x 81"H

Bartelt Form & Fill Auger SLITTER

• Manufacturer: Bartelt
• Model Number: SLITTER
• Frain Number: 5G8205

7" wide x 58" long (2) chain lugged conveyor. Equipped with fixed pockets on 9" centers, 3½" OD cutting wheel section and (4) suction cup reciprocating pick and place discharge. Mounted on (4) legs with leveling legs and a 31" to 35" infeed / discharge range.

OAD: 77"L x 29"W x 65"H

Southern Packaging Form & Fill Auger SPM 10-12

• Manufacturer: Southern Packaging
• Model Number: SPM 10-12
• Frain Number: R27800

Southern Packaging, Model SPM 10-12, automatic, horizontal, intermittent motion, form, fill, seal machine. Rated from 10 to 100 cycles per minute – depending on materials, application and machine configuration. Pouch size range: 2" to 8¾" in Length; 2" to 9½" in Height. Equipped with splice station with auto web tracking, zipper unwind, hole punch with scrap collection, lower and upper crush for gusset pouches, pouch feed chain system set on 10" centers, forming plow, film tension rollers, registration, side seal with parallel mounting bars, cut-off station, (12) clip stations, suction cup style pouch opener, Mateer servo auger filler, top heat seal bar, top seal cooling bar and pouch pick-off station. Film Specifications: 20" OD maximum film roll, with 28" maximum web width, on 3" OD core. Control panel with an AB controller, AB PanelView 550 touch pad display, push button start/stop and digital temperatue controllers. Mounted on heavy duty base frame.

OAD: 311"L x 58"W x 91"H

Noack Form & Fill Thermoform N916

• Manufacturer: Noack
• Model Number: N916
• Frain Number: 5H0412

Noack, Model N916, thermoform blister packaging machine. Rated from 10 to 60 cycles per minute – depending on materials, application and machine configuration. Maximum foil width: 6¼". Forming area: 5¼" x 5¼". Foil Roll: 8" OD on a 3" core. Blister Material Roll: 24" diameter on a 3" core. Equipped with (3) tracks, vibratory product feeder, brush box, flexible film dispense, 20" long heating plate, 5¼" x 5¼" forming plate, sealing station, perforation station, die cutting station with pick and place removal and waste rewind. Control Panel with touch pad controller and readout has start, stop, and e-stop controls. Mounted on base frame with height adjustable legs.

OAD: 132"L x 60"W x 72"H

Bartelt Form & Fill SLITTER

• Manufacturer: Bartelt
• Model Number: SLITTER
• Frain Number: 5G8199

4½" wide x 42" long (2) chain lugged conveyor. Equipped with fixed pockets on 7" centers, 3½" OD cutting wheel section and (2) suction cup reciprocating pick and place discharge. Mounted on (4) legs with leveling legs and a 34" to 39" infeed / discharge range.

OAD: 54"L x 29"W x 49"H

Bartelt Form & Fill SLITTER

• Manufacturer: Bartelt
• Model Number: SLITTER
• Frain Number: 5G8198

4½" wide x 42" long (2) chain lugged conveyor. Equipped with fixed pockets on 7" centers, 3½" OD cutting wheel section and (2) suction cup reciprocating pick and place discharge. Mounted on (4) legs with leveling legs and a 34" to 39" infeed / discharge range.

OAD: 54"L x 29"W x 49"H